| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper conditions check in some firmware for some Intel(R) NPU Drivers within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable data corruption. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper conditions check in some firmware for some Intel(R) NPU Drivers within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A Local Privilege Escalation vulnerability exists in the affected product. The vulnerability requires a local, low privileged threat actor to replace certain files during update and exists due to a failure to perform proper security checks before installation. |
| Kata Containers is an open source project focusing on a standard implementation of lightweight Virtual Machines (VMs) that perform like containers. In Kata Containers versions from 3.20.0 and before, a malicious host can circumvent initdata verification. On TDX systems running confidential guests, a malicious host can selectively fail IO operations to skip initdata verification. This allows an attacker to launch arbitrary workloads while being able to attest successfully to Trustee impersonating any benign workload. This issue has been patched in Kata Containers version 3.21.0. |
| An authenticated user with file access privilege via FTP access can cause the Relion 670/650 and SAM600-IO series device to reboot due to improper disk space management. |
| https://www.gnu.org/software/binutils/ nm >=2.43 is affected by: Incorrect Access Control. The type of exploitation is: local. The component is: `nm --without-symbol-version` function. |
| loona is an experimental, HTTP/1.1 and HTTP/2 implementation in Rust on top of io-uring. `loona-hpack` suffers from the same vulnerability as the original `hpack` as documented in issue #11. All users who try to decode untrusted input using the Decoder are vulnerable to this exploit. This issue has been addressed in release version 0.4.3. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Improper conditions check in some firmware for some Intel(R) NPU Drivers within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Wapro ERP Desktop is vulnerable to MS SQL protocol downgrade request from a server side, what could lead to an unencrypted communication vulnerable to data interception and modification. This issue affects Wapro ERP Desktop versions before 9.00.0. |
| JGraphT Core v1.5.2 was discovered to contain a NullPointerException via the component org.jgrapht.alg.util.ToleranceDoubleComparator::compare(Double, Double). NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification. |
| go-spacemesh is a Go implementation of the Spacemesh protocol full node. Nodes can publish activations transactions (ATXs) which reference the incorrect previous ATX of the Smesher that created the ATX. ATXs are expected to form a single chain from the newest to the first ATX ever published by an identity. Allowing Smeshers to reference an earlier (but not the latest) ATX as previous breaks this protocol rule and can serve as an attack vector where Nodes are rewarded for holding their PoST data for less than one epoch but still being eligible for rewards. This vulnerability is fixed in go-spacemesh 1.5.2-hotfix1 and Spacemesh API 1.37.1. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. When the ESP32 is in advertising mode, if it receives a connection request containing an invalid Access Address (AA) of 0x00000000 or 0xFFFFFFFF, advertising may stop unexpectedly. In this case, the controller may incorrectly report a connection event to the host, which can cause the application layer to assume that the device has successfully established a connection. This issue has been fixed in versions 5.5.2, 5.4.3, 5.3.5, 5.2.6, and 5.1.7. At time of publication versions 5.5.2, 5.3.5, and 5.1.7 have not been released but are fixed respectively in commits 3b95b50, e3d7042, and 75967b5. |
| OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. In version 4.5.0, using a specially crafted tee-supplicant binary running in REE userspace, an attacker can trigger a panic in a TA that uses the libutee Secure Storage API. Many functions in libutee, specifically those which make up the Secure Storage API, will panic if a system call returns an unexpected return code. This behavior is mandated by the TEE Internal Core API specification. However, in OP-TEE’s implementation, return codes of secure storage operations are passed through unsanitized from the REE tee-supplicant, through the Linux kernel tee-driver, through the OP-TEE kernel, back to libutee. Thus, an attacker with access to REE userspace, and the ability to stop tee-supplicant and replace it with their own process (generally trivial for a root user, and depending on the way permissions are set up, potentially available even to less privileged users) can run a malicious tee-supplicant process that responds to storage requests with unexpected response codes, triggering a panic in the requesting TA. This is particularly dangerous for TAs built with `TA_FLAG_SINGLE_INSTANCE` (corresponding to `gpd.ta.singleInstance` and `TA_FLAG_INSTANCE_KEEP_ALIVE` (corresponding to `gpd.ta.keepAlive`). The behavior of these TAs may depend on memory that is preserved between sessions, and the ability of an attacker to panic the TA and reload it with a clean memory space can compromise the behavior of those TAs. A critical example of this is the optee_ftpm TA. It uses the kept alive memory to hold PCR values, which crucially must be non-resettable. An attacker who can trigger a panic in the fTPM TA can reset the PCRs, and then extend them PCRs with whatever they choose, falsifying boot measurements, accessing sealed data, and potentially more. The impact of this issue depends significantly on the behavior of affected TAs. For some, it could manifest as a denial of service, while for others, like the fTPM TA, it can result in the disclosure of sensitive data. Anyone running the fTPM TA is affected, but similar attacks may be possible on other TAs that leverage the Secure Storage API. A fix is available in commit 941a58d78c99c4754fbd4ec3079ec9e1d596af8f. |
| A denial-of-service (DoS) vulnerability in Palo Alto Networks PAN-OS software enables an unauthenticated attacker to reboot a firewall by sending a specially crafted packet through the dataplane. Repeated attempts to initiate a reboot causes the firewall to enter maintenance mode.
This issue is applicable to the PAN-OS software versions listed below on PA-Series firewalls, VM-Series firewalls, and Prisma® Access software. This issue does not affect Cloud NGFW.
We have successfully completed the Prisma Access upgrade for all customers, with the exception of those facing issues such as conflicting maintenance windows. Remaining customers will be promptly scheduled for an upgrade through our standard upgrade process. |
| In EMQX before 5.8.6, administrators can install arbitrary novel plugins via the Dashboard web interface. NOTE: the Supplier's position is that this is the intended behavior; however, 5.8.6 adds a defense-in-depth feature in which a plugin's acceptability (for later Dashboard installation) is set by the "emqx ctl plugins allow" CLI command. |
| React Router is a router for React. Starting in version 7.2.0 and prior to version 7.5.2, it is possible to force an application to switch to SPA mode by adding a header to the request. If the application uses SSR and is forced to switch to SPA, this causes an error that completely corrupts the page. If a cache system is in place, this allows the response containing the error to be cached, resulting in a cache poisoning that strongly impacts the availability of the application. This issue has been patched in version 7.5.2. |
| VMware vCenter contains a denial-of-service vulnerability. A malicious actor who is authenticated through vCenter and has permission to perform API calls for guest OS customisation may trigger this vulnerability to create a denial-of-service condition. |
| A vulnerability has been identified in RUGGEDCOM i800 (All versions), RUGGEDCOM i801 (All versions), RUGGEDCOM i802 (All versions), RUGGEDCOM i803 (All versions), RUGGEDCOM M2100 (All versions), RUGGEDCOM M2200 (All versions), RUGGEDCOM M969 (All versions), RUGGEDCOM RMC30 (All versions), RUGGEDCOM RMC8388 V4.X (All versions), RUGGEDCOM RMC8388 V5.X (All versions < V5.10.0), RUGGEDCOM RP110 (All versions), RUGGEDCOM RS1600 (All versions), RUGGEDCOM RS1600F (All versions), RUGGEDCOM RS1600T (All versions), RUGGEDCOM RS400 (All versions), RUGGEDCOM RS401 (All versions), RUGGEDCOM RS416 (All versions), RUGGEDCOM RS416P (All versions), RUGGEDCOM RS416Pv2 V4.X (All versions), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.10.0), RUGGEDCOM RS416v2 V4.X (All versions), RUGGEDCOM RS416v2 V5.X (All versions < V5.10.0), RUGGEDCOM RS8000 (All versions), RUGGEDCOM RS8000A (All versions), RUGGEDCOM RS8000H (All versions), RUGGEDCOM RS8000T (All versions), RUGGEDCOM RS900 (All versions), RUGGEDCOM RS900 (32M) V4.X (All versions), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900G (All versions), RUGGEDCOM RS900G (32M) V4.X (All versions), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900GP (All versions), RUGGEDCOM RS900L (All versions), RUGGEDCOM RS900M-GETS-C01 (All versions), RUGGEDCOM RS900M-GETS-XX (All versions), RUGGEDCOM RS900M-STND-C01 (All versions), RUGGEDCOM RS900M-STND-XX (All versions), RUGGEDCOM RS900W (All versions), RUGGEDCOM RS910 (All versions), RUGGEDCOM RS910L (All versions), RUGGEDCOM RS910W (All versions), RUGGEDCOM RS920L (All versions), RUGGEDCOM RS920W (All versions), RUGGEDCOM RS930L (All versions), RUGGEDCOM RS930W (All versions), RUGGEDCOM RS940G (All versions), RUGGEDCOM RS969 (All versions), RUGGEDCOM RSG2100 (All versions), RUGGEDCOM RSG2100 (32M) V4.X (All versions), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100P (All versions), RUGGEDCOM RSG2100P (32M) V4.X (All versions), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2200 (All versions), RUGGEDCOM RSG2288 V4.X (All versions), RUGGEDCOM RSG2288 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300 V4.X (All versions), RUGGEDCOM RSG2300 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300P V4.X (All versions), RUGGEDCOM RSG2300P V5.X (All versions < V5.10.0), RUGGEDCOM RSG2488 V4.X (All versions), RUGGEDCOM RSG2488 V5.X (All versions < V5.10.0), RUGGEDCOM RSG907R (All versions < V5.10.0), RUGGEDCOM RSG908C (All versions < V5.10.0), RUGGEDCOM RSG909R (All versions < V5.10.0), RUGGEDCOM RSG910C (All versions < V5.10.0), RUGGEDCOM RSG920P V4.X (All versions), RUGGEDCOM RSG920P V5.X (All versions < V5.10.0), RUGGEDCOM RSL910 (All versions < V5.10.0), RUGGEDCOM RST2228 (All versions < V5.10.0), RUGGEDCOM RST2228P (All versions < V5.10.0), RUGGEDCOM RST916C (All versions < V5.10.0), RUGGEDCOM RST916P (All versions < V5.10.0). Affected devices do not properly handle malformed TLS handshake messages. This could allow an attacker with network access to the webserver to cause a denial of service resulting in the web server and the device to crash. |
| matrix-appservice-irc is a Node.js IRC bridge for the Matrix messaging protocol. matrix-appservice-irc before version 2.0.0 can be exploited to leak the truncated body of a message if a malicious user sends a Matrix reply to an event ID they don't have access to. As a precondition to the attack, the malicious user needs to know the event ID of the message they want to leak, as well as to be joined to both the Matrix room and the IRC channel it is bridged to. The message reply containing the leaked message content is visible to IRC channel members when this happens. matrix-appservice-irc 2.0.0 checks whether the user has permission to view an event before constructing a reply. Administrators should upgrade to this version. It's possible to limit the amount of information leaked by setting a reply template that doesn't contain the original message. See these lines `601-604` in the configuration file linked. |
| An issue in skteco.com Central Control Attendance Machine web management platform v.3.0 allows an attacker to obtain sensitive information via a crafted script to the csl/user component. |
