| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Mitigation bypass in the Storage: Cache API component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Maps is a MediaWiki extension that enables visualization of geographic data through dynamic embedded maps. Prior to version 12.1.3, the display_map parser function in the Leaflet service accepts attacker-controlled HTML in the overlays parameter, and resources/leaflet/jquery.leaflet.js uses the overlay name as a Leaflet layer-control label without escaping it. A wiki user with the edit permission can store malicious wikitext that causes script execution when another user previews or views the affected map. The script executes in the viewing user's browser session and can access data or perform actions available to that user. This issue is fixed in version 12.1.3. |
| AngleSharp is a .NET library for parsing angle bracket based hyper-texts. Prior to 1.5.0, MathAnnotationXmlElement in AngleSharp/Mathml/Dom/Internal/MathAnnotationXmlElement.cs is not treated as an HTML integration point when its encoding attribute is text/html or application/xhtml+xml, causing Consume in AngleSharp/Html/Parser/HtmlDomBuilder.cs to route tokens through foreign-content parsing instead of HTML parsing. A sanitizer can therefore observe a different DOM from the browser that reparses the serialized output. An attacker can combine this namespace differential with markup-breaking characters in an attribute value so that an element hidden from the sanitizer becomes active script-capable HTML after browser reparse, resulting in mutation cross-site scripting. This issue is fixed in version 1.5.0. |
| authentik is an open-source identity provider. Prior to 2026.2.6 and 2026.5.5, the enterprise Google Chrome device-trust stages advance the flow without confirming that the out-of-band device attestation actually ran. Affected enterprise deployments place either a Google Chrome Endpoint stage with mode set to REQUIRED or the deprecated Google Chrome Device Trust Connector stage in an authentication flow. The device attestation occurs in a verification iframe that calls the Google Verified Access API and records the verified device on success, but the vulnerable stages treat the flow as passed as soon as the stage is submitted. An attacker who can reach such a stage, including after primary username and password authentication, can skip the verification iframe and authenticate from a device that was never verified. Where device trust is the only additional factor, that protection is fully bypassed, while other configured factors remain in force. This issue is fixed in versions 2026.2.6 and 2026.5.5. |
| Mitigation bypass in the Data Loss Prevention component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Eclipse Kura versions prior to 5.6.2 trust the client-supplied X-Forwarded-For HTTP header as the authoritative source of the client IP address in audit log entries. The org.eclipse.kura.web2 (Web Console) and org.eclipse.kura.rest.provider (REST API) components use this header as the primary IP source when initializing audit context, and org.eclipse.kura.jetty.customizer unconditionally installs Jetty's ForwardedRequestCustomizer on all HTTP/HTTPS connectors, causing HttpServletRequest.getRemoteAddr() to reflect the attacker-controlled header value. An unauthenticated remote attacker can exploit this vulnerability to bypass IP-based brute-force protections — such as fail2ban — by spoofing the logged IP address to a non-routable value, allowing a brute-force attack to proceed undetected, or to cause a denial of service against a third party by injecting a victim's IP address and triggering a ban on that address. |
| A vulnerability was detected in Alaev SEO Tools Extension up to 1.0.10 on Chrome. This impacts the function addDiv of the file src/popup.html of the component Popup UI. Performing a manipulation results in basic cross site scripting. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| HTML Injection in the public subscription form in maalfer MailerUp before 1.1.3 allows unauthenticated remote attackers to have the application send a message carrying arbitrary HTML, to an attacker-chosen address and from the form owner's configured sending identity, via the first_name field of the subscription request, which is interpolated unescaped into the double opt-in verification email. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - copy IV using skcipher ivsize
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cyw: fix heap overflow on a short auth frame
brcmf_notify_auth_frame_rx() takes the frame length from the firmware
event and copies the frame body with the management header offset
subtracted:
u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data);
...
memcpy(&mgmt_frame->u, frame,
mgmt_frame_len - offsetof(struct ieee80211_mgmt, u));
The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len
can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When
mgmt_frame_len is below that, the subtraction wraps as an unsigned value to
a huge length. The memcpy then runs far past the kzalloc'd buffer. A
malicious or malfunctioning AP can make the frame short during the
external SAE auth exchange, so this is a remotely triggered heap overflow.
Reject frames shorter than the management header offset before the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: validate firmware patch bounds
rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.
The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch. |
| A flaw has been found in Webkul Bagisto up to 2.4.4. The affected element is an unknown function of the file /customer/register of the component Customer-Registration Notification Email. This manipulation of the argument first_name/last_name causes basic cross site scripting. It is possible to initiate the attack remotely. The exploit has been published and may be used. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: use sk_msg_free_partial to fix partial send
sk_msg_free_partial() ensures consistency of the skmsg at every
iteration, without having to manually handle uncharges and offsets.
This simplifies the code, and fixes some bugs in skmsg accounting when
we don't send the full contents. |
| XSS vulnerability in Markdown handling in Apache Allura.
This issue affects Apache Allura: from 1.10.0 before 1.19.1.
Users are recommended to upgrade to version 1.19.1, which fixes the issue. |
| XSS vulnerability in code display in Apache Allura.
This issue affects Apache Allura: before 1.19.1.
Users are recommended to upgrade to version 1.19.1, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-control: Fix TOCTOU in sof_ipc4_bytes_put
In sof_ipc4_bytes_put(), the copy size is derived from the old
data->size in the buffer rather than the incoming new data's size
field from ucontrol. If the new data has a different size, the copy
uses the wrong length: it may truncate valid data or copy stale bytes.
Fix by validating and using the incoming data's sof_abi_hdr.size from
ucontrol before copying. |
| A reflected cross-site scripting issue exists in URL handling. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix zeropoint update where i_size > remote_i_size
Fix the update of the zero point[*] by netfs_release_folio() when there is
uncommitted data in the pagecache beyond the folio being released but the
on-server EOF is in this folio (ie. i_size > remote_i_size). The update
needs to limit zero_point to remote_i_size, not i_size as i_size is a local
phenomenon reflecting updates made locally to the pagecache, not stuff
written to the server. remote_i_size tracks the server's i_size.
[*] The zero point is the file position from which we can assume that the
server will just return zeros, so we can avoid generating reads.
Note that netfs_invalidate_folio() probably doesn't need fixing as
zero_point should be updated by setattr after truncation or fallocate.
Found with:
fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \
/xfstest.test/junk --replay-ops=junk.fsxops
using the following as junk.fsxops:
truncate 0x0 0x1bbae 0x82864
write 0x3ef2e 0xf9c8 0x1bbae
write 0x67e05 0xcb5a 0x4e8f6
mapread 0x57781 0x85b6 0x7495f
copy_range 0x5d3d 0x10329 0x54fac 0x7495f
write 0x64710 0x1c2b 0x7495f
mapread 0x64000 0x1000 0x7495f
on cifs with the default cache option.
It shows read-gaps on folio 0x64 failing with a short read (ie. it hits
EOF) if the FMODE_READ check is commented out in netfs_perform_write():
if (//(file->f_mode & FMODE_READ) ||
netfs_is_cache_enabled(ctx)) {
and no fscache. This was initially found with the generic/522 xfstest. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: dfl: add bounds check in dfh_get_param_size()
dfh_get_param_size() can return a parameter size larger than the feature
region because the loop bounds check is evaluated before incrementing
size. If the EOP (End of Parameters) bit is set in the same iteration,
the inflated size is returned without re-validation against max.
This can cause create_feature_instance() to call memcpy_fromio() with a
size exceeding the ioremap'd region when a malicious FPGA device provides
crafted DFHv1 parameter headers.
Add a bounds check after the size increment to ensure the accumulated
size never exceeds the feature boundary. |
