| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was determined in TRENDnet TEW-821DAP 2.2.01b05. Affected is the function popen/system of the file /cgi-bin/ping.cgi of the component ssi. Executing a manipulation of the argument ipaddr can lead to command injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. |
| LMDeploy deserializes disaggregated-serving peer messages with pickle. The handle_zmq_recv coroutine in lmdeploy/pytorch/disagg/conn/engine_conn.py reads peer-to-peer cache-free requests with recv_pyobj(), which deserializes the received bytes with pickle.loads(), and the isinstance check against DistServeCacheFreeRequest runs only after deserialization has already completed. The peer that supplies those bytes is caller-controlled: p2p_connect passes remote_engine_endpoint_info.zmq_address from the request body to connect() on the ZMQ PULL socket, and the POST /distserve/p2p_initialize and /distserve/p2p_connect endpoints in lmdeploy/serve/openai/api_server.py apply no authentication unless the server is started with api_keys, which defaults to None. A remote attacker can direct an engine to pull from a ZMQ endpoint under their control and execute arbitrary code in the engine process. Deployments that do not enable disaggregated serving are not affected, because the receive loop is only started once the migration backend accepts the connection. |
| Tina is a headless content management system. Prior to 2.5.2, the TinaCMS CLI package's Vite dev server packages/@tinacms/cli/src/next/vite/cors.ts origin callback returns false for a disallowed origin but does not reject the request, and packages/@tinacms/cli/src/next/vite/plugins.ts still routes POST /media/upload/* to mediaRouter.handlePost. The upload code in packages/@tinacms/cli/src/next/commands/dev-command/server/media.ts writes attacker-controlled multipart contents inside the configured media root. A remote attacker can cause a developer's browser to submit this state-changing request by inducing the developer to visit an attacker-controlled page while tinacms dev is running. This issue is fixed in version 2.5.2. |
| In Splunk On-Call (VictorOps) app versions below 1.0.43 on Splunkbase, a user who does not hold the "admin" or "power" Splunk roles could read a partially masked Application Programming Interface (API) key from the App Key Value Store (KV Store). The exposure is possible because the Splunk On-Call (VictorOps) app does not fully mask the API key before storing it in a KV Store collection that the user can read. For more information see About the app key value store (https://help.splunk.com/en/data-management/splunk-enterprise-admin-manual/9.2/administer-the-app-key-value-store/about-the-app-key-value-store) in the Splunk documentation. |
| In Splunk MCP Server app versions below 1.2.1, a user who holds the "admin" Splunk role could execute arbitrary commands on the underlying operating system. The vulnerability is possible because of missing input validation in the app's credential management component, which deserializes stored data without checking whether the content is of the expected type. |
| In Splunk Connect for Kafka versions below 2.2.7, an unauthenticated user positioned in the network path could read or alter all relevant data sent from the connector when Kerberos authentication is used with Hypertext Transfer Protocol (HTTP) Event Collector in Splunk Enterprise. The vulnerability is possible because the Kerberos authentication path does not apply the configured certificate validation options when it builds the HTTP client. For more information see Install Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/install/install-splunk-connect-for-kafka), Security configurations for Splunk Connect for Kafka (https://help.splunk.com/en/splunk-enterprise/get-data-in/splunk-connect-for-kafka/2.2/configure/security-configurations-for-splunk-connect-for-kafka), and Set up and use HTTP Event Collector with configuration files (https://help.splunk.com/en/splunk-enterprise/get-data-in/get-started-with-getting-data-in/9.4/get-data-with-http-event-collector/set-up-and-use-http-event-collector-with-configuration-files) in the Splunk documentation. |
| In Splunk Connect for Kafka versions below 2.2.7, an unauthenticated user who can reach the Kafka Connect Representational State Transfer (REST) API could configure a non-secure Hypertext Transfer Protocol (HTTP) Event Collector endpoint in Splunk Enterprise that causes the connector to send authentication credentials to an attacker-controlled server, allowing for exposure of credentials that compromise all relevant data sent through the connector and limited alteration of event delivery. The vulnerability is possible because HTTP Event Collector endpoint validation does not require secure transport by default. For more information see Install Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/install/install-splunk-connect-for-kafka), Data ingestion parameters for Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/overview/data-ingestion-parameters-for-splunk-connect-for-kafka), and Set up and use HTTP Event Collector with configuration files (https://help.splunk.com/en/splunk-enterprise/get-data-in/get-started-with-getting-data-in/9.4/get-data-with-http-event-collector/set-up-and-use-http-event-collector-with-configuration-files) in the Splunk documentation. |
| In Splunk Connect for Kafka versions below 2.2.7, an unauthenticated user who can reach the Kafka Connect Representational State Transfer (REST) API could configure timestamp extraction with a crafted regular expression and matching event data to block a Kafka Connect worker thread, stopping event delivery for the affected connector. The vulnerability is possible because timestamp extraction evaluates customer-supplied regular expressions without a time limit. For more information see Install Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/install/install-splunk-connect-for-kafka) and Data ingestion parameters for Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/overview/data-ingestion-parameters-for-splunk-connect-for-kafka) in the Splunk documentation. |
| In Splunk Connect for Kafka versions below 2.2.7, an unauthenticated user who can reach the Kafka Connect Representational State Transfer (REST) API and influence responses from a Hypertext Transfer Protocol (HTTP) Event Collector endpoint in Splunk Enterprise could cause the connector to retry failed event batches until event delivery stops. The vulnerability is possible because HTTP Event Collector delivery retry handling uses an unbounded default for failed batches instead of a finite retry limit. For more information see Install Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/install/install-splunk-connect-for-kafka), Data ingestion parameters for Splunk Connect for Kafka (https://help.splunk.com/en/data-management/integrate-data-with-add-ons/splunk-connect-for-kafka/2.2/overview/data-ingestion-parameters-for-splunk-connect-for-kafka), and Set up and use HTTP Event Collector with configuration files (https://help.splunk.com/en/splunk-enterprise/get-data-in/get-started-with-getting-data-in/9.4/get-data-with-http-event-collector/set-up-and-use-http-event-collector-with-configuration-files) in the Splunk documentation. |
| In Cisco Talos Intelligence for Enterprise Security Cloud versions below 1.0.3, an unauthenticated user could access the add-on OpenAPI specification through Splunk Web static file paths. The exposed specification could allow for reconnaissance of the add-on Representational State Transfer (REST) API endpoints and authentication model. The vulnerability is possible because the generated OpenAPI specification is packaged in a static file path that Splunk Web serves without authentication. For more information see Deploy Cisco Talos Intelligence for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.0/introduction/deploy-cisco-talos-intelligence-for-splunk-enterprise-security-cloud-only) in the Splunk documentation. |
| In Cisco Talos Intelligence for Enterprise Security Cloud versions below 1.0.3, a user that holds a role with the get_talos_enrichment capability could send a crafted request to the Talos intelligence enrichment Representational State Transfer (REST) API endpoint and cause the instance to make an outbound request to an attacker-controlled server. The request could expose tokens that compromise all relevant data and system integrity in the Splunk instance. The vulnerability is possible because the Talos intelligence enrichment REST endpoint accepts the destination for authenticated Splunk management requests from request data. For more information see Deploy Cisco Talos Intelligence for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.0/introduction/deploy-cisco-talos-intelligence-for-splunk-enterprise-security-cloud-only) in the Splunk documentation. |
| In Splunk Enterprise Security versions below 8.6.1, a user who holds the ess_analyst Splunk Enterprise Security role could change User and Entity Behavior Analytics (UEBA) search macros that scheduled searches run with administrator permissions, allowing for access to all relevant data and system integrity through those searches. The vulnerability is possible because the UEBA app metadata grants analyst roles write access to search macros that should be writable only by administrator roles. For more information see Users and roles for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/install/8.4/installation/users-and-roles-for-splunk-enterprise-security) and Roles and knowledge objects in UEBA for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/administer/8.5/user-and-entity-behavior-analytics/roles-and-knowledge-objects-in-ueba-for-splunk-enterprise-security) in the Splunk documentation. |
| In Splunk Enterprise Security versions below 8.6.1, a user who holds a Splunk Enterprise Security role that contains the mc_investigation_read capability could inject Search Processing Language (SPL) through Analyst Queue search filters, allowing for access to all relevant data and system integrity available to the scheduled searches that run for that user. The vulnerability is possible because the Analyst Queue search filter handling does not validate filter field names before the fields are included in SPL searches. For more information see Users and roles for Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/install/8.4/installation/users-and-roles-for-splunk-enterprise-security), Manage analyst workflows using the analyst queue in Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/administer/8.4/mission-control/manage-analyst-workflows-using-the-analyst-queue-in-splunk-enterprise-security), and Overview of Mission Control in Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.5/mission-control/overview-of-mission-control-in-splunk-enterprise-security) in the Splunk documentation. |
| In versions below 3.2.2 of the Zoom app for Splunk SOAR, a user who holds a role with permission to run actions could expose meeting and personal meeting ID passwords by invoking one of the create meeting, update meeting, or update user settings actions, because the affected password and pmi_password parameters are not masked and are shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameters as passwords. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 2.1.4 of the Venafi app for Splunk SOAR, a user who holds a role with permission to run actions could expose keystore and private-key passwords by invoking the get certificate action, because the action's keystore_password and password parameters are not masked and are shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameters as passwords. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 2.2.1 of the Splunk Attack Analyzer Connector for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive archive password by invoking either the detonate file or detonate url action, because the action's archive_password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 1.0.5 of the RSA SecurID Authentication Manager app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive token serial by invoking either the enable token or revoke token action, because the action's token_serial parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 3.8.5 of the Phantom app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive archive password by invoking the deflate item action, because the action's password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 1.5.2 of the MS Graph for Active Directory app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive password by invoking the reset password action, because the action's temp_password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
| In versions below 5.1.3 of the CrowdStrike OAuth API app for Splunk SOAR, a user who holds a role with permission to run actions could expose a sensitive document password by invoking either the detonate file or detonate url action, because the action's document_password parameter is not masked and is shown in cleartext in the user interface. The information disclosure is possible because the app does not mark the affected action parameter as a password. For more information see Run an action in Splunk SOAR (https://help.splunk.com/en/splunk-soar/soar-on-premises/use-splunk-soar-on-premises/8.6.0/use-the-command-line-interface-to-perform-tasks-in-splunk-soar-on-premises/run-an-action-in-splunk-soar-on-premises). |
