| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gpio-fan) Fix use-after-free in alarm work
fan_alarm_irq_handler() queues fan_data->alarm_work, but nothing
cancels it. fan_alarm_notify() dereferences fan_data and its hwmon
device. On unbind, devres frees the interrupt, which only waits for
the handler itself, and then releases the hwmon device and fan_data,
so a pending fan_alarm_notify() can run after those frees.
Replace INIT_WORK() with devm_work_autocancel(), registered before
devm_request_irq(). The devres cleanup then frees the interrupt
first, so no new work can be queued, and cancels the work while
fan_data and the hwmon device are still alive.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Clear stale peer app data after address list changes
afs_fs_probe_fileserver() fetches the current endpoint state under
server->fs_lock, but leaves old_alist as NULL. Consequently,
afs_set_peer_appdata() treats every address list replacement as initial
setup and only binds the new peers; it never unbinds peers removed from
the old list.
An address refresh can therefore proceed as follows. CPU 0 replaces
server S's list and drops Pold without clearing Pold->app_data. The
server destroyer then clears only S's current peers and lets S reach its
RCU callback. After the callback frees S, CPU 1 handles a callback
through an RxRPC connection that still pins Pold, reads Pold->app_data,
and calls afs_use_server() on the freed object.
KASAN reported:
BUG: KASAN: slab-use-after-free in afs_find_server+0x3c/0xa0
Read of size 4 at addr ffff8881013e1af0 by task krxrpcio/7001/74
Call Trace:
afs_find_server+0x3c/0xa0
afs_rx_new_call+0x15c/0x390
rxrpc_new_incoming_call+0x97c/0x1730
rxrpc_input_packet.constprop.0+0xd03/0xec0
rxrpc_io_thread+0x967/0x1640
Allocated by task 93:
afs_lookup_server+0x1a7/0x14c0
afs_alloc_server_list+0x43f/0xb60
afs_create_volume+0x923/0x1490
afs_get_tree+0x1c6/0x10a0
Freed by task 0:
kfree+0x131/0x3c0
rcu_core+0x50a/0x1850
Last potentially related work creation:
__call_rcu_common.constprop.0+0x71/0xa10
afs_put_server+0x213/0x2b0
Preserve old->addresses for the peer app-data update so that removed
peers are cleared before the endpoint state is replaced. Also advance
both cursors when the old and new lists share a peer; activating the
old/new comparison without this would otherwise loop forever on the
shared entry. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: invalidate queues before flushing them
fqdir_pre_exit() flushes the skbs from incomplete queues without
changing their completion state. A fragment which found a queue before
high_thresh was cleared can then acquire the queue lock and reuse stale
reassembly metadata. A queue concurrently killed after fqdir->dead is
set can instead become INET_FRAG_COMPLETE|INET_FRAG_HASH_DEAD while
still holding its old skbs; skipping it because it is complete leaves
those references behind until asynchronous fqdir teardown.
For IPv6, stale metadata can make ip6_frag_reasm() use the old
nhoffset with a new skb and access memory out of bounds. The resulting
heap corruption can be leveraged for local privilege escalation when
unprivileged network namespaces are available. Unflushed fragments can
also keep conntrack references alive after the conntrack per-net
cleanup point.
Kill each incomplete queue, then flush every queue still owned by the
dying rhashtable. HASH_DEAD identifies that ownership, while complete
queues without it are already owned by another destroy path and must be
left alone. Releasing a timer reference removed by inet_frag_kill() is
deferred to inet_frag_putn(), after the queue lock is dropped.
KASAN report:
BUG: KASAN: slab-out-of-bounds in ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
Write of size 1 at addr ff110001039c6e00 by task poc/771
Call Trace:
? ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479 (discriminator 5))
ip6_input_finish (net/ipv6/ip6_input.c:534)
ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3))
packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
The buggy address belongs to the object at ff110001039c6b40
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 0 bytes to the right of
allocated 704-byte region [ff110001039c6b40, ff110001039c6e00)
BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
Read of size 1 at addr ff110001039c6e08 by task poc/771
Call Trace:
? ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
ip6_input_finish (net/ipv6/ip6_input.c:534)
ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3))
packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
packet_sendmsg (net/packet/af_packet.c:2959 net/packet/af_packet.c:3053 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
The buggy address belongs to the object at ff110001039c6b40
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 8 bytes to the right of
allocated 704-byte region [ff110001039c6b40, ff110001039c6e00) |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mv88e6xxx: bound the policy rule dump by the caller's buffer size
mv88e6xxx_get_rxnfc() uses rxnfc->rule_cnt as the write index while
dumping the policy IDR, clobbering the input value before it has been
looked at. That input is the number of entries the caller had room for.
ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the
buffer from the rule_cnt userspace passes in, so once an admin has
installed policy rules any user can ask for fewer slots than there are
rules and run off the end of the allocation. A rule_cnt of 0 leaves the
buffer pointer NULL and the walk dereferences it.
Count into a local so the caller's limit survives the walk, and stop with
-EMSGSIZE once it is reached. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context
Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP
garbage-collection workqueue, rather than the NAPI poll context. For any
unmatched PTP entries carrying an SKB, it calls
mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For
ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end
of that function is the following:
skb->protocol = eth_type_trans(skb, skb->dev);
napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb);
The napi pointer is one that was placed in the SKB control block when the
trapped packet was received in the NAPI context. Later, when the GC reaps
the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to
napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe
if the poll is running concurrently on another CPU.
In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent
softirq processing, but this only applies to the local CPU. Additionally,
its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish()
invokes netif_receive_skb(). This has not been accurate since the
referenced commit; this patch makes that comment accurate again.
mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX
net_device without any conditions. The NAPI instance's poll, which may be
running concurrent to the GC, is running as an independently-scheduled
kthread which may be on a different CPU. The call to local_bh_disable()
does not guard against this.
If a tx-timestamp timeout produces an unmatched entry (which can be easily
reproduced by running ptp4l and waiting for a port to reach the
UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of
a poll on another CPU, both sides mutate the GRO list concurrently, as
shown below:
[39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE
list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy)
Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018
RIP: 0010:__list_add_valid_or_report+0x79/0xb0
RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246
RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540
RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003
R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0
Call Trace:
<TASK>
gro_receive_skb+0xee/0x230
mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum]
mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core]
mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci]
__napi_poll+0x31/0x1e0
napi_threaded_poll_loop+0x16b/0x1c0
napi_threaded_poll+0x71/0xa0
kthread+0xfb/0x260
ret_from_fork+0x22d/0x260
ret_from_fork_asm+0x1a/0x30
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
The machinery that leads to this kernel panic has not been changed between
6.18.48 and mainline.
This patch adds an ingress-delivery helper for the PTP packet_finish()
path that calls netif_receive_skb() instead of napi_gro_receive().
netif_receive_skb(), unlike napi_gro_receive(), can be called from outside
of the NAPI instance's poll context, which can occur at the call site for
this path. RX stats accounting and the skb->dev assignment are still
preserved; the only change is the delivery call itself.
This removes GR
---truncated--- |
| A flaw was found in crun. When the container configuration does not give /dev a dedicated mount, terminal setup can redirect /dev/console onto an attacker-controlled path, including via the read-only-rootfs bind-mount fallback. Affected versions are crun 1.29.1 and earlier. Default configurations that mount a fresh /dev are not exposed. No fixed release is available yet. |
| BusyBox passwd/group tokenize() references a stale endpoint pointer after trimming, causing an out-of-bounds write of heap pointers. |
| BusyBox dpkg read_package_field() steps past a NUL terminator on malformed .deb packages, causing an out-of-bounds heap read. |
| BusyBox httpd treats yescrypt ($y$) password hashes as plaintext during Basic Authentication, inverting the authentication check. |
| BusyBox httpd IP deny rules with invalid CIDR prefix lengths fail open, leaving a parsed IP with a zeroed mask so the rule matches no clients. |
| Horilla is an HR and CRM software. Prior to 2.0.0, approve_validate_attendance_request at /attendance/approve-validate-attendance-request/ changes attendance_validated, is_validate_request_approved, approved_by, and related pending-request state through an HTTP GET before calling attendance.save(), so Django does not require CSRF validation for the action. An unauthenticated attacker can cause a logged-in manager with attendance.change_attendance to make a top-level request that carries the manager's SameSite=Lax session cookie, silently approving attendance with the victim's privileges and attributing the approval to the victim in the audit trail. This issue is fixed in version 2.0.0. |
| gitoxide gix-fs before 0.23.0 contains a path validation bypass vulnerability in the worktree checkout mechanism that allows attackers to escape the worktree directory via symlink manipulation. During forced checkout with overwrite_existing enabled, attackers can craft malicious repository trees where symlink entries replace validated directories, causing subsequent files to be written outside the worktree through the symlink for code execution or file manipulation. |
| Horilla is an HR and CRM software. Prior to 2.0.0, HorillaListView.export_data in horilla_views/generic/cbv/views.py accepts an authenticated user's columns POST parameter, takes field_tuple[1], interpolates it into dynamic_fn_str as Python source, and passes the generated function definition to exec(). A crafted string that remains valid under ast.literal_eval can inject Python syntax into a default argument evaluated during function definition, allowing arbitrary operating-system commands to execute with the application process privileges, including root privileges in the shipped Docker image. This issue is fixed in version 2.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix double-unmap of directory block
Fix afs_edit_dir_remove() to use a cleanup function to unmap the block
pointed to by afs_dir_iter::block if it's left pointing to something rather
than manually kunmapping the blocks. Manually kunmapping without clearing
iter.blocks can result in a double-kunmap if afs_dir_find_block() is called
twice in a row (which would be the case if the block being modified is not
first in the hash chain). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix wrong return code to engine in asynch callbacks
When crypto_finalize_hash_request() or
crypto_finalize_skcipher_request() explicitly completes a request, the
do_one_request callback must return 0 to indicate successful
handling. Returning a negative error code causes the crypto engine to
assume the driver failed to take ownership and triggers a second
completion via crypto_request_complete(), resulting in a double
completion. This pattern occurs in paes_s390.c 4 times and once in
phmac_s390.c.
Fixed in phmac_do_one_request() and all four paes do_one_request
callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit
finalization instead of propagating the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Check resize_disabled before publishing the new subbuf order
ring_buffer_subbuf_order_set() stores the new order and only then walks
the CPUs, returning -EBUSY if any of them has resizing disabled. A user
mapped buffer has resizing disabled, and __rb_map_vma() reads
buffer->subbuf_order without buffer->mutex, so an mmap of an already
mapped CPU racing the failing order change sizes the mapping with the
new order and inserts pages past the sub-buffer into the VMA.
Check the CPUs before storing the new order. |
| In the Linux kernel, the following vulnerability has been resolved:
genetlink: pin family module during policy dump
The generic netlink controller's policy dump keeps pointers to the target
family's operation and policy tables in its callback state. A dump may be
split across multiple skbs and remain pending after the initial request.
Netlink pins the module which owns the dump callback, but in this case
that is the controller's owner rather than the target family's owner. The
target family can consequently be unregistered and its module unloaded
while a policy dump is pending. Advancing the dump then dereferences
policy memory from the unloaded module.
Take a reference to the target family's module when the dump starts.
Drop it from the error and done paths. This matches the lifetime for which
the dump context retains the family and policy pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Ensure SRAM size is 0 on mapping failure
On a mapping failure of the SRAM, the SRAM size is left as non-zero. The
probe will succeed as the error return is not checked since having SRAM is
not a hard requirement. The non-zero size allows jobs to access SRAM which
is left pointing to physical base address 0x0. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmr: account multicast table and route memory
A netadmin in a user+net namespace can create many IPv4 and IPv6
multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen
id allocates an mr_table via the shared mr_table_alloc(), links it
into the per-net list, and leaves it until netns teardown. Those
objects were not charged to memcg, so the host unreclaimable slab
grows with the table count.
Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the
IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established
handling of IP addresses, routes and alternate interface names.
Unresolved MFC entries are still allocated from softIRQ with
GFP_ATOMIC and are not charged. They expire after 10 seconds and are
bounded by the socket receive queue; see commit 0079ad8e8dc3
("ipmr: remove hard code cache_resolve_queue_len limit"). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race
Commit ba7425312607 ("mm, slab: add an optimistic
__slab_try_return_freelist()") incorrectly assumed that nobody has freed
an object to the slab as long as slab->freelist is NULL and cmpxchg
succeeds.
However, as reported by Hyunwoo Kim [1], other CPUs might have freed
an object to the slab, insert the slab to the partial list, then
allocated an object from the slab, and be in the middle of removing
the slab from the list under n->list_lock.
Since __refill_objects_node() puts the slab back on pc.slabs
outside n->list_lock, it might insert the slab into that list while
the slab is concurrently being removed from n->partial.
This led to a list corruption [1]:
list_add corruption. next->prev should be prev
(ffff888100000248), but was dead000000000122.
(next=ffffea000416e410).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted
7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy)
RIP: 0010:__list_add_valid_or_report+0x80/0xd0
...
Call Trace:
alloc_from_new_slab+0x183/0x300
___slab_alloc+0x31c/0x890
__kmalloc_noprof+0x3d4/0x800
lsm_blob_alloc+0x2d/0x50
security_msg_msg_alloc+0x26/0x90
load_msg+0x1aa/0x210
do_msgsnd+0x91/0x800
do_syscall_64+0x109/0x5d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Kernel panic - not syncing: Fatal exception
This is a classic ABA problem where cmpxchg succeeds but the state has
changed since __refill_objects_node() took the freelist from the slab.
As Vlastimil Babka mentioned [2], it should be rare to return more than
one slab (due to the racy read of slab->counters in
get_partial_node_bulk()). Therefore, instead of introducing additional
complexity, acquire and release n->list_lock twice in the worst case.
Return the slab directly to the partial list and hold n->list_lock
across the cmpxchg and add_partial(). This is similar to the initial
version of commit ba7425312607 [3]. This is enough to avoid the race as
the list manipulation is serialized by n->list_lock. While at it,
bring back unlikely() hint now that the condition is unlikely. |
