| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_net: check TX pull result before RX copy
vringh_iov_pull_iotlb() returns a signed byte count. A failed TX pull is
currently added to the unsigned byte counter and then passed as a size_t
length to receive_filter() and vringh_iov_push_iotlb(). A negative error
can therefore become a large length in the RX path.
Handle non-positive pull results before every length use. Count the TX
error and complete the consumed TX descriptor with zero bytes.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
nstree: check listing permission before taking a namespace reference
legitimize_ns() takes a reference on the candidate namespace before
may_list_ns() has decided whether the caller may see it. The
__free(ns_put) cleanup on the denied path can drop the last reference to a
mount namespace while we still hold the rcu read lock, and put_mnt_ns()
may sleep there. This is the same problem commit 2ec2aff3c8e2 ("ns: make
sure reference are dropped outside of rcu lock") fixed for the put_user()
path. Neither ns_requested() nor may_list_ns() needs a reference, both
only look at the namespace type and at the caller's own namespaces, so do
the checks first and take the reference last.
Splat:
Voluntary context switch within RCU read-side critical section!
WARNING: kernel/rcu/tree_plugin.h:332 at rcu_note_context_switch+0x238/0x2a0, CPU#5: a/3442
CPU: 5 UID: 1000 PID: 3442 Comm: a Not tainted 7.0.0-30-generic #30-Ubuntu PREEMPT(lazy)
RIP: 0010:rcu_note_context_switch+0x238/0x2a0
Call Trace:
<TASK>
__schedule+0xcf/0x650
schedule+0x27/0x90
schedule_preempt_disabled+0x15/0x30
__mutex_lock.constprop.0+0x550/0xaf0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3b/0x50
exp_funnel_lock+0xb2/0x260
synchronize_rcu_expedited+0xe7/0x220
namespace_unlock+0x26a/0x320
put_mnt_ns+0xd3/0x120
mntns_put+0xe/0x20
do_listns+0x13e/0x560
__do_sys_listns+0x126/0x2d0
__x64_sys_listns+0x20/0x30
x64_sys_call+0x2366/0x2390
do_syscall_64+0x105/0x5a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: hinic: fix mailbox segment buffer overflow
check_mbox_seq_id_and_seg_len() validates that seq_id does not
exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed
MBOX_SEG_LEN (48). However, this allows the last segment
(seq_id=42) to carry a full 48-byte payload, writing to offset
42*48=2016 for 48 bytes (ending at byte 2064). The receive
buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a
16-byte heap buffer overflow.
The hinic3 driver already handles this correctly by defining
MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it
exceeds the remaining buffer space. Apply the same fix to the
hinic driver. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix fib6 walker UAF on seq stop
ipv6_route_iter_active() treats a walker in FWS_U at the table root as
already unlinked. fib6_del_route() can move a still-linked walker into
that same state when the current leaf is the last route at the root,
so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq
private object can then be freed while it remains on
net->ipv6.fib6_walkers. A later route deletion walks the dangling list
and uses the freed walker.
Use the list head as membership state and reinitialize it when
unlinking. Keep the existing w->node check so a never-started iterator
with a zeroed private object is not treated as linked.
The same stop helper is used by /proc/net/ipv6_route and by the BPF
ipv6_route iterator. The BPF show path only widens the race. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: fork: Initialize function graph state before copy_exec_state()
dup_task_struct() copies the parent's task_struct, including ret_stack.
ftrace_graph_init_task() clears the copied function graph state, but it
currently runs after copy_exec_state().
For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state.
If that allocation fails, copy_process() reaches bad_fork_free and
free_task() calls ftrace_graph_exit_task(). Since the child still carries
the parent's ret_stack pointer, the unwind frees the parent's active
function graph return stack. The parent subsequently accesses freed memory
from function_graph_enter_regs().
KASAN reports:
[ 22.190920] ==================================================================
[ 22.195899] BUG: KASAN: slab-use-after-free in function_graph_enter_regs+0xa76/0xb90
[ 22.200747] Write of size 8 at addr ff110000054dc0a8 by task repro/1
[ 22.205134]
[ 22.210770] CPU: 0 UID: 0 PID: 1 Comm: repro Not tainted 7.2.0-07732-g9328b3b03bdc-dirty #3 PREEMPT(lazy)
[ 22.212576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 22.213750] Call Trace:
[ 22.215271] <TASK>
[ 22.216242] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.217774] dump_stack_lvl+0x4e/0x70
[ 22.220531] print_report+0x157/0x4b4
[ 22.223202] ? fixup_red_left+0x9/0x30
[ 22.224407] ? complete_report_info+0x83/0x110
[ 22.226679] ? function_graph_enter_regs+0xa76/0xb90
[ 22.228084] kasan_report+0xce/0x100
[ 22.230109] ? function_graph_enter_regs+0xa76/0xb90
[ 22.232860] ? stack_trace_save+0x4/0xd0
[ 22.234156] function_graph_enter_regs+0xa76/0xb90
[ 22.236090] ? kasan_save_stack+0x30/0x50
[ 22.237752] ? __pfx_function_graph_enter_regs+0x10/0x10
[ 22.238694] ? ring_buffer_lock_reserve+0x345/0xf80
[ 22.239628] ? stack_trace_save+0x4/0xd0
[ 22.242121] ? stack_trace_save+0x4/0xd0
[ 22.243588] ftrace_graph_func+0xda/0x160
[ 22.245362] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.246520] 0xffffffffa0000095
[ 22.250528] ? stack_trace_save+0x9/0xd0
[ 22.251757] ? ring_buffer_unlock_commit+0x11d/0x5c0
[ 22.253152] stack_trace_save+0x9/0xd0
[ 22.254264] kasan_save_stack+0x30/0x50
[ 22.273631] kasan_save_track+0x14/0x30
[ 22.276763] kasan_save_free_info+0x3b/0x70
[ 22.278296] __kasan_slab_free+0x43/0x70
[ 22.280157] kmem_cache_free+0xbf/0x3b0
[ 22.282963] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.284001] free_task+0xa2/0x160
[ 22.285699] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.286752] copy_process+0x2aae/0x7bc0
Initialize the child function graph state immediately after
dup_task_struct(), before the first fallible operation. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us122l: Prevent write upgrades for read mappings
The hwdep mmap callback rejects read-buffer mappings that are initially
writable, but leaves VM_MAYWRITE set on mappings created with PROT_READ.
A process that can open the hwdep node O_RDWR can later use mprotect() to
make the mapping writable.
The read allocation begins with struct usb_stream. Its read_size member is
used by the fault handler to decide which pages belong to the read buffer.
The read VMA intentionally remains expandable because pcm_usb_stream uses
mremap() after reading that size. Changing read_size first can therefore
map and access pages beyond the allocation. The same member is also
consumed by usb_stream_free(), where changing it can make
free_pages_exact() release pages outside the allocation.
Clear VM_MAYWRITE for read-buffer mappings after rejecting an initially
writable VMA. This keeps the separate output-buffer mapping writable while
preventing later permission upgrades. |
| In the Linux kernel, the following vulnerability has been resolved:
ufs: validate cylinder group metadata before caching it
ufs_read_cylinder() copies the cylinder group index and the rotor
positions straight from the on-disk group and caches them without any
check:
ucpi->c_cgx = fs32_to_cpu(sb, ucg->cg_cgx);
ucpi->c_rotor = fs32_to_cpu(sb, ucg->cg_rotor);
ucpi->c_frotor = fs32_to_cpu(sb, ucg->cg_frotor);
ucpi->c_irotor = fs32_to_cpu(sb, ucg->cg_irotor);
They are then used as indices during allocation and free:
- c_cgx indexes the cylinder summary array as
UFS_SB(sb)->fs_cs(ucpi->c_cgx), so a value past s_ncg writes a 32
bit count outside the s_csp allocation.
- c_frotor becomes a bitmap scan start, start = c_frotor >> 3, and
then length = ((s_fpg + 7) >> 3) - start. A start beyond the block
bitmap wraps the unsigned length to a huge value, so ubh_scanc()
walks far past the cylinder group buffers. c_irotor drives the
inode bitmap the same way.
A crafted image can set any of these freely, turning an ordinary
allocation into an out of bounds access.
Reject a cylinder group whose recorded index does not match the group
being read, or whose rotors fall outside the group, before the metadata
is cached. Valid filesystems keep cg_cgx equal to the group number and
the rotors within the group, so only malformed images are rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Ensure SRAM region size matches job
It is possible for userspace to set the job SRAM size to 0, but then still
have SRAM accesses in the command stream. When the job SRAM size is 0,
setting the region base register is skipped and a stale base address from
a prior job is used.
Check the region size against the job's SRAM size instead of just the size
of the SRAM. The job's SRAM size was already checked against the total SRAM
size. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: sprd: validate compress buffer sizes against fixed allocations
sprd_platform_compr_open() allocates the stage 0 IRAM buffer (32K data
area) and the stage 1 DDR buffer (2M data area) with fixed sizes, but
sprd_platform_compr_copy() derives all copy lengths from the user
controlled runtime->fragment_size and the write() count, never
comparing them against the physical buffer sizes. The compress core
only checks fragment_size * fragments for an u32 overflow in
snd_compress_check_input(), so a local user can configure a logical
buffer of up to ~4GB via SNDRV_COMPRESS_SET_PARAMS, far exceeding the
fixed allocations.
A fragment_size larger than the 32K IRAM data area makes the stage 0
copy_from_user() overflow past the IRAM allocation, and a buffer_size
larger than the 2M DDR buffer makes the wrapping copy at the end of
sprd_platform_compr_copy() write fully user controlled data past the
buffer. No SNDRV_PCM_TRIGGER_START is needed, a write() in SETUP
state reaches the copy callback directly.
Reject parameters that do not fit into the fixed buffers in
set_params(), and fix the advertised max fragment size: 128K never
fitted into the 32K IRAM buffer. The caps values may have been carried over
from the qdsp6 driver, which allocates its buffers according to the
advertised maxima, unlike this driver. With 32K as max fragment size
the advertised limits are self-consistent: 32K * 64 = 2M equals the
DDR buffer size.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: hold a reference to thread_pid across proc_flush_pid
Commit 0a36bad01731 ("release_task: kill the no longer needed
get/put_pid(thread_pid)") removed the reference around proc_flush_pid().
It assumed that free_pids(post.pids) at the end of release_task() would
keep thread_pid alive until then.
That assumption is wrong. __change_pid() only records a detached PID in
post.pids when pid_has_task() is false for every PIDTYPE. If another task
still uses the exiting task's PID as its process group or session ID,
__unhash_process() removes the exiting task's PIDTYPE_PID link but leaves
the PID out of post.pids. release_task() therefore holds no reference to
it after dropping tasklist_lock.
The other task can then remove the remaining PIDTYPE links. Its
free_pids() call schedules delayed_put_pid(), and the RCU callback can free
the PID before the first release_task() reaches proc_flush_pid().
An unprivileged reproducer races wait4(-1) against setsid() to trigger this
ordering. Three of three fresh v7.2 KASAN boots reported:
BUG: KASAN: slab-use-after-free in
proc_invalidate_siblings_dcache+0x3e2/0x3f0
Read of size 8 by task h7_pid_reaper/1921
Call Trace:
proc_invalidate_siblings_dcache
release_task
wait_consider_task
__do_wait
do_wait
kernel_wait4
Freed by task 0:
kmem_cache_free
put_pid
delayed_put_pid
rcu_core
Last potentially related work creation:
__call_rcu_common
free_pids
ksys_setsid
KASAN identified a 144-byte object from the pid cache and located the bad
read 80 bytes into the freed object, matching pid->inodes. With an
explicit reference, three of three fresh boots completed without a KASAN
report. The concurrent RCU callback dropped its reference while
proc_flush_pid() was protected, and the balancing put_pid() performed the
final free afterward.
Take a reference before __unhash_process() clears p->thread_pid and release
it after proc_flush_pid() completes.
A tested source reproducer is available privately on request. No
controlled read or write, information leak, or privilege escalation is
claimed. The mainline patch applies directly to v6.19.y and newer;
v6.16.y through v6.18.y need a context-adjusted backport. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mpls: clear inner_protocol when the last label is popped
skb_mpls_push() records the pre-encapsulation network header once, gated
on !skb->inner_protocol. skb_mpls_pop() never clears that record, so it
outlives the encapsulation it describes.
Open vSwitch can then re-push MPLS onto a packet whose
inner_network_header still points at the older, deeper offset: push a
label, pop every label, recirculate (ovs_flow_key_update() re-derives
key->eth.type and resets network_header, but leaves inner_*), then push
again. ovs_fragment() trusts the record:
skb->network_header = skb->inner_network_header;
so skb_network_offset() goes negative. The bound check is signed:
if (skb_network_offset(skb) > MAX_L2_LEN)
a negative offset passes it, and prepare_frag() widens the value:
unsigned int hlen = skb_network_offset(skb);
memcpy(&data->l2_data, skb->data, hlen);
which is a ~4GiB memcpy out of a 30-byte per-CPU buffer.
Reproduced on v7.3-rc1. RDX is the truncated length, (unsigned int)(-8):
BUG: unable to handle page fault for address: ffffe8ffffc16000
#PF: supervisor write access in kernel mode
Oops: 0002 [#1] SMP KASAN NOPTI
RIP: 0010:memcpy+0x8/0x20
RDX: 00000000fffffff8 RSI: ffff888105d732db RDI: ffffe8ffffc16000
prepare_frag+0x3df/0x4e0
ovs_fragment+0x589/0x7e0
do_output+0x4ce/0x5e0
do_execute_actions+0x55d2/0x7b30
ovs_execute_actions+0xea/0x450
Same root-cause shape as commit 975b5b067f52 ("ipv6: sr: restore network
header before routing and forwarding"): a stale network header offset
reaching a consumer that widens it. Here it originates in the MPLS
push/pop path.
Clear inner_protocol once the packet is no longer MPLS, so a later push
re-records the current header. net/sched/act_mpls.c is the only other
skb_mpls_pop() caller and gets the same fix; sch_frag.c saves and
restores inner_protocol around fragmentation in the same way OVS does. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix use-after-free of the flow table mask array
tbl_mask_array_realloc() retires the old mask_array before it stops being
reachable:
old = ovsl_dereference(tbl->mask_array);
if (old) {
...
call_rcu(&old->rcu, mask_array_rcu_cb);
}
rcu_assign_pointer(tbl->mask_array, new);
call_rcu() only waits for read-side critical sections already in flight.
tbl->mask_array still points at old between the call_rcu() and the
rcu_assign_pointer(), so a reader entering ovs_flow_tbl_lookup_stats() in
that window picks up old in a fresh critical section that the pending
grace period does not cover.
tbl_mask_array_realloc() runs in process context under ovs_mutex, so the
window is preemptible and can outlast the grace period. Then
mask_array_rcu_cb() frees old before the swap runs:
BUG: KASAN: slab-use-after-free in flow_lookup.constprop.0+0x2bf/0x2f0
Read of size 8 at addr ffff888020b3e018 by task poc/741
flow_lookup.constprop.0+0x2bf/0x2f0
ovs_flow_tbl_lookup_stats+0x4a3/0x5c0
ovs_dp_process_packet+0x19c/0x710
ovs_vport_receive+0x243/0x390
internal_dev_xmit+0x81/0x170
Freed by task 728:
kfree+0x16a/0x4e0
rcu_core+0x853/0x1030
Publish the new array before retiring the old one. The kfree_rcu() that
call_rcu() replaced ran after the swap. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: cttimeout: prevent UAF during module unload
nf_ct_set_timeout() protects the timeout hook dereference and policy lookup
with rcu_read_lock(). cttimeout_exit(), however, unregisters the per-net
operations before it clears the hook.
This allows the following interleaving:
CPU 0 CPU 1
cttimeout_exit() nf_ct_set_timeout()
unregister_pernet_subsys() rcu_read_lock()
kfree(pernet) h = nf_ct_timeout_hook
h->timeout_find_get()
nfct_timeout_pernet()
The hook still points to ctnl_timeout_find_get() when CPU 1 looks up the
already freed per-net timeout list. KASAN reported:
BUG: KASAN: slab-use-after-free in ctnl_timeout_find_get
Read of size 8 by task poc/90
Call Trace:
ctnl_timeout_find_get+0x271/0x2a0 [nfnetlink_cttimeout]
nf_ct_set_timeout+0x7b/0x3c0
xt_ct_tg_check+0x724/0xb20
xt_check_target+0x234/0xa90
do_ipt_set_ctl+0x570/0x1270
Allocated by task 89:
__kmalloc_noprof+0x16e/0x460
ops_init+0x6d/0x420
register_pernet_operations+0x2f6/0x670
Freed by task 91:
kfree+0x131/0x390
ops_undo_list+0x3d4/0x730
unregister_pernet_operations+0x232/0x490
unregister_pernet_subsys+0x1c/0x30
cttimeout_exit+0x52/0x970 [nfnetlink_cttimeout]
Clear the hook and wait for existing readers before unregistering the
per-net operations. This blocks new policy lookups and ensures readers that
observed the hook finish before the per-net storage is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_log: unregister loggers before per-net teardown
nf_log_syslog and nfnetlink_log unregister their per-network namespace
operations before unregistering their global logger backends. This
leaves a window where a sysctl or netlink writer can rebind the still-
registered logger after the per-net pre-exit callback cleared the old
selection.
The race looks like this:
CPU 0 CPU 1
---- ----
unregister_pernet_subsys()
nf_log_unset(net, logger)
net->nf.nf_loggers[pf] = NULL
lock nf_log_mutex
find logger in loggers[][]
net->nf.nf_loggers[pf] = logger
unlock nf_log_mutex
nf_log_unregister(logger)
lock nf_log_mutex
loggers[pf][type] = NULL
unlock nf_log_mutex
synchronize_rcu()
module exit returns
module core frees backend memory
Later, a sysctl read or packet logging operation can dereference the
stale per-net logger pointer.
Fix this by unregistering the global logger backends before tearing down
per-net state. Once the global registrations are gone, later writers can
no longer rebind the logger. unregister_pernet_subsys() already waits
for an RCU grace period after the pre-exit callback clears the per-net
selection, while nf_log_unregister() continues to cover readers of the
global logger table.
Apply this ordering fix to both nf_log backends that combine per-net
teardown with global logger registration. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: invalidate queues before flushing them
fqdir_pre_exit() flushes the skbs from incomplete queues without
changing their completion state. A fragment which found a queue before
high_thresh was cleared can then acquire the queue lock and reuse stale
reassembly metadata. A queue concurrently killed after fqdir->dead is
set can instead become INET_FRAG_COMPLETE|INET_FRAG_HASH_DEAD while
still holding its old skbs; skipping it because it is complete leaves
those references behind until asynchronous fqdir teardown.
For IPv6, stale metadata can make ip6_frag_reasm() use the old
nhoffset with a new skb and access memory out of bounds. The resulting
heap corruption can be leveraged for local privilege escalation when
unprivileged network namespaces are available. Unflushed fragments can
also keep conntrack references alive after the conntrack per-net
cleanup point.
Kill each incomplete queue, then flush every queue still owned by the
dying rhashtable. HASH_DEAD identifies that ownership, while complete
queues without it are already owned by another destroy path and must be
left alone. Releasing a timer reference removed by inet_frag_kill() is
deferred to inet_frag_putn(), after the queue lock is dropped.
KASAN report:
BUG: KASAN: slab-out-of-bounds in ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
Write of size 1 at addr ff110001039c6e00 by task poc/771
Call Trace:
? ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479 (discriminator 5))
ip6_input_finish (net/ipv6/ip6_input.c:534)
ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3))
packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
The buggy address belongs to the object at ff110001039c6b40
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 0 bytes to the right of
allocated 704-byte region [ff110001039c6b40, ff110001039c6e00)
BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
Read of size 1 at addr ff110001039c6e08 by task poc/771
Call Trace:
? ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
ip6_input_finish (net/ipv6/ip6_input.c:534)
ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3))
packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
packet_sendmsg (net/packet/af_packet.c:2959 net/packet/af_packet.c:3053 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
The buggy address belongs to the object at ff110001039c6b40
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 8 bytes to the right of
allocated 704-byte region [ff110001039c6b40, ff110001039c6e00) |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: fix use-after-free of sdata via queued RX frames
The RX softirq producer ieee802154_subif_frame() queues received beacon
and MAC-command frames onto local->rx_beacon_list / rx_mac_cmd_list and
schedules a process-context worker, storing a raw mac_pkt->sdata (and
skb->dev == sdata->dev) with neither a reference nor any locking:
- the lists have no lock: the softirq producer list_add_tail()s while the
mac_wq worker list_del()s, so sibling interfaces on the same phy corrupt
the list;
- the workers dereference the interface after it may have been freed.
mac802154_rx_mac_cmd_worker() touches mac_pkt->sdata directly, and
mac802154_rx_beacon_worker() -> mac802154_process_beacon() dereferences
skb->dev (== sdata->dev). Removing an interface frees its sdata
(netdev_priv) while a queued frame still points at it, so a later worker
run is a use-after-free.
Reproduced under KASAN by flooding a victim interface with MAC command
frames and removing it (the beacon path is the same class via skb->dev):
BUG: KASAN: slab-use-after-free in mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154]
Read of size 4 at addr ffff888002f9ea18 by task kworker/u8:1/31
Workqueue: phy0-mac-cmds mac802154_rx_mac_cmd_worker [mac802154]
Call Trace:
mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154]
process_one_work+0x611/0xe80
worker_thread+0x52e/0xdc0
kthread+0x30c/0x630
ret_from_fork+0x2fd/0x3e0
Fix both lists together:
- add local->rx_lock and take it around every list access: the softirq
producer (plain spin_lock, softirq context) and the workers and flush
(spin_lock_bh, process context);
- pin the interface for the lifetime of a queued frame with
netdev_hold()/netdev_put(), so the worker can safely dereference sdata /
skb->dev even while the interface is being removed;
- dequeue under the lock at the head and loop-drain the whole list in the
workers (they previously processed one frame per run and relied on a
later enqueue to drain the rest);
- drop not-yet-started frames of an interface before it is unregistered,
from ieee802154_if_remove() (after the RCU grace period) and from the
ieee802154_remove_interfaces() loop -- the latter is the whole-phy
teardown path, which does not go through ieee802154_if_remove().
An in-flight worker that already dequeued a frame keeps its own netdev
reference; unregister_netdevice() then waits it out in netdev_run_todo(),
which runs at rtnl_unlock() (rtnl released) and after the interface has
been closed, so it does not pin rtnl. A worker blocked in an association
TX only delays that one interface's unregister (the usual "waiting for %s
to become free"), it does not hold rtnl. netdev_hold() is used for this
reason instead of a cancel_work_sync() under rtnl, which would block on
the worker's unbounded MLME TX wait via ieee802154_sync_queue().
The mac-command worker additionally skips processing for a stopped
interface (ieee802154_sdata_running()), avoiding a needless association
response during teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix use-after-free of the source's parent directory
current_check_refer_path() reads old_dentry->d_parent without holding a
reference nor a lock on it, and then dereferences it in
collect_domain_accesses() and in the audit record.
A reference on a child does not pin its parent: __d_move() reassigns
dentry->d_parent and drops the reference the child held on its former
parent. hook_path_rename() is not affected because the rename path
calls lock_rename() before the hook, so the source cannot be reparented
under it. hook_path_link() has no such protection: filename_linkat()
holds a reference on the source dentry but neither locks nor references
its parent, so a concurrent rename(2) can reparent the source while
security_path_link() runs, and the former parent can then be removed and
freed while the hook walks it.
A process can trigger this after entering a Landlock domain that handles
at least one filesystem access right. The process can then race a
linkat(2) loop against rename(2) and rmdir(2):
BUG: KASAN: slab-use-after-free in collect_domain_accesses+0x278/0x290
Read of size 4 at addr ffff888160bd53f4 by task llrepro2/549
collect_domain_accesses+0x278/0x290
current_check_refer_path+0x952/0x1120
security_path_link+0x1be/0x320
filename_linkat+0x342/0x6d0
__x64_sys_linkat+0xfa/0x150
Freed by task 562:
kmem_cache_free+0x139/0x4c0
i_callback+0x4b/0x80
rcu_core+0x7dc/0x10a0
Take a reference on the dentry selected as the source parent, using
dget() for the common-mount-root case and dget_parent() otherwise.
Release it after the hierarchy walk and synchronous audit logging.
[mic: Clarify the caller, reachability, and reference handling] |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix wrong return code to engine in asynch callbacks
When crypto_finalize_hash_request() or
crypto_finalize_skcipher_request() explicitly completes a request, the
do_one_request callback must return 0 to indicate successful
handling. Returning a negative error code causes the crypto engine to
assume the driver failed to take ownership and triggers a second
completion via crypto_request_complete(), resulting in a double
completion. This pattern occurs in paes_s390.c 4 times and once in
phmac_s390.c.
Fixed in phmac_do_one_request() and all four paes do_one_request
callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit
finalization instead of propagating the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix incorrect free in candidate cleanup in afs_lookup_server()
Fix afs_lookup_server() to not free an existing server's endpoint state
when cleaning up a candidate server. The candidate record doesn't have an
endpoint state yet at this point, so the free for that can just be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Clear stale peer app data after address list changes
afs_fs_probe_fileserver() fetches the current endpoint state under
server->fs_lock, but leaves old_alist as NULL. Consequently,
afs_set_peer_appdata() treats every address list replacement as initial
setup and only binds the new peers; it never unbinds peers removed from
the old list.
An address refresh can therefore proceed as follows. CPU 0 replaces
server S's list and drops Pold without clearing Pold->app_data. The
server destroyer then clears only S's current peers and lets S reach its
RCU callback. After the callback frees S, CPU 1 handles a callback
through an RxRPC connection that still pins Pold, reads Pold->app_data,
and calls afs_use_server() on the freed object.
KASAN reported:
BUG: KASAN: slab-use-after-free in afs_find_server+0x3c/0xa0
Read of size 4 at addr ffff8881013e1af0 by task krxrpcio/7001/74
Call Trace:
afs_find_server+0x3c/0xa0
afs_rx_new_call+0x15c/0x390
rxrpc_new_incoming_call+0x97c/0x1730
rxrpc_input_packet.constprop.0+0xd03/0xec0
rxrpc_io_thread+0x967/0x1640
Allocated by task 93:
afs_lookup_server+0x1a7/0x14c0
afs_alloc_server_list+0x43f/0xb60
afs_create_volume+0x923/0x1490
afs_get_tree+0x1c6/0x10a0
Freed by task 0:
kfree+0x131/0x3c0
rcu_core+0x50a/0x1850
Last potentially related work creation:
__call_rcu_common.constprop.0+0x71/0xa10
afs_put_server+0x213/0x2b0
Preserve old->addresses for the peer app-data update so that removed
peers are cleared before the endpoint state is replaced. Also advance
both cursors when the old and new lists share a peer; activating the
old/new comparison without this would otherwise loop forever on the
shared entry. |
