| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Protection mechanism failure in Mobile in Google Chrome on on iOS prior to 155.0.8059.39 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| Incorrect reference resolution in Passwords in Google Chrome on on iOS prior to 155.0.8059.39 allowed a local attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a local program. (Chromium security severity: Medium) |
| Incorrect provision of specified functionality in Mobile in Google Chrome on on iOS prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to bypass web origin policy via crafted network traffic. (Chromium security severity: Medium) |
| Incorrect authorization in Extensions in Google Chrome prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted Chrome extension. (Chromium security severity: Medium) |
| NVIDIA TensorRT contains a vulnerability where an attacker can cause an out of bounds read. A successful exploit of this vulnerability may lead to denial of service. |
| When migrating a repository from another Gitea instance, Gitea used the page size reported in the source server's API settings to end its paginated downloads. A source that reported `max_response_items` as `0` made these loops run indefinitely and grow server memory until it was exhausted. Any user who can migrate repositories could point a migration at a server they control and cause a denial of service. |
| The Gitea web route for deleting tags (`POST /{owner}/{repo}/tags/delete`) requires only write access to the Code unit, but shares its handler with release deletion and did not check that the target was a plain tag. A collaborator with Code write access and without Releases write access could permanently delete published releases of that repository, including their attachments. Protected tag rules covering the release tag still blocked the deletion. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential OOB read in smb3_enum_snapshots()
If snapshot_array_size is smaller than GMT_TOKEN_SIZE,
smb3_enum_snapshots() sets ret_data_len to
sizeof(struct smb_snapshot_array) without verifying the actual length
of the server's reply.
Because SMB2_ioctl() places no lower bound on the server-supplied
OutputCount and allocates retbuf to exactly that length, a short reply
results in ret_data_len exceeding the size of retbuf. The subsequent
copy_to_user() then reads past the end of retbuf, leaking adjacent slab
memory to userspace. The subsequent clamp check is ineffective as it
only reduces ret_data_len.
Fix this by rejecting replies shorter than
sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set
to the 12-byte struct size rather than the 16-byte
MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes
is exactly what copy_to_user() attempts to read. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs
Fix several related bounds checking and pointer lifecycle issues in
receive_encrypted_standard()'s handling of compound encrypted frames:
- Clear next_buffer after assigning it to server->bigbuf. A stale
next_buffer pointer can lead to a use-after-free on subsequent
error paths.
- Update pdu_length to the decrypted plaintext size (buf_size). Using
the pre-decryption length allows NextCommand to point into stale
ciphertext residue.
- Reject next_cmd values smaller than MID_HEADER_SIZE(server).
- Fix an integer overflow in the upper bound check by verifying
pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the
trailing slice is large enough for a header. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix smbd_connection leak on cifs_get_tcp_session() error
When an RDMA connection is successfully established via
smbd_get_connection() but cifs_get_tcp_session() later fails (e.g.
kthread_create() returns an error), the error path frees tcp_ses
without first destroying the smbd_connection.
Fix this by calling smbd_destroy() in the out_err cleanup path before
kfree(tcp_ses). smbd_destroy() safely handles the case where
smbd_conn is NULL, so it can be called unconditionally. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of iface in cifs_try_adding_channels()
cifs_try_adding_channels() iterates ses->iface_list with
list_for_each_entry_safe_from(), which captures the next entry
(niface) under iface_lock. The loop body then drops iface_lock for
the whole duration of cifs_ses_add_channel().
A concurrent interface refresh (SMB3_request_interfaces() ->
parse_server_interfaces()) marks all ifaces inactive and removes and
frees any that are not re-advertised via list_del() + kref_put(),
where release_iface() is a bare kfree(). Since niface typically has
no channel holding a reference, the list reference is its last and it
can be freed inside the unlocked window. On continue, the iterator
advance step then dereferences niface->iface_head.next, and the loop
body reads iface->rdma_capable/is_active, both on freed memory.
Fix this by never keeping an unreferenced list pointer across the
unlocked window. Each channel attempt now re-scans the list from the
head under iface_lock, takes a kref on the selected candidate, and
passes only that referenced candidate to cifs_ses_add_channel().
weight_fulfilled still tracks selection progress, so restarting the
scan preserves the original weighted distribution and the
weight_fulfilled-before-kref_put ordering on the failure path.
Add a per-pass attempts cap so a flapping interface refresh cannot
keep the inner loop spinning within a single tries increment. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix rlist race and missing initialization
TCP_Server_Info.rlist is allocated via kzalloc which zeros both ->next
and ->prev to NULL instead of pointing to itself, making list_empty()
always return false and list_add() dereference a NULL ->prev pointer.
Also, cifs_signal_cifsd_for_reconnect() can be called concurrently
from multiple cifsd threads, allowing the same server's rlist node to
be added twice into the local list, corrupting it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Avoid integer underflow with ffs in EOP ring size calc
The low 6 bits of cp_hqd_eop_control store the base-2 logarithm
of the EOP ring size. This was calculated as
ffs(q->eop_ring_buffer_size / sizeof(unsigned int)) - 1 - 1
But ffs can in theory return 1 or 0, so this could underflow
(although in practice the ring buffer size cannot be less than 4096).
Change this to
ffs(q->eop_ring_buffer_size / sizeof(unsigned int) / 4)
using properties of logarithms.
(cherry picked from commit 4f18c56630383c14bfc6b2d65f88f2f895d2121a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: fix out-of-bounds write in gud_plane_atomic_check()
The plane property loop uses req->properties[num_properties + i] as write
index while simultaneously incrementing `num_properties` inside the loop.
At iteration i, num_properties has also incremented by i, so the write
is done at `initial_num_properties + 2*i`, skipping every other index and
advancing by 2 per iteration.
With just 2 connector and 32 plane properties the last write happens at
index 64, one slot past the end of the 64-slot (indices 0–63)
allocation. A USB device can trigger OOB by advertising the maximum
number of properties.
Fix by dropping the redundant `+ i`; num_properties is already the correct
running index, as gud_connector_fill_properties() fills the preceding
slots. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: prevent authentication frame length truncation
mwifiex_cfg80211_authenticate() derives the authentication frame length
from req->ie_len and req->auth_data_len, both of type size_t, but stores
it in a u16.
NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is
a u16, a single attribute can carry up to 65531 bytes of payload, so the
sum can exceed U16_MAX before it is assigned to pkt_len. The truncated
pkt_len determines the skb frame area, while the copy length remains
req->auth_data_len - 4, resulting in a heap buffer overflow.
For example, with auth_data_len equal to 65510 and no IEs, the sum is
65546. It is truncated to 10 and then reduced by four to 6. The driver
appends only six bytes to the skb with skb_put(), but then copies 65506
user-provided bytes into the authentication body.
Reaching this path requires CAP_NET_ADMIN in the user namespace owning
the network namespace, an up station netdev, and a suitable BSS/SAE
authentication request.
Compute the length in size_t, reject values that cannot be represented by
the firmware's u16 frame length field, and only then assign it to pkt_len. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count
SWAP_USAGE_OFFLIST_BIT is embedded in the si->inuse_pages usage counter,
and is meant to sit above any value that counter can reach. However, it
is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system
with 4 KiB pages the flag collides with the usage count once that count
reaches 4 TiB.
swap_usage_in_pages() masks bit 30 out, so whenever the real count has
that bit set, every caller of it reads 4 TiB low:
* /proc/swaps understates Used by 4 TiB.
* A raw count of exactly 2^30 masks to zero, so try_to_unuse() takes its
"if (!swap_usage_in_pages(si)) goto success;" early exit and swapoff
tears the device down while pages are still swapped out. Nothing in
the rest of swapoff aborts the teardown, so those pages are lost.
Independently of swapoff, the collision also corrupts the counter and the
plist. On a device in normal use, a free that leaves bit 30 set in the
count makes swap_usage_sub() see the flag where there is only count, and
call add_to_avail_list(). It clears the bit with
fetch_and(~SWAP_USAGE_OFFLIST_BIT), leaving the stored count 4 TiB below
the real one, and calls plist_add() on a device that is already listed,
tripping the WARN_ON(!plist_node_empty(node)) in plist_add() and linking
the node a second time.
Change the definition of SWAP_USAGE_OFFLIST_BIT to be based on
atomic_long_t instead. Note that the usage counter field itself is of
this same type, so it is still a valid bit. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: fix RX checksum use-after-free
lan743x_rx_process_buffer() adds each non-first receive buffer to the
head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb()
linearizes the head and frees the fragment skb metadata.
The checksum-success path then writes ip_summed through the local skb
pointer, which still points to the final fragment. This causes a
use-after-free write when a packet spans more than one receive buffer.
Set ip_summed on the surviving head skb instead. Multi-buffer receive
can occur after a live MTU increase because existing ring entries keep
their old buffer size until they are replenished.
A KUnit test invoking lan743x_rx_process_buffer() with a two-buffer
packet produced a one-byte KASAN use-after-free write before this change.
The same test passed after the change. The driver object also builds
with W=1. This was not tested on physical LAN743x hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix handling of NFSEXP_PNFS in the netlink codepath
The rework of how block layouts were checked moved the check for
NFSEXP_PNFS out of nfsd4_setup_layout_type() and into the callers. That
patch didn't account for the new call in nfsd4_setup_layout_type(). |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: avoid reallocating confirmed conntrack labels
ovs_ct_get_conn_labels() adds the labels extension when a conntrack
entry does not have one. Confirmed conntracks can be read locklessly,
so adding an extension may reallocate and free the extension block
while another CPU accesses it.
Only add the extension for unconfirmed conntracks. A confirmed
conntrack without labels now fails the caller's label operation instead
of reallocating its extension storage. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libahci: clear PxCLBU and PxFBU for AHCI_HFLAG_32BIT_ONLY
A user reported that commit 105c42566a55 ("ata: ahci: force 32-bit DMA for
JMicron JMB582/JMB585") made the JMicron JMB585 unusable on his board.
The failure is seen as soon as the ahci driver is probed, and booting with
iommu=off does not solve the problem.
Looking at the AHCI specification, PxCLBU and PxFBU are both read only '0'
for HBAs that do not support 64-bit addressing.
For HBAs that do support 64-bit addressing, the registers are read write,
with a reset value that is Implementation Specific.
When using the AHCI_HFLAG_32BIT_ONLY flag, the HBA does support 64-bit
addressing, and a 32-bit DMA mask is set by simply clearing HOST_CAP_64.
Thus, in this case, we need to explicitly clear the registers to 0. |
