| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/pt: Fix stop/start with no update
If pt_event_stop() is called without PERF_EF_UPDATE flag, then
perf_aux_output_end() is not called. A subsequent call to pt_event_start()
will call perf_aux_output_begin() again which violates the rule against
nesting and triggers a WARNING in perf_aux_output_begin().
Originally, pt_event_stop() was never called without PERF_EF_UPDATE,
because the only code paths to do so are from event overflow, and Intel PT
does not do that.
However the introduction of group throttling by commit 9734e25fbf5ae
("perf: Fix the throttle logic for a group") meant that an Intel PT event
could be throttled if it was part of a group. Throttling calls PMU
->stop() / ->start() callbacks without flags.
An example is when AUX area sampling is used. The following commands
hit the issue:
echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate
perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \
-- bash -c 'for i in `seq 1 100000` ; do true ; done'
Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and
perf_aux_output_end() are balanced. A cleared PERF_HES_UPTODATE bit
indicates that an AUX output context is still open.
Amend pt_event_start() / pt_event_stop() accordingly so that begin/end
stay balanced:
- In non-snapshot mode, stop() always closes the buffer (the buffer may
have run out of space, and that accounting is done by the update), so
a following start() opens a fresh one as before.
- In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the
buffer open so that pt_event_snapshot_aux() can still copy from it,
and start() then only re-enables tracing instead of calling
perf_aux_output_begin() again.
Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set
(as is required by the documentation), so a final call to
perf_aux_output_end() is assured. |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: Avoid warning when removing a device while its supplier is unbinding
During driver removal, the following warning can appear:
WARNING: CPU: 1 PID: 139 at drivers/base/core.c:1497 __device_links_no_driver+0xcc/0xfc
...
Call trace:
__device_links_no_driver+0xcc/0xfc (P)
device_links_driver_cleanup+0xa8/0xf0
device_release_driver_internal+0x208/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
driver_detach+0xa0/0x12c
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
pci_unregister_driver+0x20/0x9c
lan966x_pci_driver_exit+0x18/0xa90 [lan966x_pci]
This warning is triggered when a consumer is removed because the links
status of its supplier is not DL_DEV_DRIVER_BOUND and the link flag
DL_FLAG_SYNC_STATE_ONLY is not set.
The topology in terms of consumers/suppliers used was the following
(consumer ---> supplier):
i2c -----------> OIC ----> PCI device
| ^
| |
+---> pinctrl ---+
When the PCI device is removed, the OIC (interrupt controller) has to be
removed. In order to remove the OIC, pinctrl and i2c need to be removed
and to remove pinctrl, i2c need to be removed. The removal order is:
1) i2c
2) pinctrl
3) OIC
4) PCI device
In details, the removal sequence is the following (with 0000:01:00.0 the
PCI device):
driver_detach: call device_release_driver_internal(0000:01:00.0)...
device_links_busy(0000:01:00.0):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(0000:01:00.0):
0000:01:00.0--oic link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(oic)...
device_links_busy(oic):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(oic):
oic--pinctrl link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(pinctrl)...
device_links_busy(pinctrl):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(pinctrl):
pinctrl--i2c link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(i2c)...
device_links_busy(i2c): links->status = DL_DEV_UNBINDING
__device_links_no_driver(i2c)...
pinctrl--i2c link->status is DL_STATE_SUPPLIER_UNBIND
oic--i2c link->status is DL_STATE_ACTIVE
oic--i2c link->supplier->links.status is DL_DEV_UNBINDING
The warning is triggered by the i2c removal because the OIC (supplier)
links status is not DL_DEV_DRIVER_BOUND. Its links status is indeed set
to DL_DEV_UNBINDING.
It is perfectly legit to have the links status set to DL_DEV_UNBINDING
in that case. Indeed we had started to unbind the OIC which triggered
the consumer unbinding and didn't finish yet when the i2c is unbound.
Avoid the warning when the supplier links status is set to
DL_DEV_UNBINDING and thus support this removal sequence without any
warnings. |
| iControl is affected by a Missing Secure Attribute vulnerability, which could allow an attacker to intercept cookies transmitted over unencrypted HTTP connections, enabling the unauthorized extraction of sensitive information such as session identifiers. |
| iControl is affected by a Session Timeout vulnerability, which could allow an attacker to exploit an unattended or abandoned active session, enabling unauthorized access to the application and the ability to perform actions on behalf of the victim. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/ftrace: Fix WARNING in __unregister_ftrace_function
perf_ftrace_function_unregister() unconditionally calls
unregister_ftrace_function() without checking whether the ftrace_ops
was ever successfully registered. This triggers a WARN_ON in
__unregister_ftrace_function() when the ops doesn't have
FTRACE_OPS_FL_ENABLED set.
This can happen during perf_event_alloc() error cleanup when
perf_trace_destroy() is called via __free_event() on an event whose
ftrace_ops registration failed or was already torn down by
perf_try_init_event()'s err_destroy path.
The call path is:
perf_event_alloc() error cleanup
-> __free_event()
-> event->destroy() [tp_perf_event_destroy]
-> perf_trace_destroy()
-> perf_trace_event_close()
-> TRACE_REG_PERF_CLOSE
-> perf_ftrace_function_unregister()
-> unregister_ftrace_function()
-> __unregister_ftrace_function()
-> WARN_ON(!(ops->flags & FTRACE_OPS_FL_ENABLED))
Fix this by checking FTRACE_OPS_FL_ENABLED before attempting to
unregister. If the ops is not enabled, just free the filter and
return success. |
| An XML parser used by Kiteworks Email Protection Gateway did not restrict external entity references. Where an optional, non-default message-processing feature is enabled, a remote and unauthenticated sender could potentially use a crafted message to read files accessible to the gateway service account, including cryptographic key material and credentials, and have them sent to a destination they control. |
| FileRise before version 3.28.0 contains a privilege escalation vulnerability that allows authenticated low-privilege attackers to gain unauthorized read and write access by exploiting improper session isolation between the WebDAV interface and the web application session context. Attackers can combine valid Basic-Auth credentials with an active admin PHPSESSID cookie to bypass authorization boundaries, as the WebDAV layer incorrectly inherits elevated privileges from an ambient web session rather than enforcing independent stateless authentication per RFC 4918. |
| Datasets through 5.00, fixed in commit ad2d853, contains a symlink-following vulnerability in Extractor.extract() that allows local attackers to write arbitrary files by pre-planting symlinks at predictable output paths. Attackers can redirect archive extraction to arbitrary filesystem locations in shared-cache environments, enabling overwrite of sensitive files and potential privilege escalation or code execution. |
| Externally controlled reference in DevTools in Google Chrome prior to 154.0.8037.57 allowed an adjacent attacker leveraging social engineering to bypass system access restrictions via crafted network traffic. (Chromium security severity: Medium) |
| Ghost versions 6.20.0 before 6.57.1 contain a session handling vulnerability that allows authenticated staff users to log in as any other staff user with only the password, bypassing two-factor authentication. Attackers with valid staff credentials can exploit improper session management to impersonate other staff members and gain unauthorized access to administrative functions. |
| Ghost versions from 3.10.0 before 6.34.0 fail to fully invalidate all sessions after a password change. Attackers with a stolen session cookie can maintain access to user accounts even after the associated user changes their password. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Move representor vnic reporter to eswitch devlink port
The representor vnic devlink health reporter is created and destroyed
along the representor netdev (un)load path, which is not serialized by
the devlink instance lock. Destroying the reporter from there triggers
a devl_assert_locked() splat on driver unbind:
WARNING: net/devlink/core.c:259 at devl_assert_locked+0x54/0x70, CPU#2: bash/3758
Modules linked in: mlx5_vdpa vringh vdpa mlx5_ib mlx5_fwctl mlx5_core ...
CPU: 2 UID: 0 PID: 3758 Comm: bash Tainted: G W 6.19.0+ #1 PREEMPT
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), ...
RIP: 0010:devl_assert_locked+0x54/0x70
Call Trace:
<TASK>
devl_health_reporter_destroy+0x3a/0x1b0
mlx5e_vport_rep_unload+0x12d/0x2b0 [mlx5_core]
mlx5_eswitch_unregister_vport_reps+0x1b8/0x220 [mlx5_core]
? __esw_offloads_unload_rep+0x190/0x190 [mlx5_core]
? kernfs_remove_by_name_ns+0xc3/0xf0
device_release_driver_internal+0x3b2/0x560
unbind_store+0xce/0xf0
Move the reporter's lifecycle to the eswitch devlink port (un)register
paths, which are already serialized by the devlink instance lock, and
store the handle on mlx5_devlink_port. Use the port's mlx5_vport as the
reporter priv since the diagnose callback only needs a device handle and
a vport number, and mlx5_vport carries both and is initialized before
any representor driver probes. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix transaction overflow during writeback
Commit 95ad8ee45cdb ("ext4: correct the reserved credits for extent
conversion") was correct to note that we need to reserve enough credits
for all extents possibly underlying a large folio. However it was too
eager to reduce the number of reserved credits. Extent conversion may
not only need to touch several leaf extent blocks, it may also need to
split extents - for example a single large unwritten extent may need to
be split into many small written ones in case of sparse folio dirtying.
This can thus result not only in extent leaf modifications but also in a
need to allocate new extent tree nodes. As a result the reserved
transaction credits were not sufficient in some corner cases. Use
ext4_meta_trans_blocks() for correct upper bound credit estimate. |
| Pexip Infinity before 38.2, plus 39.0, 39.1, and 40.0, is affected by improper input validation in the media implementation that allows a remote attacker to trigger a software abort resulting in a denial of service |
| vLLM before 0.29.0 accepts user-controlled stop_token_ids on the OpenAI-compatible POST /v1/completions and POST /v1/chat/completions endpoints but validates only that the values are integers, not that each token id is within the model vocabulary/logits range. When min_tokens > 0, the stop token ids are used as logits indices to suppress stop tokens, so an out-of-range id reaches a CUDA indexing operation (index_put_) and triggers a device-side assertion. An authenticated API user can send a single malformed completion request that returns 500 Internal Server Error and puts EngineCore into a fatal state, causing subsequent requests to fail until the service is restarted (denial of service). |
| Pexip Infinity before 38.2, plus 39.0, 39.1 and 40.0, is affected by improper input validation in the media implementation which allows a remote attacker to trigger a software abort resulting in a denial of service. |
| Pexip Infinity before 41.1 is affected by improper input validation in the media implementation that allows a remote attacker to trigger a software abort resulting in a denial of service. |
| During query planning when reading the sort pattern in raw BSONObj form, in some places we don’t explicitly handle the meta expression case. This may lead to incorrect transformations leading to invariant failure. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject tail calls directly from callback frames
A tail call from a non-zero frame is modeled as a return from that frame.
The verifier makes R0 unknown and calls prepare_func_exit() for the taken
branch.
When the current frame is a synchronous callback, prepare_func_exit()
enforces the callback return-value contract and marks R0 precise. Since the
tail-call path synthesized R0 rather than deriving it from an instruction,
precision backtracking reaches the callback-calling instruction with R0
still requested and triggers the "callback unexpected regs" verifier bug.
A CAP_BPF task can therefore cause a WARN and an -EFAULT BPF_PROG_LOAD.
Tail calls reachable from callbacks are already rejected later by
check_max_stack_depth(). Reject a tail call made directly by a callback
before constructing the inconsistent return state, using the existing
diagnostic. Tail calls from ordinary subprograms keep their current
behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic
Take the following unprivileged program as an example:
r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */
...
14: r0 += r1 /* r1 is a bounded scalar */
15: r9 = r0
Loading it triggers a verifier warning from reg_bounds_sanity_check():
verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out
of sync with range bounds r64={.base=0x0, .size=0x0}
r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0)
What happens:
1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(), the new
offset is computed into dst_reg's var_off and 32/64-bit ranges.
2. Because pointer registers do not track 32-bit subregister bounds,
__mark_reg32_unbounded() first sets r32 to the full range; r32 is
re-derived from the offset at the end of the function by
reg_bounds_sync().
3. On the unprivileged path, sanitize_ptr_alu() is called and, via
sanitize_speculative_path() -> push_stack(), snapshots the current
register state and schedules the next instruction (insn 15) to be
verified directly as a speculative path.
4. That snapshot is taken between step 2 and the final reg_bounds_sync():
at this point dst_reg's var_off still holds the (const) original
offset while r32 has just been blanked to the full range, i.e. the two
are out of sync. When the speculative path later verifies insn 15
(r9 = r0), the inconsistent state reaches reg_bounds_sanity_check() and
trips the warning.
var_off and the 32-bit range must always be consistent. There are two
ways to keep the snapshot consistent:
1. sync var_off and r32 before the snapshot so they match, or
2. leave r32 at its original (already consistent) value and blank it
only after the snapshot.
The whole point of sanitize_ptr_alu() is to insert a harmless masking
sequence that keeps the access in bounds under speculation, so the state
it snapshots should faithfully represent that. Take approach 2: move
__mark_reg32_unbounded() to after sanitize_ptr_alu(), so the speculative
snapshot keeps the pointer's original, consistent r32. The non-speculative
path is unchanged: r32 is still blanked before the offset is applied and
re-derived by reg_bounds_sync(). |
