| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL
check_add_overflow() unconditionally writes the truncated sum into *d
even on overflow, per its contract in include/linux/overflow.h.
The four check_add_overflow() guards in set_posix_acl_entries_dacl()
and set_ntacl_dacl() break out of the ACE-building loops on overflow,
but the truncated *size is then consumed downstream at the end of
set_ntacl_dacl():
pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size);
This produces an on-wire NT ACL whose pndacl->size under-reports the
bytes actually written by the preceding fill_ace_for_sid()/memcpy()
calls, yielding a malformed ACL that can trigger out-of-bounds reads
when re-parsed by clients or ksmbd itself.
Restore *size to its pre-addition value on each overflow branch (via
`*size -= ace_sz` / `size -= nt_ace_size`) so that after the break,
*size once again holds the cumulative size of the successfully-written
ACEs. The committed ACL is then truncated-but-self-consistent rather
than malformed.
The ksmbd DACL builders are the only check_add_overflow() sites found
where an overflow path breaks out of a loop and the destination value
is consumed afterward. The other nearby break-style cases either
return -EINVAL on overflow (transport_ipc.c) or break without
consuming the overflowed destination value afterward (buildid.c). |
| nanoMODBUS through v1.23.0 contains an out-of-bounds stack read leading to a wild-pointer write in nmbs_read_device_identification_basic / recv_read_device_identification_res in nanomodbus.c. A fixed 3-element stack array order[3] = {0,1,2} maps object IDs to buffer indices. The server-supplied object_id field (0-255, read directly from the wire) is used without any bounds check as buf_index = order[object_id]. |
| driftregion iso14229 through 0.9.0 contains an integer underflow and downstream out-of-bounds read in the Handle_0x27_SecurityAccess function in iso14229.c that allows a remote unauthenticated attacker to crash a UDS server and potentially read memory past the receive buffer by sending a single-byte 0x27 SecurityAccess request that follows any earlier well-formed 0x27 message. |
| LiamBindle MQTT-C through version 1.1.6 contains a heap-based out-of-bounds read and integer underflow in the mqtt_unpack_publish_response function in src/mqtt.c that allows a remote unauthenticated attacker controlling an MQTT broker - or able to inject MQTT traffic into an unencrypted session - to crash a subscribed MQTT-C client and potentially disclose adjacent heap memory by sending a single crafted PUBLISH packet. |
| In the Linux kernel, the following vulnerability has been resolved:
netconsole: avoid OOB reads, msg is not nul-terminated
msg passed to netconsole from the console subsystem is not guaranteed
to be nul-terminated. Before recent
commit 7eab73b18630 ("netconsole: convert to NBCON console infrastructure")
the message would be placed in printk_shared_pbufs, a static global
buffer, so KASAN had harder time catching OOB accesses. Now we see:
printk: console [netcon_ext0] enabled
BUG: KASAN: slab-out-of-bounds in string+0x1f7/0x240
Read of size 1 at addr ffff88813b6d4c00 by task pr/netcon_ext0/594
CPU: 65 UID: 0 PID: 594 Comm: pr/netcon_ext0 Not tainted 6.19.0-11754-g4246fd6547c9
Call Trace:
kasan_report+0xe4/0x120
string+0x1f7/0x240
vsnprintf+0x655/0xba0
scnprintf+0xba/0x120
netconsole_write+0x3fe/0xa10
nbcon_emit_next_record+0x46e/0x860
nbcon_kthread_func+0x623/0x750
Allocated by task 1:
nbcon_alloc+0x1ea/0x450
register_console+0x26b/0xe10
init_netconsole+0xbb0/0xda0
The buggy address belongs to the object at ffff88813b6d4000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 0 bytes to the right of
allocated 3072-byte region [ffff88813b6d4000, ffff88813b6d4c00) |
| A vulnerability in the PDF file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition or possibly other expanded impacts as a result of memory corruption on an affected device.
This vulnerability is due to improper boundary checks for content in PDF files during scanning, which may result in an out-of-bounds buffer read. An attacker could exploit this vulnerability by submitting a crafted PDF file to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. |
| A vulnerability in the Mach-O file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition or possibly other expanded impacts as a result of memory corruption on an affected device.
This vulnerability is due to improper boundary checks for content in Mach-O files during scanning, which may result in an out-of-bounds buffer read. An attacker could exploit this vulnerability by submitting a crafted Mach-O file to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. |
| Imager versions from 0.45_02 before 1.034 for Perl may expose adjacent heap bytes via strlen() over-read from zero-count ASCII EXIF entries in copy_string_tags.
copy_string_tags() computes an ASCII EXIF tag's length as `entry->size - 1` to strip the trailing NUL. A zero-count ASCII entry sets `entry->size` to 0, and the derived length reaches i_tags_add() as -1, which is interpreted as a request to call strlen(), scanning past the entry to the next NUL and copying those bytes into the tag. JPEG reaches this path via im_decode_exif(), as does the separate Imager::File::WEBP distribution, which is fixed by upgrading Imager.
Any caller of Imager->read() on an attacker-supplied image with such an entry may receive an exif_* tag holding adjacent heap bytes instead of an empty string. |
| A maliciously crafted TIF file, when parsed through certain Autodesk products during image import, can cause an Out-of-Bounds Read in the image handling library. A malicious actor can leverage this vulnerability to cause a denial of service |
| A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information. |
| Out-of-bounds Read vulnerability in Apache Fory C++ deserialization.
This issue affects Apache Fory C++ versions from 0.14.0 before 1.5.0 when deserializing structs containing tagged integer fields. A crafted input payload may trigger an out-of-bounds heap read in the tagged integer fast-path deserializer, potentially causing information disclosure or denial of service.
Users are recommended to upgrade to Apache Fory 1.5.0, which fixes this issue. Applications that do not use Apache Fory C++ or do not use tagged integer fields are not affected. |
| node-re2 provides RE2 regular expression bindings for Node.js. Prior to version 1.26.1, passing a Buffer whose final bytes form a truncated (incomplete) multi-byte UTF-8 sequence could cause the native binding to read past the end of the allocated buffer while attempting to decode the final, incomplete code point. This could result in an out-of-bounds read and potential disclosure of adjacent memory contents. This issue is fixed in version 1.26.1. |
| A maliciously crafted PDF file, when parsed through Autodesk Revit, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. |
| Tobit Laboratories AG TeamDavid's Webbox application handles password changes using a function triggered by
including the string "(editini)" in the file path, writing the new
password to the specified "Archive.ini" file. However, the application
does not verify that the provided path actually refers to an
"Archive.ini" file. If an attacker specifies a different file with
excessive size, a buffer overflow occurs. This vulnerability allows an
unauthenticated attacker to crash the server, resulting in denial of
service. This issue affects TeamDavid through Rollout 524. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to execute code locally. |
| Out-of-bounds read in Microsoft Office allows an unauthorized attacker to disclose information locally. |
| Out-of-bounds read in Microsoft Office allows an unauthorized attacker to disclose information locally. |
| Out-of-bounds read in Microsoft Office allows an unauthorized attacker to disclose information locally. |
| Out-of-bounds read in Microsoft Office allows an unauthorized attacker to execute code locally. |
| Out-of-bounds read in Microsoft Office allows an unauthorized attacker to disclose information locally. |
