| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper conditions check for some Intel(R) Arc™ GPU may allow an authenticated user to potentially enable denial of service via local access. |
| LNbits is a Lightning wallet and accounts system. Paying invoices in Eclair that do not get settled within the internal timeout (about 30s) lead to a payment being considered failed, even though it may still be in flight. This vulnerability can lead to a total loss of funds for the node backend. This vulnerability is fixed in 0.12.6.
|
| An issue was discovered on Swissphone DiCal-RED 4009 devices. An attacker with access to the file /etc/deviceconfig may recover the administrative device password via password-cracking methods, because unsalted MD5 is used. |
| The Permission Model assumes that any path starting with two backslashes \ has a four-character prefix that can be ignored, which is not always true. This subtle bug leads to vulnerable edge cases. |
| matrix-appservice-irc is a Node.js IRC bridge for the Matrix messaging protocol. The fix for GHSA-wm4w-7h2q-3pf7 / CVE-2024-32000 included in matrix-appservice-irc 2.0.0 relied on the Matrix homeserver-provided timestamp to determine whether a user has access to the event they're replying to when determining whether or not to include a truncated version of the original event in the IRC message. Since this value is controlled by external entities, a malicious Matrix homeserver joined to a room in which a matrix-appservice-irc bridge instance (before version 2.0.1) is present can fabricate the timestamp with the intent of tricking the bridge into leaking room messages the homeserver should not have access to. matrix-appservice-irc 2.0.1 drops the reliance on `origin_server_ts` when determining whether or not an event should be visible to a user, instead tracking the event timestamps internally. As a workaround, it's possible to limit the amount of information leaked by setting a reply template that doesn't contain the original message. |
| golang-jwt is a Go implementation of JSON Web Tokens. Unclear documentation of the error behavior in `ParseWithClaims` can lead to situation where users are potentially not checking errors in the way they should be. Especially, if a token is both expired and invalid, the errors returned by `ParseWithClaims` return both error codes. If users only check for the `jwt.ErrTokenExpired ` using `error.Is`, they will ignore the embedded `jwt.ErrTokenSignatureInvalid` and thus potentially accept invalid tokens. A fix has been back-ported with the error handling logic from the `v5` branch to the `v4` branch. In this logic, the `ParseWithClaims` function will immediately return in "dangerous" situations (e.g., an invalid signature), limiting the combined errors only to situations where the signature is valid, but further validation failed (e.g., if the signature is valid, but is expired AND has the wrong audience). This fix is part of the 4.5.1 release. We are aware that this changes the behaviour of an established function and is not 100 % backwards compatible, so updating to 4.5.1 might break your code. In case you cannot update to 4.5.0, please make sure that you are properly checking for all errors ("dangerous" ones first), so that you are not running in the case detailed above. |
| A vulnerability has been identified in SIPROTEC 4 6MD61 (All versions), SIPROTEC 4 6MD63 (All versions), SIPROTEC 4 6MD66 (All versions), SIPROTEC 4 6MD665 (All versions), SIPROTEC 4 7SA522 (All versions), SIPROTEC 4 7SA6 (All versions < V4.78), SIPROTEC 4 7SD5 (All versions < V4.78), SIPROTEC 4 7SD610 (All versions < V4.78), SIPROTEC 4 7SJ61 (All versions), SIPROTEC 4 7SJ62 (All versions), SIPROTEC 4 7SJ63 (All versions), SIPROTEC 4 7SJ64 (All versions), SIPROTEC 4 7SJ66 (All versions), SIPROTEC 4 7SS52 (All versions), SIPROTEC 4 7ST6 (All versions), SIPROTEC 4 7UM61 (All versions), SIPROTEC 4 7UM62 (All versions), SIPROTEC 4 7UT612 (All versions), SIPROTEC 4 7UT613 (All versions), SIPROTEC 4 7UT63 (All versions), SIPROTEC 4 7VE6 (All versions), SIPROTEC 4 7VK61 (All versions), SIPROTEC 4 7VU683 (All versions), SIPROTEC 4 Compact 7RW80 (All versions), SIPROTEC 4 Compact 7SD80 (All versions), SIPROTEC 4 Compact 7SJ80 (All versions), SIPROTEC 4 Compact 7SJ81 (All versions), SIPROTEC 4 Compact 7SK80 (All versions), SIPROTEC 4 Compact 7SK81 (All versions). Affected devices do not properly handle interrupted operations of file transfer. This could allow an unauthenticated remote attacker to cause a denial of service condition. To restore normal operations, the devices need to be restarted. |
| https://www.gnu.org/software/binutils/ nm >=2.43 is affected by: Incorrect Access Control. The type of exploitation is: local. The component is: `nm --without-symbol-version` function. |
| A problem with a detection mechanism in the Palo Alto Networks Cortex XDR agent on Windows devices enables a user with Windows non-administrative privileges to disable the agent. This vulnerability can also be leveraged by malware to disable the Cortex XDR agent and then perform malicious activity. |
| A Denial of Service (DoS) vulnerability in Palo Alto Networks PAN-OS software causes the firewall to unexpectedly reboot when processing a specially crafted LLDP frame sent by an unauthenticated adjacent attacker. Repeated attempts to initiate this condition causes the firewall to enter maintenance mode.
This issue does not apply to Cloud NGFWs or Prisma Access software. |
| A denial-of-service (DoS) vulnerability in the Simple Certificate Enrollment Protocol (SCEP) authentication feature of Palo Alto Networks PAN-OS® software enables an unauthenticated attacker to initiate system reboots using a maliciously crafted packet. Repeated attempts to initiate a reboot causes the firewall to enter maintenance mode.
Cloud NGFW is not affected by this vulnerability. Prisma® Access software is proactively patched and protected from this issue. |
| An improper exception check in Palo Alto Networks Prisma Access Browser allows a low privileged user to prevent Prisma Access Browser from applying it's Policy Rules. This enables the user to use Prisma Access Browser without any restrictions. |
| A vulnerability in the Pix-Link LV-WR21Q router's language module allows remote attackers to trigger a denial of service (DoS) by sending a specially crafted HTTP POST request containing non-existing language parameter. This renders the server unable to serve correct lang.js file, which causes administrator panel to not work, resulting in DoS until the language settings is reverted to a correct value. The Denial of Service affects only the administrator panel and does not affect other router functionalities.
The vendor was notified early about this vulnerability, but didn't respond with the details of vulnerability or vulnerable version range. Only version V108_108 was tested and confirmed as vulnerable, other versions were not tested and might also be vulnerable. |
| Improper conditions check for the Intel(R) Optane(TM) PMem management software before versions CR_MGMT_02.00.00.4052, CR_MGMT_03.00.00.0538 within Ring 3: User Applications may allow an escalation of privilege. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable [cvss_threat_loss_factor]. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires active user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Manifest offers users a one-file micro back end. Prior to version 4.9.2, Manifest employs a weak password hashing implementation that uses SHA3 without a salt. This exposes user passwords to a higher risk of being cracked if an attacker gains access to the database. Without the use of a salt, identical passwords across multiple users will result in the same hash, making it easier for attackers to identify and exploit patterns, thereby accelerating the cracking process. Version 4.9.2 fixes the issue. |
| Improper conditions check in some firmware for some Intel(R) NPU Drivers within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A vulnerability has been identified in RUGGEDCOM i800 (All versions), RUGGEDCOM i801 (All versions), RUGGEDCOM i802 (All versions), RUGGEDCOM i803 (All versions), RUGGEDCOM M2100 (All versions), RUGGEDCOM M2200 (All versions), RUGGEDCOM M969 (All versions), RUGGEDCOM RMC30 (All versions), RUGGEDCOM RMC8388 V4.X (All versions), RUGGEDCOM RMC8388 V5.X (All versions < V5.10.0), RUGGEDCOM RP110 (All versions), RUGGEDCOM RS1600 (All versions), RUGGEDCOM RS1600F (All versions), RUGGEDCOM RS1600T (All versions), RUGGEDCOM RS400 (All versions), RUGGEDCOM RS401 (All versions), RUGGEDCOM RS416 (All versions), RUGGEDCOM RS416P (All versions), RUGGEDCOM RS416Pv2 V4.X (All versions), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.10.0), RUGGEDCOM RS416v2 V4.X (All versions), RUGGEDCOM RS416v2 V5.X (All versions < V5.10.0), RUGGEDCOM RS8000 (All versions), RUGGEDCOM RS8000A (All versions), RUGGEDCOM RS8000H (All versions), RUGGEDCOM RS8000T (All versions), RUGGEDCOM RS900 (All versions), RUGGEDCOM RS900 (32M) V4.X (All versions), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900G (All versions), RUGGEDCOM RS900G (32M) V4.X (All versions), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900GP (All versions), RUGGEDCOM RS900L (All versions), RUGGEDCOM RS900M-GETS-C01 (All versions), RUGGEDCOM RS900M-GETS-XX (All versions), RUGGEDCOM RS900M-STND-C01 (All versions), RUGGEDCOM RS900M-STND-XX (All versions), RUGGEDCOM RS900W (All versions), RUGGEDCOM RS910 (All versions), RUGGEDCOM RS910L (All versions), RUGGEDCOM RS910W (All versions), RUGGEDCOM RS920L (All versions), RUGGEDCOM RS920W (All versions), RUGGEDCOM RS930L (All versions), RUGGEDCOM RS930W (All versions), RUGGEDCOM RS940G (All versions), RUGGEDCOM RS969 (All versions), RUGGEDCOM RSG2100 (All versions), RUGGEDCOM RSG2100 (32M) V4.X (All versions), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100P (All versions), RUGGEDCOM RSG2100P (32M) V4.X (All versions), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2200 (All versions), RUGGEDCOM RSG2288 V4.X (All versions), RUGGEDCOM RSG2288 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300 V4.X (All versions), RUGGEDCOM RSG2300 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300P V4.X (All versions), RUGGEDCOM RSG2300P V5.X (All versions < V5.10.0), RUGGEDCOM RSG2488 V4.X (All versions), RUGGEDCOM RSG2488 V5.X (All versions < V5.10.0), RUGGEDCOM RSG907R (All versions < V5.10.0), RUGGEDCOM RSG908C (All versions < V5.10.0), RUGGEDCOM RSG909R (All versions < V5.10.0), RUGGEDCOM RSG910C (All versions < V5.10.0), RUGGEDCOM RSG920P V4.X (All versions), RUGGEDCOM RSG920P V5.X (All versions < V5.10.0), RUGGEDCOM RSL910 (All versions < V5.10.0), RUGGEDCOM RST2228 (All versions < V5.10.0), RUGGEDCOM RST2228P (All versions < V5.10.0), RUGGEDCOM RST916C (All versions < V5.10.0), RUGGEDCOM RST916P (All versions < V5.10.0). Affected devices do not properly handle malformed TLS handshake messages. This could allow an attacker with network access to the webserver to cause a denial of service resulting in the web server and the device to crash. |
| VMware vCenter contains a denial-of-service vulnerability. A malicious actor who is authenticated through vCenter and has permission to perform API calls for guest OS customisation may trigger this vulnerability to create a denial-of-service condition. |
