| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Loop with unreachable exit condition ('infinite loop') vulnerability in Apache Thrift c_glib bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| A vulnerability was detected in GraphicsMagick up to 1.3.47. Affected by this vulnerability is the function ExtractPostscript of the file coders/wpg.c of the component WPG File Handler. Performing a manipulation results in uncontrolled recursion. The attack may be initiated remotely. The patch is named 627b5b1b2fc2. It is suggested to install a patch to address this issue. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.18.1, a crafted PDF containing a partially malformed /FlateDecode stream with padded data can force pypdf/filters.py to use inefficient byte-by-byte decompression while the earlier recovery counter fails to advance for bytes that successfully decode, causing long runtimes and application unavailability. This is a residual issue after the malformed FlateDecode recovery fix. This issue is fixed in version 6.18.1. |
| Uncaught exception, Loop with unreachable exit condition ('infinite loop'), Integer underflow (wrap or wraparound) vulnerability in Apache Thrift D language bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| figlet.js is a FIG driver written in JavaScript that aims to implement the FIGfont specification. Prior to 1.11.3, text() and textSync() can enter an unbounded loop when whitespaceBreak is enabled and width is smaller than the rendered width of a single FIGlet character. Under these conditions, breakWord() cannot find a valid break point and returns without consuming a character, so generateFigTextLines() repeatedly processes the same input while consuming CPU and growing memory. The non-default option and attacker-controlled width must both reach an affected call. This issue is fixed in version 1.11.3. |
| Stack-based buffer overflow, Incorrect bitwise shift of integer vulnerability in Apache Thrift C++ THeaderProtocol.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Improper validation of specified quantity in input, Allocation of resources without limits or throttling, Excessive Iteration vulnerability in Apache Thrift PHP bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject Write/Reply chunks with segcount 0
A peer can send a Write or Reply chunk whose segcount field is zero.
xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero
passes the range check, and xdr_inline_decode(stream, 0) returns the
current (non-NULL) cursor without advancing. The function returns
true and pcl_alloc_write() then links a struct svc_rdma_chunk with
ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl.
An earlier patch in this series made pcl_for_each_segment() safe for
ch_segcount == 0, so this no longer drives the memory walk it used
to. Rejecting the malformed frame at the decode boundary is still
worthwhile as defense in depth: it keeps degenerate zero-segment
chunks off the parsed chunk lists entirely, so any future consumer
that walks ch_segments directly cannot observe one, and it makes the
zero-floor easy to backport to trees where the macro change is more
intrusive. RFC 8166 has no meaning for a Write/Reply chunk that
describes no remote buffer, so no legitimate client is affected.
xdr_check_reply_chunk() funnels Reply chunks through
xdr_check_write_chunk() and inherits the same rejection.
pcl_alloc_write() also links each chunk onto the parsed chunk list
before filling its segment array. If a future change weakens the
segcount-0 rejection, an incomplete chunk is visible to consumers
during the fill loop. Reorder so that list_add_tail() follows the
segment fill loop, ensuring only fully-populated chunks appear on
the list. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix handling of damaged volume in exfat_create_upcase_table()
When the size of the upcase table is set to zero in the dentry for any
reason(e.g. corrupted media or misbehaving device), an integer overflow
causes the module to loop indefinitely.
If the size of the upcase table is read zero, do not attempt to load the
table. Instead, fallback to loading the default upcase table. If the
size of the upcase table is zero or no upcase table is found, raise
exfat_fs_error() to mark the volume read-only. |
| iperf3 versions prior to 3.22 contains a denial of service vulnerability that allows unauthenticated remote attackers to crash-loop the server's UDP receive worker into an unrecoverable infinite loop by sending a single crafted control-channel parameter message followed by one 16-byte UDP datagram. Attackers can permanently pin the affected per-stream receive thread at approximately 100% CPU usage, rendering the server unusable until forcibly killed with SIGKILL, as the process does not respond to normal control-channel closure. |
| In JetBrains YouTrack before 2026.2.19422 doS attack was possible via crafted PSD attachments |
| `_nx_icmpv6_validate_options()` scans the option area with `while (length > 2)` (`common/src/nx_icmpv6_validate_options.c:79`). An area whose size leaves a one- or two-byte residue exits the loop with that tail unexamined; the residue is not negative, so the function returns `NX_SUCCESS`. Its zero-length rejection never sees those bytes.
Every consumer then re-walks the same area, reading a two-byte option header at the residue and subtracting `nx_icmpv6_option_length << 3` with no zero check and no remaining-length check. Three outcomes follow, selected by bytes the attacker controls.
**Zero length byte.** The walker subtracts zero and advances zero. All four handlers loop forever — `_nx_icmpv6_process_ra` (`nx_icmpv6_process_ra.c:245, :528`), `_nx_icmpv6_process_ns` (`:251, :329`), `_nx_icmpv6_process_na` (`:147, :156`) and `_nx_icmpv6_process_redirect` (`:247, :350`). The walk runs in the IP thread, which is the highest-priority thread and does not yield inside the loop, so the system stops until a watchdog reset and the frame can be replayed after each one.
**Non-zero length byte on a short residue.** The three unsigned counters underflow — `2 - 8` becomes `0xFFFFFFFA` — and the walk continues past the packet buffer, reading until it faults or meets a zero length byte and freezes. The Router Advertisement counter is signed and exits cleanly in this case.
**One-byte residue.** The walker reads a two-byte option header, over-reading one byte.
During a runaway walk, stray bytes parsing as a link-layer address option are copied into the neighbor cache (`nx_icmpv6_process_ns.c:280, :293`) and subsequently used as the destination MAC for frames to that neighbour, placing off-packet memory on the link. Confirmed by inspection, not reproduced. |
| Unbounded PPP IPCP Option Parsing Causes a Worker Stall and Out-of-bounds Read |
| Improper output encoding in DevTools in Google Chrome prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Improper Verification of Source of a Communication Channel in the ADS discovery of the Go implementation of Apache PLC4X (PLC4Go) allows an attacker able to send UDP datagrams to the discovering host to redirect subsequent connections to an arbitrary, attacker-chosen address. The discovery result's connection
address was derived from the AmsNetId claimed in the response body rather than from the datagram's actual source address. One spoofed discovery response can therefore insert an inventory entry pointing at any host, including hosts outside the local network, and an application that connects to discovered devices
will open its ADS session, including any configured route credentials, to that host.
Additionally, discovery listeners in both implementations can be disabled by a single malformed datagram:
- In PLC4Go ADS discovery, a short version block causes a panic that ends the listener for the rest of the discovery call, so legitimate devices answering afterwards are not reported.
- In PLC4J, the ADS and EtherNet/IP discoverers stop on an unhandled exception from a malformed response.
- The PLC4J Modbus discoverer can be made to spin indefinitely, consuming a CPU core, by a scanned host that sends a partial response.
Exploitation requires the application to invoke the discovery API, which is opt-in, and for the connection redirect, to act on the discovered items.
This issue affects Apache PLC4X: PLC4Go from 0.11.0 before 1.0.0; PLC4J ADS and Modbus drivers from 0.10.0 before 1.0.0; PLC4J EtherNet/IP driver from 0.11.0 before 1.0.0. PLC4Go is consumed as the Go module github.com/apache/plc4x/plc4go; versions refer to the corresponding Apache PLC4X releases.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. Version 1.0.0 derives the connection address from the datagram's source address and logs a warning when the claimed AmsNetId disagrees with it. |
| USB HID protocol dissector infinite loop and memory leak in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: Prevent double migration of device pages
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0
---truncated--- |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.1.2, a user with Knowledge Base editing rights for a category can embed a video widget in a published answer with a specially crafted value. When the answer is rendered, that value is inserted into the page's HTML without being escaped for its attribute context, allowing it to break out and inject additional HTML into the page. When another user who has permission to switch between user sessions views the affected answer, the injected HTML causes their browser to silently send a request to Zammad's session-switching endpoint using their own active credentials. This results in switching their session to an account chosen by the person who wrote the Knowledge Base answer. No action is required from the viewer beyond opening the published answer. This issue is fixed in version 7.1.2. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't spin forever on zero-length dirents when salvaging them
LOLLM noticed that xrep_dir_recover_data can spin forever if it
encounters an unused dirent that claims to have length zero. Fix that,
and prevent the same thing from happening with a zero-length entry. |
| urllib3 is an HTTP client library for Python. From 2.6.2 until 2.8.0, HTTPResponse.stream and HTTPResponse.read_chunked can enter an infinite loop because the Deflate decoder retains trailing bytes as unconsumed input after reaching end-of-stream and repeatedly decodes them without progress. The issue occurs when an untrusted server sends a chunked Deflate response whose decoded body exceeds a positive finite chunk size and whose encoded body has trailing bytes, specifically a response with Transfer-Encoding: chunked and Content-Encoding: deflate, content decoding enabled, and the positive finite amt=N streaming chunk size. The attack mechanism is that a malicious server returns a compressed chunked response with trailing bytes after the Deflate stream. The impact is excessive CPU usage and a request that does not complete, and network read timeouts do not interrupt the loop because no further socket read occurs. This issue is fixed in version 2.8.0. |
