| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been found in Yealink SIP-T46U 108.86.0.118. This affects the function mod_upgrade.SparePartsUpload of the file /api/upgrade/accupgradebychunk of the component Firmware Chunk Upload handler. Such manipulation of the argument uid leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure and is working on a patch to fix it. |
| A vulnerability was detected in Yealink SIP-T46U 108.87.50.1. The affected element is the function StartReportInformation of the file /api/inner/beforewifitest of the component Web FastCGI Service. The manipulation of the argument port results in stack-based buffer overflow. Access to the local network is required for this attack. The exploit is now public and may be used. The vendor was contacted early about this disclosure and is working on a patch to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Bounds-check devid in __rlookup_amd_iommu()
iommu_device_register() walks every device on the PCI bus via
bus_for_each_dev() and calls amd_iommu_probe_device() for each. The
inlined check_device() path computes the device's sbdf, calls
rlookup_amd_iommu() to find the owning IOMMU, and only afterwards
verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes
rlookup_table[devid] with no bounds check of its own, so for a PCI
device whose BDF is not described by the IVRS, the lookup reads past
the end of the allocation before the caller's bounds check can run.
This was harmless before commit e874c666b15b ("iommu/amd: Change
rlookup, irq_lookup, and alias to use kvalloc()"): the table was a
zeroed page-order allocation, so the over-read returned NULL and the
caller's NULL check skipped the device. After that commit the table is
a tight kvcalloc() and the over-read returns adjacent slab contents,
which check_device() then dereferences as a struct amd_iommu *,
causing a boot-time GPF.
Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS
describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at
00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation,
into the adjacent kmalloc-512 slab object:
pci 0000:00:04.0: Adding to iommu group 0
pci 0000:00:05.0: Adding to iommu group 1
pci 0000:00:06.0: Adding to iommu group 2
pci 0000:00:07.0: Adding to iommu group 3
Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025
RIP: 0010:amd_iommu_probe_device+0x54/0x3a0
Call Trace:
__iommu_probe_device+0x107/0x520
probe_iommu_group+0x29/0x50
bus_for_each_dev+0x7e/0xe0
iommu_device_register+0xc9/0x240
iommu_go_to_state+0x9c0/0x1c60
amd_iommu_init+0x14/0x40
pci_iommu_init+0x16/0x60
do_one_initcall+0x47/0x2f0
Guard the array access in __rlookup_amd_iommu(). With the fix applied
on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots. |
| RTKLIB through 2.4.3 contains an out-of-bounds read vulnerability in getcodepri function when processing unrecognized RINEX observation codes, allowing attackers to trigger denial of service. Crafted RINEX files with unknown observation types cause negative array indexing into the codepris table, resulting in reliable crashes and potential memory disclosure of adjacent global data. |
| The webp decoder can panic when processing a VP8 chunk with dimensions that do not match the canvas size. |
| Dragonfly is an in-memory data store built for modern application workloads. Prior to 1.39.0, a crafted RESTORE payload triggers an out-of-bounds read in DragonflyDB's listpack collection loaders, crashing the entire server process (SIGSEGV). Because DragonflyDB requires no authentication by default and RESTORE is a normal keyspace command, an unauthenticated remote attacker can crash the server with a single ~24-byte command — a remote, repeatable denial of service. This vulnerability is fixed in 1.39.0. |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.34.0 until 1.35.13, 1.36.9, 1.37.5, and 1.38.3, a vulnerability exists in Envoy's TCP StatsD sink (TcpStatsdSink), where the thread-local flusher buffer can be overflowed by exceptionally long statistic names (e.g., >16KiB). During formatting, TcpStatsdSink reserves a single contiguous memory slice of 16KiB (FLUSH_SLICE_SIZE_BYTES). If formatting a single metric exceeds the remaining capacity, the flusher initiates a buffer rotation but incorrectly continues to allocate another fixed 16KiB slice. If an attacker can trigger a statistic name longer than 16KiB—for example, by sending an HTTP or gRPC request with an extremely long request path (:path) that is recorded by the grpc_stats filter configured with stats_for_all_methods: true—the flusher will attempt to copy the metric name using memcpy operations beyond the allocated heap buffer boundaries. This leads to a heap write overflow, which can cause immediate denial-of-service (process crash) or potential remote code execution (RCE). This vulnerability is fixed in 1.35.13, 1.36.9, 1.37.5, and 1.38.3. |
| A heap overflow in the FSViewer.exe process of FastStone Image Viewer v8.3 allows attackers to cause a execute arbitrary code in the context of the current process via supplying a crafted JPEG 2000 (JP2) file. |
| The KTLS receive path decrypted each record in place, assuming that the mbufs holding received data were anonymous and safe to modify. This assumption does not hold for data placed on a socket by sendfile(2), which can reference file-backed memory directly through non-anonymous M_EXTPG pages or EXT_SFBUF mbufs. When the sender transmits such data over a loopback connection without enabling KTLS on the transmit side, the file-backed mbufs reach the receiver's decryption path unchanged. Decrypting a record in place then overwrites the backing file's page cache instead of a private copy of the data.
An unprivileged local user who can read a file can overwrite its contents with data of their choosing by sending the file over a loopback connection on which they have enabled KTLS receive. The write modifies the page cache directly, so it bypasses file flags such as schg and is written back to disk. By overwriting a setuid binary or other trusted file, a local user can escalate privileges, potentially gaining full control of the affected system. |
| Vim is an open source, command line text editor. From 9.2.0320 until 9.2.0679, a crafted undo or swap file can store a virtual-text property whose offset and length point outside the line's property data. When Vim restores or displays such a line it converts the offset into a pointer and reads the virtual text without bounds checking, causing an out-of-bounds read that can crash Vim or disclose adjacent heap memory. This vulnerability is fixed in 9.2.0679. |
| An unauthenticated
stack-based buffer overflow vulnerability exists in ssvr in GeoVision
GV-LPC2011 and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by
insufficient bounds checking when parsing RTSP Digest authentication fields. A
remote attacker may exploit this vulnerability by sending a crafted RTSP
request containing overly long authentication data, resulting in memory
corruption, denial of service, or potentially arbitrary code execution. |
| An unauthenticated
stack-based buffer overflow vulnerability exists in vlsvr in GeoVision
GV-LPC2011 and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by
insufficient length validation when processing remote login data. A remote
attacker may exploit this vulnerability by sending crafted login data with
overly long input, resulting in memory corruption, denial of service, or potentially
arbitrary code execution. |
| An unauthenticated
stack-based buffer overflow vulnerability exists in thttpd in GeoVision
GV-LPC2011 and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by
insufficient bounds checking when processing web request parameters in a
specific request path. A remote attacker may exploit this vulnerability by
sending a crafted HTTP request with overly long input, resulting in memory
corruption, denial of service, or potentially arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/adfs: validate nzones in adfs_validate_bblk()
Reject ADFS disc records with a zero zone count during boot block
validation, before the disc record is used.
When nzones is 0, adfs_read_map() passes it to kmalloc_array(0, ...)
which returns ZERO_SIZE_PTR, and adfs_map_layout() then writes to
dm[-1], causing an out-of-bounds write before the allocated buffer.
adfs_validate_dr0() already rejects nzones != 1 for old-format
images. Add the equivalent check to adfs_validate_bblk() for
new-format images so that a crafted image with nzones == 0 is
rejected at probe time.
Found by syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Clamp VBIOS HDMI retimer register count to array size
[Why & How]
The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and
Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C
register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9]
and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated
before use, so a malformed VBIOS can specify values up to 255, causing an
out-of-bounds heap write during driver probe.
Clamp each register count to the destination array size using min_t()
before the copy loops, in both get_integrated_info_v11() and
get_integrated_info_v2_1().
(cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: dummy: fix UMP event stack overread
The dummy sequencer port forwards events by copying an incoming
struct snd_seq_event into a stack temporary, rewriting source and
destination, and dispatching the temporary to subscribers. That legacy
event storage is smaller than struct snd_seq_ump_event.
When a UMP event reaches the dummy client, the copy leaves the UMP flag
set but only provides legacy-sized stack storage. The subscriber
delivery path then uses snd_seq_event_packet_size() and copies a
UMP-sized packet from that stack object, reading past the end of the
temporary.
Use the existing union __snd_seq_event storage and copy the packet size
reported for the incoming event before rewriting the common routing
fields. This preserves the full UMP packet for UMP events while keeping
legacy event handling unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
In mrp_pdu_parse_vecattr(), vector attribute events are encoded three
per byte and valen tracks the number of events left to process.
The parser decrements valen after processing the first and second events
from each event byte, but not after processing the third one. When valen
is exactly a multiple of three, the loop continues after the last valid
event and consumes the next byte as a new event byte, applying a
spurious event to the MRP applicant state.
Additionally, when valen is zero the parser unconditionally consumes
attrlen bytes as FirstValue and advances the offset, even though per
IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of
zero and no FirstValue or Vector fields. This corrupts the offset for
subsequent PDU parsing.
Also, when valen exceeds three the loop crosses byte boundaries but
the attribute value is not incremented between the last event of one
byte and the first event of the next. This causes the first event of
the next byte to use the same attribute value as the third event
rather than the next consecutive value.
Decrement valen after processing the third event, skip FirstValue
consumption when valen is zero, and increment the attribute value at
the end of each loop iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate advertising TLV before type checks
tlv_data_is_valid() reads each advertising data field length from
data[i], then inspects data[i + 1] for managed EIR types before
checking that the current field still fits inside the supplied buffer.
A malformed field whose length byte is the last byte of the buffer can
therefore make the parser read one byte past the advertising data.
KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING
request reached that path:
BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid()
Read of size 1
Call trace:
tlv_data_is_valid()
add_advertising()
hci_mgmt_cmd()
hci_sock_sendmsg()
Move the existing element-length check before any type-octet inspection
so each non-empty element is proven to contain its type byte before the
parser looks at data[i + 1]. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()
build_i2c_fw_hdr() allocates a fixed-size buffer of
(16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then
copies le16_to_cpu(img_header->Length) bytes into it without
validating that Length fits within the available space after the
firmware record header.
img_header->Length is a __le16 from the firmware file and can be
up to 65535. check_fw_sanity() validates the total firmware size
but not img_header->Length specifically.
Fix by rejecting images where img_header->Length exceeds the
available destination space. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR
signaling packets up to the channel MTU and dispatches each command
without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer
within radio range can send a fixed-channel CID 0x0001 packet that is
larger than MTUsig and contains many L2CAP_ECHO_REQ commands before
pairing. In a real-radio stock-kernel run, one 681-byte signaling
packet containing 168 zero-length ECHO_REQ commands made the target
transmit 168 ECHO_RSP frames over about 220 ms.
Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can
force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling
packet containing packed ECHO_REQ commands.
Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and
reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP
carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched.
The Bluetooth Core spec wording for MTUExceeded says the reject
identifier shall match the first request command in the packet, and
that packets containing only responses shall be silently discarded.
Linux intentionally deviates from that prescription: silently
discarding desynchronizes the peer because the remote stack never
learns its responses were dropped, and locating the first request
command requires walking command headers past MTUsig, i.e. processing
bytes from a packet we have already decided is too large to process.
We therefore always emit one reject and use the identifier from the
first command header, a single fixed-offset byte read.
The unrestricted BR/EDR signaling parser and ECHO_REQ response path both
trace to the initial git import; no later introducing commit is
available for a Fixes tag. |
