| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Nezha Dashboard from 1.8.0 before 2.3.13 contains an improper locking vulnerability where a non-deferred mutex unlock leaks on a nil-map panic path. Any authenticated non-admin member can issue four notification API calls to permanently deadlock the alerting subsystem, then exhaust memory with blocking requests. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: Do not cancel requests in io target before it is initialized
A new nvme-fc controller in CONNECTING state sees admin request timeout
schedules ctrl->ioerr_work to abort inflight requests. This ends up
calling __nvme_fc_abort_outstanding_ios() which aborts requests in both
admin and io tagsets. In case fc_ctrl->tag_set was not initialized we
see the warning below. This is because ctrl.queue_count is initialized
early in nvme_fc_alloc_ctrl().
nvme nvme0: NVME-FC{0}: starting error recovery Connectivity Loss
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
lpfc 0000:ab:00.0: queue 0 connect admin queue failed (-6).
you didn't initialize this object before use?
turning off the locking correctness validator.
Workqueue: nvme-reset-wq nvme_fc_ctrl_ioerr_work [nvme_fc]
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x80
register_lock_class+0x567/0x580
__lock_acquire+0x330/0xb90
lock_acquire.part.0+0xad/0x210
blk_mq_tagset_busy_iter+0xf9/0xc00
__nvme_fc_abort_outstanding_ios+0x23f/0x320 [nvme_fc]
nvme_fc_ctrl_ioerr_work+0x172/0x210 [nvme_fc]
process_one_work+0x82c/0x1450
worker_thread+0x5ee/0xfd0
kthread+0x3a0/0x750
ret_from_fork+0x439/0x670
ret_from_fork_asm+0x1a/0x30
</TASK>
Update the check in __nvme_fc_abort_outstanding_ios() confirm that io
tagset was created before iterating over busy requests. Also make sure
to cancel ctrl->ioerr_work before removing io tagset. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects
In order to traverse or add/remove ap_matrix_mdev objects in the
matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held.
There are two functions that access the list without holding the mutex:
vfio_ap_mdev_probe function
~~~~~~~~~~~~~~~~~~~~~~~~~~~
The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock
mutex to guard the add of a newly created ap_matrix_mdev object to the
matrix_dev->mdev_list. This mutex does not protect list access; its purpose
is to guard against concurrent access to fields contained in an
ap_matrix_mdev object. This could lead to kernel memory corruption or
use-after-free if another mdev is created or removed concurrently.
The adding of an ap_matrix_mdev object to matrix_dev->mdev_list
is now guarded by the matrix_dev->guests_lock which is the correct
way to protect against concurrent mdev_list access.
Also removed the following two lines of code because the matrix_mdev is
allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger
and cfg_chg_trigger are already zero-initialised when the struct is
allocated before the call to vfio_register_emulated_iommu_dev. This
prevents a window whereby these triggers are set to NULL after
the device is exposed to userspace.
matrix_mdev->req_trigger = NULL;
matrix_mdev->cfg_chg_trigger = NULL;
vfio_ap_mdev_for_queue function
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The status_show function that supports display of the status attribute of
the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue
function which iterates the matrix_dev->mdev_list to find the object
representing the queue device whose status is to be displayed. In order to
traverse this list, the matrix_dev->guests_lock mutex must be held.
To fix this, the guests_lock mutex is taken prior to taking the
matrix_dev->mdevs_lock mutex in the status_show function. It is taken
there rather than the vfio_ap_mdev_for_queue function - where it is
needed - because it must be taken prior to the mdevs_lock mutex in order to
adhere to the proper locking order and prevent a lockdep splat; also
because the mdevs_lock is needed there to access fields within
the matrix_mdev object in that function.
See the vfio-ap-locking.rst in the linux kernel tree. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to clear dirty flag on folio in error path
If node block is corrupted due to chksum mismatch or inconsistent
footer info, it needs to drop clear flag of node folio, in order
to persist inconsistent node data to storage. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: avoid force-completing uninitialized UVD rings
uvd_v7_0_sw_init() does not initialize the UVD decode ring for an
SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes
the decode ring when restoring its fence sequence.
Skip fence completion when the fence driver is not initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: bail out of setup if the controller is inaccessible
xhci_gen_setup() locates the operational registers using the capability
length read from the very first register:
xhci->op_regs = hcd->regs +
HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
If the controller is dead or has dropped off the bus, that read returns
~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes
past the page-aligned MMIO base, i.e. unaligned. The first access
through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is
then an unaligned readl() on device memory. arm64 faults on unaligned
device accesses, so instead of xhci_handshake() catching the all-ones
value and returning -ENODEV, setup oopses:
xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible
xhci-pci-renesas 0005:08:00.0: xHCI Host Controller
xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1
Unable to handle kernel paging request at virtual address ffff80030a770103
ESR = 0x0000000096000021
FSC = 0x21: alignment fault
Internal error: Oops: 0000000096000021 [#1] SMP
pc : xhci_halt [xhci_hcd]
Call trace:
xhci_halt
xhci_gen_setup
xhci_pci_setup
usb_add_hcd
usb_hcd_pci_probe
xhci_pci_common_probe
xhci_pci_renesas_probe
This was hit with a Renesas uPD720201 that failed to power up ("Unable
to change power state from D3cold to D0, device inaccessible") yet still
reached the HCD probe path.
Read the capability register once, and if it reads back the all-ones
value (as xhci_handshake() and xhci_reset() already test for), abort
setup with -ENODEV before op_regs is derived from it. Reading it once
also avoids re-reading a register that may change under a concurrent
hot-removal. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mei: pass correct argument to function
The first argument to iwl_mei_write_cyclic_buf() should be the cldev
but the q_head pointer is passed instead. Fix it. |
| Improper initialization in an ASUS certain motherboard allows an physically proximate user to read or write arbitrary memory by inserting a specially crafted device. |
| The sandbox that isolates document conversion on a Kiteworks appliance did not fully confine the code running inside it. Code already executing within that sandbox could potentially escape its confinement and act with the privileges of the service account that runs the application, which could allow an attacker in that position to read or modify application data and configuration, or to disrupt the service on the affected appliance. |
| NVIDIA vGPU Virtual GPU Manager for Linux contains a vulnerability where an attacker could cause incorrect resource transfer between spheres. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Windows contains a vulnerability in the kernel module where a user could cause improper locking. A successful exploit of this vulnerability might lead to denial of service. |
| Werkzeug is a comprehensive WSGI web application library. Prior to 3.1.9, the safe_join function used by send_from_directory can allow a NUL: special-device path because safe_join checks the Windows device name without first removing an empty NTFS ADS marker. The trigger is that an application runs on Windows with NTFS and serves a user-specified path ending in a special device name such as NUL:. The attack mechanism is that a requested path ends in a Windows special device name with an empty ADS marker. The impact is that the special device opens successfully and the file read hangs indefinitely. This issue is fixed in version 3.1.9. |
| Pexip Infinity before 38.2, plus 39.0, 39.1, and 40.0, is affected by improper input validation within an internal Pexip Infinity service that allows an attacker with local access to escalate privileges to root. Exploitation requires an attacker to be able to run arbitrary code on a node by either achieving remote code execution via some other vulnerability or having administrative access to the operating system. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel special fields when recycling rhtab elements
rhtab_map_update_existing() and rhtab_delete_elem() call
bpf_obj_free_fields() when replacing or deleting a value. These map
operations can run from BPF programs in NMI context, where releasing a
referenced kptr or another complex field is not generally safe.
Array and hash maps avoid that problem by cancelling only the asynchronous
fields which can be stopped safely in the caller context. Other ownership
state remains attached to the allocation until its memory allocator
destructor performs the final cleanup.
Use bpf_obj_cancel_fields() for the corresponding rhtab paths as well. This
cancels timers, workqueues, and task work while allowing rhtab_mem_dtor() to
release referenced kptrs when the allocation is eventually destroyed.
[ kkd: Rebased, used direct helper calls, and rewrote the commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
sashiko says:
If map_addr() changes the packet length, such as when the public NAT IP
string is shorter or longer than the internal IP, coff will still point to
the offset relative to the pre-mangled packet.
If the packet shrinks, coff could overshoot the correct position,
potentially causing the next ct_sip_parse_header_uri() call to silently
skip bytes and miss subsequent Contact headers. Could this lead to a
failure to NAT those subsequent headers and leak internal network details? |
| Multiple BinSoft products are vulnerable to Remote Command Execution. An authorized user with access to the application and direct access to the backend database can achieve system command execution by uploading an attachment and modifying its storage path in the database to reference an attacker-controlled remote network resource. Alternatively, it is possible to use a previously uploaded file and change its reference. When the application processes the attachment, and a user tries to open it, the referenced resource is executed by the system.
Critically, this vulnerability can be exploited by any unauthenticated attacker by chaining it with CVE-2026-40550 and CVE-2026-40551, which allows obtaining database access, and logging onto any account.
The described issue affects all published versions. The vendor stated that this issue is a direct result of the architecture model in which the software is distributed, and that it will be mitigated with a corrected installation manual. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, the SMTP MIME parser in rust/src/mime/smtp.rs does not fully reset state when processing Content-Type: message/rfc822 encapsulation. An outer MIME part's encoding or filename state can leak into the inner message, allowing crafted mail to evade detections based on file.data, file.name, or extracted URLs when SMTP MIME decoding is enabled. This issue is fixed in version 8.0.6. |
| Ghidra before 12.1.4 fails to validate the TYPE_COL byte in OptionsDB.createUnregisteredOption(), causing an ArrayIndexOutOfBoundsException that leaves domain objects permanently locked. Attackers can craft a malicious program database file that, when imported, causes the application to stall and prevents resource cleanup or graceful shutdown. |
| Improper Exposure of Resource to Wrong Sphere in the host file helper (gofer) in Google gVisor prior to commit 573a9e73cf844f on Linux platforms with CUSE enabled allows a local attacker with container image deployment privileges to achieve root code execution on the host system. By including a /dev/cuse character device node in a container image, opening the device passes through to the host, allowing the sandboxed attacker to register a host device and exploit CUSE unrestricted ioctl handling to overwrite root udev helper memory. |
| On Windows, PHP's filesystem and stream APIs do not reject reserved device names such as CON, PRN, AUX, NUL, COM1 to COM9, LPT1 to LPT9, CONIN$ and CONOUT$ when they appear as a component of a path. An attacker-controlled filename therefore reaches CreateFileW() and opens a device instead of the regular file the application expected, which can block or hang the request and exhaust worker processes. |
