| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: use parsed transport offset in SCTP state lookup
set_sctp_state() reads the SCTP chunk header again in order to drive the
IPVS SCTP state table. For IPv6 it computes the offset with
sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from
ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped
extension headers and found the real transport header.
This makes the state machine read from the wrong offset for IPv6 SCTP
packets that carry extension headers. For example, an INIT packet with an
8-byte destination options header can be scheduled correctly by
sctp_conn_schedule(), but set_sctp_state() reads the first byte of the
SCTP verification tag as a DATA chunk type. The connection then moves
from NONE to ESTABLISHED instead of INIT1, gets the longer established
timeout, and updates the active/inactive destination counters
incorrectly. This happens even though the SCTP handshake has not
completed.
Use the parsed transport offset passed down from ip_vs_set_state() for
the SCTP chunk-header lookup. For IPv4 and IPv6 packets without
extension headers this preserves the existing offset. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Validate the packet length reported by the NIC
Validate the packet length reported in the RX CQE before passing it
to skb processing. The CQE is supplied by the NIC device and should
not be blindly trusted. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix out-of-bounds read in ims_pcu_irq() debug logging
The debug logging in ims_pcu_irq() unconditionally prints data from
pcu->urb_in_buf. However, if the interrupt fired for pcu->urb_ctrl, the
actual data resides in pcu->urb_ctrl_buf. If urb->actual_length for the
control URB exceeds pcu->max_in_size, this leads to an out-of-bounds
read.
Fix this by printing from the correct buffer associated with the URB. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: reject frames without a transaction header
hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0]
before checking that the L2CAP SDU contains a transaction header. A
connected HIDP peer can send an empty basic-mode SDU and make both paths
use an uninitialized byte from skb tailroom.
KMSAN reports the use in hidp_session_run(), with the uninitialized value
originating in __alloc_skb() through vhci_write(). The control path
produces two reports and the interrupt path produces one.
The byte can also be controlled by a malformed lower-layer packet. If an
HCI ACL packet contains an L2CAP PDU with a declared zero-length payload
followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to
the declared PDU length before dispatch. The current HIDP path nevertheless
consumes the extra byte as HIDP_TRANS_HID_CONTROL |
HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this
change, the same packet is discarded and a subsequent feature report
request succeeds.
Pull the transaction header with skb_pull_data() and discard frames that
do not contain it. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Reject firmware log with size smaller than header
fw_log_from_bo() validates the tracing buffer header_size and that the
log fits within the BO, but never checks that log->size is at least
log->header_size. fw_log_print_buffer() then computes:
u32 data_size = log->size - log->header_size;
which underflows to a near-U32_MAX value when firmware reports a log whose
size is smaller than its header. That huge data_size defeats the
log_start/log_end bounds clamps added by commit dd1311bcf0e6 ("accel/ivpu:
Add bounds checks for firmware log indices"), so fw_log_print_lines() reads
far past the small real data region of the BO. A size of 0 also makes
fw_log_from_bo() advance the offset by 0, causing the callers to loop
forever on the same header.
Reject logs whose size is smaller than the header (which also rejects
size == 0). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate EHT MLE before MLD ID read
cfg80211_gen_new_ie() copies ML probe response elements from
the parent frame when the parent EHT multi-link element has an
MLD ID matching the nontransmitted BSSID index.
The code only checked that the extension element had more than
one byte before calling ieee80211_mle_get_mld_id(). That helper
assumes a BASIC MLE with enough common info and documents that
callers must first use ieee80211_mle_type_ok().
Attack chain:
malicious AP sends a short EHT MLE in an MBSSID beacon.
cfg80211_inform_bss_frame_data() stores the copied IE buffer.
cfg80211_parse_mbssid_data() builds the nontransmitted BSS IE.
cfg80211_gen_new_ie() sees the EHT MLE in the parent frame.
ieee80211_mle_get_mld_id() then reads past the IE boundary.
Validate the MLE type and size before reading the MLD ID. This
matches the contract required by the MLE helper and rejects the
short element before any internal MLE fields are accessed. |
| A vulnerability was detected in EricLBuehler Mistral.rs up to 0.8.22. Affected by this issue is the function convert_gguf_to_hf_tokenizer of the file mistralrs-core/src/gguf/gguf_tokenizer.rs of the component GGUF Tokenizer. The manipulation of the argument eos_token_id/bos_token_id/unknown_token_id results in out-of-bounds read. The attack can be executed remotely. The exploit is now public and may be used. Upgrading to version 0.8.23 can resolve this issue. The patch is identified as cd5297e2ea5cb27c790bdcf2f3c2f1064a81d55e. Upgrading the affected component is recommended. |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in Safari 26.5.2, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.5.2 and iPadOS 26.5.2, macOS Tahoe 26.5.2, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected process crash. |
| An out-of-bounds read issue was addressed with improved input validation. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6. A remote attacker may cause an unexpected app termination. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to cause unexpected system termination. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to cause unexpected system termination. |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in Safari 26.6, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8. Processing a maliciously crafted asset catalog may result in disclosure of process memory. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to cause unexpected system termination. |
| In the Linux kernel, the following vulnerability has been resolved:
dm era: fix out-of-bounds memory access for non-zero start sector
dm-era tracks writes in target-relative blocks, but era_map() calculates
the writeset block before applying the target offset. Tables with a
non-zero start sector can therefore pass an absolute mapped-device block
to metadata_current_marked().
If the absolute block is beyond the current writeset size,
writeset_marked() tests past the end of the in-core bitset. KASAN reports
this as a vmalloc-out-of-bounds access.
Apply the target offset before calculating the era block so writeset
lookups use the target-relative block number. |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in Safari 26.5.2, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.5.2 and iPadOS 26.5.2, macOS Tahoe 26.5.2, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to cause a denial-of-service. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: ensure minimal ethernet header on TX
As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have
at least eth header len bytes"), it is possible by for a local user with
eBPF TC hook access to attach a tc filter which truncates the packet and
redirects to an batadv interface. But the code assumes that at least
ETH_HLEN bytes are available and thus might read outside of the available
buffer.
The batadv_interface_tx() must therefore always check itself if enough data
is available for the ethernet header and don't rely on min_header_len. |
| In the Linux kernel, the following vulnerability has been resolved:
macsec: don't read an unset MAC header in macsec_encrypt()
macsec_encrypt() reads the Ethernet header via eth_hdr(skb)
(skb->head + skb->mac_header) to memmove() the 12 source/destination MAC
bytes forward and make room for the SecTAG.
On the AF_PACKET SOCK_RAW + PACKET_QDISC_BYPASS transmit path the skb
reaches the macsec ndo_start_xmit() with the MAC header unset, so
eth_hdr(skb) resolves to skb->head + (u16)~0 and the read is out of
bounds: a 12-byte heap over-read that is also emitted on the wire as the
frame's outer source/destination MAC. KASAN reports a slab-out-of-bounds
read in macsec_start_xmit() on 6.0; on current mainline a CONFIG_DEBUG_NET
build flags it as an unset mac header in skb_mac_header().
On the TX path the L2 header is at skb->data, so use skb_eth_hdr(), added
by commit 96cc4b69581d ("macvlan: do not assume mac_header is set in
macvlan_broadcast()") for exactly this purpose. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Bound PR-OUT TransportID parsing to the received buffer
core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move()
hand the raw PERSISTENT RESERVE OUT parameter buffer to
target_parse_pr_out_transport_id() without telling it how many bytes are
valid. For an iSCSI TransportID (FORMAT CODE 01b),
iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with
an unbounded strstr() (and on the error path prints the name with a further
unbounded "%s"). An initiator can submit a TransportID whose iSCSI name
contains neither a ",i,0x" substring nor a NUL terminator, filling the
parameter list to its end, so the scan runs off the end of the buffer.
When the parameter list spans more than one page the buffer is a multi-page
vmap (transport_kmap_data_sg()), so the over-read walks into the trailing
vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It
is reachable by any fabric that delivers a PR OUT to a device exported
through an iSCSI TPG, including a guest via vhost-scsi.
Pass the number of received bytes down to the parser and validate the iSCSI
TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up
front: reject it if it is below the spc4r17 minimum or larger than the
received buffer, then bound the separator search, the ISID walk and the
name copy by that length. This is the length check the callers already
perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len
against tpdl, core_scsi3_emulate_register_and_move() validates it against
data_length), moved ahead of the scan. Also drop the unbounded "%s" of the
unterminated name.
Add per-format explicit name-length checks before copying into i_str,
rather than silently truncating with min_t: for FORMAT CODE 00b reject if
the descriptor body (tid_len - 4 bytes) cannot fit in
i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion
(from &buf[4] up to the separator) cannot fit. Both checks make the bounds
intent explicit at each format branch.
While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x"
separator sits at the very end of the descriptor: that leaves an empty ISID
and points the returned port nexus pointer at buf + tid_len, one past the
descriptor, which the registration code (__core_scsi3_locate_pr_reg(),
__core_scsi3_alloc_registration()) then dereferences as the ISID string --
the same over-read of the parameter buffer for a malformed descriptor. |
