| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/alternatives: Exclude text poking against change_page_attr()
From time to time, the following BUG can be observed
in the x86 alternatives patching code [0]:
> kernel BUG at arch/x86/kernel/alternative.c:2576!
> Oops: invalid opcode: 0000 [#1] SMP NOPTI
> CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
> RIP: 0010:__text_poke+0x2aa/0x450
> Call Trace:
> <TASK>
> smp_text_poke_batch_finish+0x2a7/0x320
> __static_call_transform+0xb7/0x220
> arch_static_call_transform+0x5b/0xb0
> __static_call_init+0xe9/0x270
> static_call_module_notify+0x11f/0x150
> notifier_call_chain+0x61/0xe0
> blocking_notifier_call_chain_robust+0x63/0xc0
> load_module+0x1c92/0x20c0
> init_module_from_file+0xd8/0x140
> idempotent_init_module+0x100/0x2f0
> __x64_sys_finit_module+0x71/0xe0
> do_syscall_64+0xe1/0x610
> entry_SYSCALL_64_after_hwframe+0x76/0x7e
which matches the following BUG_ON() in alternative.c:
/*
* If something went wrong, crash and burn since recovery paths are not
* implemented.
*/
BUG_ON(!pages[0] || (cross_page_boundary && !pages[1]));
This can happen if vmalloc_to_page() fails, for any reason. Such can happen
if text poking races with CPA, which can possibly result in the collapsing
of page tables (or breaking of PMD hugepages). It is not a problem for most
users of vmalloc_to_page() (they solely own the vmalloc'd range) but, when
CONFIG_ARCH_HAS_EXECMEM_ROX=y, various modules own a single execmem vmalloc
range, and can call set_memory_*() in parallel on it. This can happen to
race against __text_poke and cause havoc in vmalloc_to_page().
Fix it by excluding against CPA using the init_mm mmap read lock.
[ dhansen: Fix up SoB ordering. The actual code flow here was:
Pedro=>Lorenzo=>Mike=>Me which is reflected in the SoB chain
now. I *believe* Mike simply picked up Lorenzo's update to
Pedro's post from the Link ] |
| In the Linux kernel, the following vulnerability has been resolved:
x86/cfi: Fix FineIBT hash offset in cfi_get_func_hash()
The switch of the FineIBT preamble from "subl $hash, %r10d" to the
shorter "subl $hash, %eax" moved the hash immediate from offset 7 to
offset 5 of the preamble. fineibt_preamble_hash was updated to match,
but the open-coded offset in cfi_get_func_hash() was missed and it
still reads the hash at offset 7.
cfi_get_func_hash() is used by the BPF JIT to give a struct_ops
trampoline the CFI hash of the stub function it stands in for. With
FineIBT the trampoline now gets the upper half of the real hash
followed by the first two bytes of the next instruction, so the first
indirect call from the kernel into a struct_ops program,
tcp_init_congestion_control() calling ->init() of a BPF congestion
control for example, fails the FineIBT check and the kernel dies with
a CFI failure.
Move the FineIBT preamble template and its offset defines above
cfi_get_func_hash() and use fineibt_preamble_hash there, so every
reader of the preamble shares one definition of its layout. The
CFI_FINEIBT arm is only built with CONFIG_FINEIBT, the only
configuration in which cfi_mode can take that value.
cfi_get_func_arity() does not need the same treatment: the __bhi_args
call whose displacement it reads still ends at the function address. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/drm_exec: fix up contended obj when num_objects is 0
drm_exec_prepare_array() silently returns success without calling
drm_exec_lock_contended() when num_objects is zero. This breaks the
invariant upheld by drm_exec_lock_obj(), where every entry point into
the locking sequence must first attempt to lock any previously
contended object before proceeding.
Drivers that chain multiple drm_exec_prepare_array() calls per
drm_exec_until_all_locked() iteration (e.g. amdgpu's userq signal/wait
ioctls, which prepare separate read and write BO arrays) can pass an
empty array for one of the two calls. If contention is hit while
preparing the non-empty array, exec->contended is set and the loop
retries; on retry, the empty-array call preceding it is a no-op that
never clears exec->contended, so drm_exec_retry_on_contention()
immediately jumps back to the top of the loop without ever reaching
the call that would resolve the contention. This spins forever.
Fix it by having drm_exec_prepare_array() call drm_exec_lock_contended()
directly when num_objects is zero, so a pending contended object dont
loop infinitely. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: hold a reference to thread_pid across proc_flush_pid
Commit 0a36bad01731 ("release_task: kill the no longer needed
get/put_pid(thread_pid)") removed the reference around proc_flush_pid().
It assumed that free_pids(post.pids) at the end of release_task() would
keep thread_pid alive until then.
That assumption is wrong. __change_pid() only records a detached PID in
post.pids when pid_has_task() is false for every PIDTYPE. If another task
still uses the exiting task's PID as its process group or session ID,
__unhash_process() removes the exiting task's PIDTYPE_PID link but leaves
the PID out of post.pids. release_task() therefore holds no reference to
it after dropping tasklist_lock.
The other task can then remove the remaining PIDTYPE links. Its
free_pids() call schedules delayed_put_pid(), and the RCU callback can free
the PID before the first release_task() reaches proc_flush_pid().
An unprivileged reproducer races wait4(-1) against setsid() to trigger this
ordering. Three of three fresh v7.2 KASAN boots reported:
BUG: KASAN: slab-use-after-free in
proc_invalidate_siblings_dcache+0x3e2/0x3f0
Read of size 8 by task h7_pid_reaper/1921
Call Trace:
proc_invalidate_siblings_dcache
release_task
wait_consider_task
__do_wait
do_wait
kernel_wait4
Freed by task 0:
kmem_cache_free
put_pid
delayed_put_pid
rcu_core
Last potentially related work creation:
__call_rcu_common
free_pids
ksys_setsid
KASAN identified a 144-byte object from the pid cache and located the bad
read 80 bytes into the freed object, matching pid->inodes. With an
explicit reference, three of three fresh boots completed without a KASAN
report. The concurrent RCU callback dropped its reference while
proc_flush_pid() was protected, and the balancing put_pid() performed the
final free afterward.
Take a reference before __unhash_process() clears p->thread_pid and release
it after proc_flush_pid() completes.
A tested source reproducer is available privately on request. No
controlled read or write, information leak, or privilege escalation is
claimed. The mainline patch applies directly to v6.19.y and newer;
v6.16.y through v6.18.y need a context-adjusted backport. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev
The command and ACL RPMsg endpoints store struct btqcomsmd as their
callback private data. The receive callbacks dereference btq->hdev
without taking an hci_dev reference.
The current teardown order frees the hci_dev before destroying the RPMsg
endpoints in both the hci_register_dev() error path and the driver remove
path. If WCNSS delivers data in that window, the endpoint callback can
run with an already freed hci_dev and pass it to the Bluetooth core.
For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears
the callback under the channel recv_lock. The receive path holds the same
lock while invoking the callback, so destroying the endpoints first both
prevents new callbacks and serializes with any callback already running.
Destroy the command and ACL endpoints before hci_free_dev(). Keep
hci_unregister_dev() first during remove so the HCI core stops issuing
operations before the transport endpoints are shut down. In the full
registration-error cleanup path, return directly after freeing the hci_dev
to avoid falling through to the partial-construction labels and destroying
the endpoints twice. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sprd: validate compress buffer sizes against fixed allocations
sprd_platform_compr_open() allocates the stage 0 IRAM buffer (32K data
area) and the stage 1 DDR buffer (2M data area) with fixed sizes, but
sprd_platform_compr_copy() derives all copy lengths from the user
controlled runtime->fragment_size and the write() count, never
comparing them against the physical buffer sizes. The compress core
only checks fragment_size * fragments for an u32 overflow in
snd_compress_check_input(), so a local user can configure a logical
buffer of up to ~4GB via SNDRV_COMPRESS_SET_PARAMS, far exceeding the
fixed allocations.
A fragment_size larger than the 32K IRAM data area makes the stage 0
copy_from_user() overflow past the IRAM allocation, and a buffer_size
larger than the 2M DDR buffer makes the wrapping copy at the end of
sprd_platform_compr_copy() write fully user controlled data past the
buffer. No SNDRV_PCM_TRIGGER_START is needed, a write() in SETUP
state reaches the copy callback directly.
Reject parameters that do not fit into the fixed buffers in
set_params(), and fix the advertised max fragment size: 128K never
fitted into the 32K IRAM buffer. The caps values may have been carried over
from the qdsp6 driver, which allocates its buffers according to the
advertised maxima, unlike this driver. With 32K as max fragment size
the advertised limits are self-consistent: 32K * 64 = 2M equals the
DDR buffer size.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Ensure cmd stream ends with a stop op
While the QSIZE register setting should prevent an out of bounds access
of the command stream, it is not clear whether the h/w generates an
interrupt in this case as is required (to prevent a timeout). As a stop op
is expected end of the command stream, let's just ensure it is present. A
stop op in the middle of the command stream also makes no sense. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr
Add a size parameter to ivpu_to_cpu_addr() and validate that the
whole [vpu_addr, vpu_addr + size) range stays within the BO. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: skip the VMID 0 flush for VRAM
Clear-on-release only runs on VRAM, which amdgpu_ttm_map_buffer() reaches
via its direct MC address without programming a GART window, yet the wipe
still forces a VMID 0 flush. On GFX11 (e.g. Navi33) that spurious SDMA
flush can wedge the engine; only flush when a GART window is actually used.
v2: Let amdgpu_ttm_map_buffer() return whether the VMID 0 flush is needed,
and drive the clear and copy paths from that. (Christian)
v3: Make the vm_needs_flush output parameter mandatory instead of
allowing NULL. (Christian)
(cherry picked from commit a306e406e570b74318ff7d80e5b07b540ca1d3a9) |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix user-space data loss with MADV_FREE and THP
Some of users of Polars (a data analytics library) have lost production
data from this bug. They seem to have just the right combination of
huge pages, MADV_FREE and heavy reclaim pressure.
pmd_modify() masks the old value with (_HPAGE_CHG_MASK & ~_PAGE_DIRTY),
silently discarding the hardware dirty bit. The subsequent
pmd_mksaveddirty() call is supposed to transfer _PAGE_DIRTY into
_PAGE_SAVED_DIRTY when write-protecting, but the dirty bit was already
stripped from the value, so there is nothing left to transfer.
Contrast with pte_modify(), which keeps _PAGE_DIRTY_BITS in its mask,
and pud_modify(), which keeps _HPAGE_CHG_MASK untouched: pmd_modify()
is the odd one out. Any pmd_modify() on a writable, dirty PMD loses
the dirty state.
One visible consequence is data loss with MADV_FREE on PMD-mapped THP:
memset(buf, 0x5A, size); // PMD-mapped THP, PMD dirty
madvise(buf, size, MADV_FREE); // PMD cleaned but left writable,
// folio marked lazyfree
memset(buf, 0x5A, size); // hardware sets _PAGE_DIRTY again
mprotect(buf, size, PROT_READ); // pmd_modify() drops the dirty bit
mprotect(buf, size, PROT_READ|PROT_WRITE);
// ... memory pressure ...
Reclaim (e.g. under memcg pressure) then finds the lazyfree folio with
no dirty bit set anywhere and frees it in
__discard_anon_folio_pmd_locked(), even though the data was rewritten
after MADV_FREE; subsequent reads fault in fresh zero pages. NUMA
hinting alone can trigger the same loss, as do_huge_pmd_numa_page()
restores the PMD through pmd_modify() as well.
PMD-mapped file THPs are affected too: mprotect()/NUMA hinting dropping
the dirty bit means rewritten data is never written back.
Fix it by keeping _PAGE_DIRTY in the preserved mask, exactly like
pte_modify() and pud_modify() do. The existing
pmd_mksaveddirty()/pmd_clear_saveddirty() pair then performs the
hardware-dirty <-> saved-dirty transition based on the write bit,
preserving the shadow-stack encoding rules. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: unhash the dentry before dropping the item in rmdir
configfs_get_config_item() treats a hashed dentry as proof that
sd->s_element is a live config_item. configfs_rmdir() breaks that:
simple_rmdir() leaves the dentry hashed, the last reference to the item is
dropped right after, and the dentry is only unhashed by d_delete() once
->rmdir() has returned. configfs_symlink() resolves its target holding no
lock on it, so get_target() can land in that window:
BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90
get_target fs/configfs/symlink.c:128 [inline]
configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185
Unhash in configfs_remove_dir(), while the item is still guaranteed to be
there. A reference obtained just before that stays harmless, as
create_link() rechecks CONFIGFS_USET_DROPPING, already set by
configfs_detach_prep(). Both configfs_unregister_subsystem() paths
d_drop() after detaching, so this only makes rmdir match them. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: pin the symlink target's dirent instead of chasing ->ci_dentry
create_link() reads the target's configfs_dirent from
item->ci_dentry->d_fsdata, relying on the item reference taken by
get_target(). That reference pins the item, not its dentry: the dentry is
pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via
simple_rmdir() while the item is still alive. A symlink racing with rmdir
of its target can therefore find ->ci_dentry freed and its dirent
released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get().
Take the dirent in get_target() as well, under ->d_lock and atomically
with the item reference, and pass it down to create_link(). A hashed
dentry has not been killed yet, so its ->d_fsdata reference keeps the
dirent alive there. |
| In the Linux kernel, the following vulnerability has been resolved:
sunvdc: unmap LDC cookies when the descriptor send fails
__send_request() maps the request's pages into the LDC channel's map
table (ldc_map_sg()), fills in the descriptor and marks it
VIO_DESC_READY before ringing the doorbell via __vdc_tx_trigger().
When the trigger fails, the error path only prints a message: the
descriptor stays READY and the cookies are never unmapped. The
mapping is normally released in vdc_end_one() when the peer completes
the descriptor - but a descriptor whose doorbell was never sent will
never complete, and since dr->prod is not advanced on failure, the
reset path (vdc_requeue_inflight(), which walks [cons, prod)) never
visits it either. The map table entries are leaked permanently.
Since commit a11f6ca9aef9 ("sunvdc: Do not spin in an infinite loop
when vio_ldc_send() returns EAGAIN") trigger failures occur in
practice under load, so every resulting I/O error also leaks one
request's worth of entries from the fixed-size (8192 entries per
channel) map table. Because the allocator hands out contiguous
ranges, fragmentation makes large multi-segment requests fail first
as the table drains, until ldc_map_sg() fails permanently and the
disk is dead until reboot.
It also makes any retry-based recovery unusable: requeuing the
request on -EAGAIN remaps the pages on every attempt, overwriting
desc->cookies and orphaning the previous mapping, so the table
drains at the retry rate. This is the memory exhaustion observed
when the requeue approach was first tested in October 2025.
Roll back on failure: unmap the cookies, mark the descriptor FREE
again and clear the request entry. If the trigger failed with
-ENOTCONN, __vdc_tx_trigger() has already reset the port, which
tears down and reallocates both the dring and the LDC channel
including its map table - nothing to roll back, and the stale
descriptor must not be touched. |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. |
| Insertion of sensitive information into externally-accessible file or directory in Windows Storage allows an authorized attacker to disclose information locally. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
