| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability exists that could
cause a potential arbitrary code execution after a successful Man-In-The Middle attack followed by sending a
crafted Modbus function call to tamper with memory area involved in the authentication process. |
| Improper buffer restrictions for some Intel(R) Xeon(R) Processor firmware with SGX enabled may allow a privileged user to potentially enable escalation of privilege via local access. |
| A vulnerability in the ipsecmgr process of Cisco ASR 5000 Series Software (StarOS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition.
This vulnerability is due to insufficient validation of incoming Internet Key Exchange Version 2 (IKEv2) packets. An attacker could exploit this vulnerability by sending specifically malformed IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause the ipsecmgr process to restart, which would disrupt ongoing IKE negotiations and result in a temporary DoS condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| The ventilator's microcontroller lacks memory protection. An attacker could connect to the internal JTAG interface and read or write to flash memory using an off-the-shelf debugging tool, which could disrupt the function of the device and/or cause unauthorized information disclosure. |
| On the exos 9300 server, a SOAP API is reachable on port 8002. This API does not require any authentication prior to sending requests. Therefore, network access to the exos server allows e.g. the creation of arbitrary access log events as well as querying the 2FA PINs associated with the enrolled chip cards. |
| The exos 9300 application can be used to configure Access Managers (e.g. 92xx, 9230 and 9290). The configuration is done in a graphical user interface on the dormakaba exos server. As soon as the save button is clicked in exos 9300, the whole configuration is sent to the selected Access Manager via SOAP. The SOAP request is sent without any prior authentication or authorization by default. Though authentication and authorization can be configured using IPsec for 92xx-K5 devices and mTLS for 92xx-K7 devices, it is not enabled by default and must therefore be activated with additional steps.
This insecure default allows an attacker with network level access to completely control the whole environment. An attacker is for example easily able to conduct the following tasks without prior authentication:
- Re-configure Access Managers (e.g. remove alarming system requirements)
- Freely re-configure the inputs and outputs
- Open all connected doors permanently
- Open all doors for a defined time interval
- Change the admin password
- and many more
Network level access can be gained due to an insufficient network segmentation as well as missing LAN firewalls. Devices with an insecure configuration have been identified to be directly exposed to the internet. |
| An insecure deserialization vulnerability exists in the BentoML framework, allowing remote code execution (RCE) by sending a specially crafted POST request. By exploiting this vulnerability, attackers can execute arbitrary commands on the server hosting the BentoML application. The vulnerability is triggered when a serialized object, crafted to execute OS commands upon deserialization, is sent to any valid BentoML endpoint. This issue poses a significant security risk, enabling attackers to compromise the server and potentially gain unauthorized access or control. |
| An issue in dc2niix before v.1.0.20240202 allows a local attacker to execute arbitrary code via the generated file name is not properly escaped and injected into a system call when certain types of compression are used. |
| Incorrect boundary conditions in the Audio/Video component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9. |
| Incorrect boundary conditions in the Graphics: Text component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9. |
| Incorrect boundary conditions in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 149.0.2 and Thunderbird 149.0.2. |
| Improper Encoding or Escaping of Output vulnerability in the JsonAccessLogValve component of Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.20, from 10.1.0-M1 through 10.1.53, from 9.0.40 through 9.0.116.
Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117 , which fix the issue. |
| A buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking. Note that this occurs after certificate chain signature verification and requires either a CA to have signed a malicious certificate or for an application to continue certificate verification despite failure to construct a path to a trusted issuer. An attacker can craft a malicious email address in a certificate to overflow an arbitrary number of bytes containing the `.' character (decimal 46) on the stack. This buffer overflow could result in a crash (causing a denial of service). In a TLS client, this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the server requests client authentication and a malicious client connects.
|
| A buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking. Note that this occurs after certificate chain signature verification and requires either a CA to have signed the malicious certificate or for the application to continue certificate verification despite failure to construct a path to a trusted issuer. An attacker can craft a malicious email address to overflow four attacker-controlled bytes on the stack. This buffer overflow could result in a crash (causing a denial of service) or potentially remote code execution. Many platforms implement stack overflow protections which would mitigate against the risk of remote code execution. The risk may be further mitigated based on stack layout for any given platform/compiler. Pre-announcements of CVE-2022-3602 described this issue as CRITICAL. Further analysis based on some of the mitigating factors described above have led this to be downgraded to HIGH. Users are still encouraged to upgrade to a new version as soon as possible. In a TLS client, this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the server requests client authentication and a malicious client connects. Fixed in OpenSSL 3.0.7 (Affected 3.0.0,3.0.1,3.0.2,3.0.3,3.0.4,3.0.5,3.0.6). |
| A vulnerability was detected in D-Link DIR-645 1.01/1.02/1.03. Impacted is the function hedwigcgi_main of the file /cgi-bin/hedwig.cgi. The manipulation results in stack-based buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was detected in Totolink A800R 4.1.2cu.5137_B20200730. This impacts the function setAppEasyWizardConfig in the library /lib/cste_modules/app.so. The manipulation of the argument apcliSsid results in buffer overflow. The attack can be executed remotely. The exploit is now public and may be used. |
| ewe is a Gleam web server. Prior to version 3.0.6, the encode_headers function in src/ewe/internal/encoder.gleam directly interpolates response header keys and values into raw HTTP bytes without validating or stripping CRLF (\r\n) sequences. An application that passes user-controlled data into response headers (e.g., setting a Location redirect header from a request parameter) allows an attacker to inject arbitrary HTTP response content, leading to response splitting, cache poisoning, and possible cross-site scripting. Notably, ewe does validate CRLF in incoming request headers via validate_field_value() in the HTTP/1.1 parser — but provides no equivalent protection for outgoing response headers in the encoder. This issue has been patched in version 3.0.6. |
| ChurchCRM is an open-source church management system. Prior to 7.1.0, a stored cross-site scripting vulnerability exists in PersonView.php due to incorrect use of sanitizeText() as an output sanitizer for HTML attribute context. The function only strips HTML tags, it does not escape quote characters allowing an attacker to break out of the href attribute and inject arbitrary JavaScript event handlers. Any authenticated user with the EditRecords role can store the payload in a person's Facebook field. The XSS fires against any user who views that person's profile page, including administrators, enabling session hijacking and full account takeover. This vulnerability is fixed in 7.1.0. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 38.8.6, 39.8.3, 40.8.3, and 41.0.3, apps that register custom protocol handlers via protocol.handle() / protocol.registerSchemesAsPrivileged() or modify response headers via webRequest.onHeadersReceived may be vulnerable to HTTP response header injection if attacker-controlled input is reflected into a response header name or value. An attacker who can influence a header value may be able to inject additional response headers, affecting cookies, content security policy, or cross-origin access controls. Apps that do not reflect external input into response headers are not affected. This issue has been patched in versions 38.8.6, 39.8.3, 40.8.3, and 41.0.3. |
| Budibase is an open-source low-code platform. Prior to version 3.33.4, a server-side request forgery (SSRF) vulnerability exists in Budibase's REST datasource connector. The platform's SSRF protection mechanism (IP blacklist) is rendered completely ineffective because the BLACKLIST_IPS environment variable is not set by default in any of the official deployment configurations. When this variable is empty, the blacklist function unconditionally returns false, allowing all requests through without restriction. This issue has been patched in version 3.33.4. |
