Export limit exceeded: 29990 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (2317 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53101 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix potential deadlock in mt7921_roc_abort_sync roc_abort_sync() can deadlock with roc_work(). roc_work() holds dev->mt76.mutex, while cancel_work_sync() waits for roc_work() to finish. If the caller already owns the same mutex, both sides block and no progress is possible. This deadlock can occur during station removal when mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() -> mt7921_roc_abort_sync() invokes cancel_work_sync() while roc_work() is still running and holding dev->mt76.mutex. This avoids the mutex deadlock and preserves exactly-once work ownership. | ||||
| CVE-2026-46252 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix locking in regulator_resolve_supply() error path If late enabling of a supply regulator fails in regulator_resolve_supply(), the code currently triggers a lockdep warning: WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596 ... Call trace: _regulator_put+0x80/0xa0 (P) regulator_resolve_supply+0x7cc/0xbe0 regulator_register_resolve_supply+0x28/0xb8 as the regulator_list_mutex must be held when calling _regulator_put(). To solve this, simply switch to using regulator_put(). While at it, we should also make sure that no concurrent access happens to our rdev while we clear out the supply pointer. Add appropriate locking to ensure that. While the code in question will be removed altogether in a follow-up commit, I believe it is still beneficial to have this corrected before removal for future reference. | ||||
| CVE-2026-43010 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject sleepable kprobe_multi programs at attach time kprobe.multi programs run in atomic/RCU context and cannot sleep. However, bpf_kprobe_multi_link_attach() did not validate whether the program being attached had the sleepable flag set, allowing sleepable helpers such as bpf_copy_from_user() to be invoked from a non-sleepable context. This causes a "sleeping function called from invalid context" splat: BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 0 Fix this by rejecting sleepable programs early in bpf_kprobe_multi_link_attach(), before any further processing. | ||||
| CVE-2025-49178 | 1 Redhat | 7 Enterprise Linux, Rhel Aus, Rhel E4s and 4 more | 2026-06-30 | 5.5 Medium |
| A flaw was found in the X server's request handling. Non-zero 'bytes to ignore' in a client's request can cause the server to skip processing another client's request, potentially leading to a denial of service. | ||||
| CVE-2026-57231 | 2 Podman-container-tools, Podman Project | 2 Podman, Podman | 2026-06-29 | 7.5 High |
| Podman is a tool for managing OCI containers and pods. From 1.8.1 until 5.8.4, a container image that contains a environment variable with just a key and no value can trick podman into passing that variable from the host into the container. This is made worse by the fact that using an asterisk (*) will cause podman to pass all host variables into the container. So essentially a malicious image can exfiltrate all podman environment variables that are set in the session from where the container is launched. This vulnerability is fixed in 5.8.4 and 6.0.0. | ||||
| CVE-2026-53304 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Resolve soft lockup issue when opening /dev/sgX The parameter def_reserved_size defines the default buffer size reserved for each Sg_fd and should be restricted to a range between 0 and 1,048,576 (see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the function sg_proc_write_dressz enforces this limit, it is possible to bypass it by directly modifying the module parameter as shown below, which then causes a soft lockup: echo -1 > /sys/module/sg/parameters/def_reserved_size exec 4<> /dev/sg0 watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537] Modules loaded: CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134, PREEMPT disabled Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version 1.16.1-2.fc37 dated 04/01/2014 ... Call Trace: sg_build_reserve+0x5c/0xa0 sg_add_sfp+0x168/0x270 sg_open+0x16e/0x340 chrdev_open+0xbe/0x230 do_dentry_open+0x175/0x480 vfs_open+0x34/0xf0 do_open+0x265/0x3d0 path_openat+0x110/0x290 do_filp_open+0xc3/0x170 do_sys_openat2+0x71/0xe0 __x64_sys_openat+0x6d/0xa0 do_syscall_64+0x62/0x310 entry_SYSCALL_64_after_hwframe+0x76/0x7e The fix is to use module_param_cb to validate and reject invalid values assigned to def_reserved_size. | ||||
| CVE-2026-53323 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: remove redundant netdev_lock_ops() from conduit ethtool ops DSA replaces the conduit (master) device's ethtool_ops with its own wrappers that aggregate stats from both the conduit and DSA switch ports. Taking the lock again inside the DSA wrappers causes a deadlock. Stumbled upon this when booting qemu with fbnic and CONFIG_NET_DSA_LOOP=y (which looks like some kind of testing device that auto-populates the ports of eth0). `ethtool -i` is enough to deadlock. This means we have basically zero coverage for DSA stuff with real ops locked devs. Remove the redundant netdev_lock_ops()/netdev_unlock_ops() calls from the DSA conduit ethtool wrappers. | ||||
| CVE-2026-53285 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED [Why] dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(), which disables local softirqs. The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path, which calls BUG_ON(in_interrupt()) because it's invoked within the FPU-enabled (softirq disabled) region, leading to a kernel crash. [How] Wrap the dc_state_create_phantom_plane() call with the DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during this memory allocation. (cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) | ||||
| CVE-2026-13489 | 1 78 | 1 Xiaozhi-esp32 | 2026-06-29 | 3.1 Low |
| A weakness has been identified in 78 xiaozhi-esp32 up to 2.2.6. Affected by this issue is the function ParseMessage of the file main/mcp_server.cc of the component MCP Response Handler. This manipulation causes improper synchronization. Remote exploitation of the attack is possible. The attack's complexity is rated as high. The exploitation is known to be difficult. The exploit has been made available to the public and could be used for attacks. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-52946 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in send_sigio() and send_sigurg() when a process group receives a signal. When FASYNC is configured for a process group (PIDTYPE_PGID), both functions use read_lock(&tasklist_lock) to traverse the task list. However, they are frequently called from softirq context: - send_sigio() via input_inject_event -> kill_fasync - send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ) The deadlock is caused by the rwlock writer fairness mechanism: 1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait(). 2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in fork() or exit() and spins, which blocks all new readers. 3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception). 4. The softirq calls send_sigurg() and attempts to acquire read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting. Since PID hashing and do_each_pid_task() traversals are already RCU-protected, the read_lock on tasklist_lock is no longer strictly required for safe traversal. Fix this by replacing tasklist_lock with rcu_read_lock(), aligning the process group signaling path with the single-PID path. This also mitigates a potential remote denial of service vector via TCP URG packets. Lockdep splat: ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [...] Chain exists of: &dev->event_lock --> &f_owner->lock --> tasklist_lock Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(tasklist_lock); local_irq_disable(); lock(&dev->event_lock); lock(&f_owner->lock); <Interrupt> lock(&dev->event_lock); *** DEADLOCK *** | ||||
| CVE-2026-53201 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "drm/xe: Skip exec queue schedule toggle if queue is idle during suspend" This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6. The idle-skip optimization bypasses GuC suspend, so the GPU may not perform the context switch that flushes TLB entries for invalidated userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB invalidation and page faults during userptr invalidation tests. Restore unconditional schedule toggling on suspend so the context-switch TLB flush is always performed. This optimization will be reintroduced with a fix that does not skip suspend in LR/preempt-fence VM mode. (cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170) | ||||
| CVE-2026-53277 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation walk_s1() and kvm_walk_nested_s2() expect to be called while holding kvm->srcu to guard against memslot changes. While this is generally the case, __kvm_at_s12() and __kvm_find_s1_desc_level() call into the respective walkers without taking kvm->srcu. Fix by acquiring kvm->srcu prior to the table walk in both instances. | ||||
| CVE-2026-53180 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: timers/migration: Fix livelock in tmigr_handle_remote_up() tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu == smp_processor_id(), assuming the local softirq path already handled this CPU's timers. This assumption is wrong because jiffies can advance after the handling of the CPU's global timers in run_timer_base(BASE_GLOBAL) and before tmigr_handle_remote() evaluates the expiry times. As a consequence a timer which expires after the CPU local timer wheel advanced and becomes expired in the remote handling is ignored and the callback is never invoked and removed from the timer wheel. What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it as expired, and the event is re-queued with expires == now on each iteration. The goto-again loop spins indefinitely. Fix this by calling timer_expire_remote() unconditionally. That's minimal overhead for the common case as __run_timer_base() returns immediately if there is nothing to expire in the local wheel. [ tglx: Amend change log and add a comment ] | ||||
| CVE-2026-53072 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm() assumes it is held, and if conn is deleted concurrently -> UAF. Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen, and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred listening socket code paths, hci_connect_cfm(conn) is called with hdev->lock held. Fix by holding the lock. | ||||
| CVE-2026-53071 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file acquires the lock first. A remote BLE device can send a crafted L2CAP ECRED reconfiguration response to corrupt the channel list while another thread is iterating it. Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(), and l2cap_chan_unlock() and l2cap_chan_put() after, matching the pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del(). | ||||
| CVE-2026-53062 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm cache policy smq: fix missing locks in invalidating cache blocks In passthrough mode, the policy invalidate_mapping operation is called simultaneously from multiple workers, thus it should be protected by a lock. Otherwise, we might end up with data races on the allocated blocks counter, or even use-after-free issues with internal data structures when doing concurrent writes. Note that the existing FIXME in smq_invalidate_mapping() doesn't affect passthrough mode since migration tasks don't exist there, but would need attention if supporting fast device shrinking via suspend/resume without target reloading. Reproduce steps: 1. Create a cache device consisting of 1024 cache entries dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. Populate the cache, and record the number of cached blocks fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \ --size=64m --direct=1 nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}') 3. Reload the cache into passthrough mode dmsetup suspend cache dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" dmsetup resume cache 4. Write to the passthrough cache. By setting multiple jobs with I/O size equal to the cache block size, cache blocks are invalidated concurrently from different workers. fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \ --direct=1 --numjobs=2 --randrepeat=0 --size=64m 5. Check if demoted matches cached block count. These numbers should match but may differ due to the data race. nr_demoted=$(dmsetup status cache | awk '{print $12}') echo "$nr_cached, $nr_demoted" | ||||
| CVE-2026-53054 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix VM_BIND UNMAP locking Wrong argument meant that the objs involved in UNMAP ops were not always getting locked. Since _NO_SHARE objs share a common resv with the VM (which is always locked) this would only show up with non-_NO_SHARE BOs. Patchwork: https://patchwork.freedesktop.org/patch/713898/ | ||||
| CVE-2026-53049 | 1 Linux | 1 Linux Kernel | 2026-06-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: add some missing log locking Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(), gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock, but these functions require exclusion against concurrent transactions. To fix that, add a non-locking __gfs2_log_flush() function. Then, in gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log flushing functions and __gfs2_log_flush(). | ||||
| CVE-2026-53293 | 1 Linux | 1 Linux Kernel | 2026-06-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix AMDGPU_INFO_READ_MMR_REG There were multiple issues in that code. First of all the order between the reset semaphore and the mm_lock was wrong (e.g. copy_to_user) was called while holding the lock. Then we allocated memory while holding the reset semaphore which is also a pretty big bug and can deadlock. Then we used down_read_trylock() instead of waiting for the reset to finish. (cherry picked from commit 361b6e6b303d4b691f6c5974d3eaab67ca6dd90e) | ||||
| CVE-2026-52979 | 1 Linux | 1 Linux Kernel | 2026-06-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: psp: check for device unregister when creating assoc psp_assoc_device_get_locked() obtains a psp_dev reference via psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU); it then acquires psd->lock and drops the reference. Before the lock is taken, psp_dev_unregister() can run to completion: take psd->lock, clear out state, unlock, drop the registration reference. The expectation is that the lock prevents device unregistration, but much like with netdevs special care has to be taken when "upgrading" a reference to a locked device. Add the missing check if device is still alive. psp_dev_is_registered() exists already but had no callers, which makes me wonder if I either forgot to add this or lost the check during refactoring... | ||||