| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Fix invalid dereferencing of indirect CCW data pointer
Fix invalid dereferencing of indirect CCW data pointer in
dasd_eckd_dump_sense() that leads to a kernel panic in error cases.
When using indirect addressing for DASD CCWs (IDAW) the CCW CDA pointer
does not contain the data address itself but a pointer to the IDAL.
This needs to be translated from physical to virtual as well before
using it.
This dereferencing is also used for dasd_page_cache and also fixed
although it is very unlikely that this code path ever gets used. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: always initialize cqe.result
The spec doesn't mandate that the first two double words (aka results)
for the command queue entry need to be set to 0 when they are not
used (not specified). Though, the target implemention returns 0 for TCP
and FC but not for RDMA.
Let's make RDMA behave the same and thus explicitly initializing the
result field. This prevents leaking any data from the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Add tx check to prevent skb leak
Below is a summary of how the driver stores a reference to an skb during
transmit:
tx_buff[free_map[consumer_index]]->skb = new_skb;
free_map[consumer_index] = IBMVNIC_INVALID_MAP;
consumer_index ++;
Where variable data looks like this:
free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3]
consumer_index^
tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null]
The driver has checks to ensure that free_map[consumer_index] pointed to
a valid index but there was no check to ensure that this index pointed
to an unused/null skb address. So, if, by some chance, our free_map and
tx_buff lists become out of sync then we were previously risking an
skb memory leak. This could then cause tcp congestion control to stop
sending packets, eventually leading to ETIMEDOUT.
Therefore, add a conditional to ensure that the skb address is null. If
not then warn the user (because this is still a bug that should be
patched) and free the old pointer to prevent memleak/tcp problems. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus cras
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: et8ek8: Don't strip remove function when driver is builtin
Using __exit for the remove function results in the remove callback
being discarded with CONFIG_VIDEO_ET8EK8=y. When such a device gets
unbound (e.g. using sysfs or hotplug), the driver is just removed
without the cleanup being performed. This results in resource leaks. Fix
it by compiling in the remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: drivers/media/i2c/et8ek8/et8ek8: section mismatch in reference: et8ek8_i2c_driver+0x10 (section: .data) -> et8ek8_remove (section: .exit.text) |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Modify the print level of CQE error
Too much print may lead to a panic in kernel. Change ibdev_err() to
ibdev_err_ratelimited(), and change the printing level of cqe dump
to debug level. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cma: Fix kmemleak in rdma_core observed during blktests nvme/rdma use siw
When running blktests nvme/rdma, the following kmemleak issue will appear.
kmemleak: Kernel memory leak detector initialized (mempool available:36041)
kmemleak: Automatic memory scanning thread started
kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 8 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 17 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
kmemleak: 4 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
unreferenced object 0xffff88855da53400 (size 192):
comm "rdma", pid 10630, jiffies 4296575922
hex dump (first 32 bytes):
37 00 00 00 00 00 00 00 c0 ff ff ff 1f 00 00 00 7...............
10 34 a5 5d 85 88 ff ff 10 34 a5 5d 85 88 ff ff .4.].....4.]....
backtrace (crc 47f66721):
[<ffffffff911251bd>] kmalloc_trace+0x30d/0x3b0
[<ffffffffc2640ff7>] alloc_gid_entry+0x47/0x380 [ib_core]
[<ffffffffc2642206>] add_modify_gid+0x166/0x930 [ib_core]
[<ffffffffc2643468>] ib_cache_update.part.0+0x6d8/0x910 [ib_core]
[<ffffffffc2644e1a>] ib_cache_setup_one+0x24a/0x350 [ib_core]
[<ffffffffc263949e>] ib_register_device+0x9e/0x3a0 [ib_core]
[<ffffffffc2a3d389>] 0xffffffffc2a3d389
[<ffffffffc2688cd8>] nldev_newlink+0x2b8/0x520 [ib_core]
[<ffffffffc2645fe3>] rdma_nl_rcv_msg+0x2c3/0x520 [ib_core]
[<ffffffffc264648c>]
rdma_nl_rcv_skb.constprop.0.isra.0+0x23c/0x3a0 [ib_core]
[<ffffffff9270e7b5>] netlink_unicast+0x445/0x710
[<ffffffff9270f1f1>] netlink_sendmsg+0x761/0xc40
[<ffffffff9249db29>] __sys_sendto+0x3a9/0x420
[<ffffffff9249dc8c>] __x64_sys_sendto+0xdc/0x1b0
[<ffffffff92db0ad3>] do_syscall_64+0x93/0x180
[<ffffffff92e00126>] entry_SYSCALL_64_after_hwframe+0x71/0x79
The root cause: rdma_put_gid_attr is not called when sgid_attr is set
to ERR_PTR(-ENODEV). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/cs_dsp_ctl: Use private_free for control cleanup
Use the control private_free callback to free the associated data
block. This ensures that the memory won't leak, whatever way the
control gets destroyed.
The original implementation didn't actually remove the ALSA
controls in hda_cs_dsp_control_remove(). It only freed the internal
tracking structure. This meant it was possible to remove/unload the
amp driver while leaving its ALSA controls still present in the
soundcard. Obviously attempting to access them could cause segfaults
or at least dereferencing stale pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix list corruption from reorder of WRITE ->lqueued
__blkcg_rstat_flush() can be run anytime, especially when blk_cgroup_bio_start
is being executed.
If WRITE of `->lqueued` is re-ordered with READ of 'bisc->lnode.next' in
the loop of __blkcg_rstat_flush(), `next_bisc` can be assigned with one
stat instance being added in blk_cgroup_bio_start(), then the local
list in __blkcg_rstat_flush() could be corrupted.
Fix the issue by adding one barrier. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix neighbour and rtable leak in smc_ib_find_route()
In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable
resolved by ip_route_output_flow() are not released or put before return.
It may cause the refcount leak, so fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
VMBus code could free decrypted pages if set_memory_encrypted()/decrypted()
fails. Leak the pages if this happens. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
In order to make sure callers of vmbus_establish_gpadl() and
vmbus_teardown_gpadl() don't return decrypted/shared pages to
allocators, add a field in struct vmbus_gpadl to keep track of the
decryption status of the buffers. This will allow the callers to
know if they should free or leak the pages. |
| In the Linux kernel, the following vulnerability has been resolved:
hv_netvsc: Don't free decrypted memory
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The netvsc driver could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the gpadl
to decide whether to free the memory. |
| In the Linux kernel, the following vulnerability has been resolved:
uio_hv_generic: Don't free decrypted memory
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The VMBus device UIO driver could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the gpadl
to decide whether to free the memory. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The VMBus ring buffer code could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the struct
vmbus_gpadl for the ring buffers to decide whether to free the memory. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: qcom: uefisecapp: Fix memory related IO errors and crashes
It turns out that while the QSEECOM APP_SEND command has specific fields
for request and response buffers, uefisecapp expects them both to be in
a single memory region. Failure to adhere to this has (so far) resulted
in either no response being written to the response buffer (causing an
EIO to be emitted down the line), the SCM call to fail with EINVAL
(i.e., directly from TZ/firmware), or the device to be hard-reset.
While this issue can be triggered deterministically, in the current form
it seems to happen rather sporadically (which is why it has gone
unnoticed during earlier testing). This is likely due to the two
kzalloc() calls (for request and response) being directly after each
other. Which means that those likely return consecutive regions most of
the time, especially when not much else is going on in the system.
Fix this by allocating a single memory region for both request and
response buffers, properly aligning both structs inside it. This
unfortunately also means that the qcom_scm_qseecom_app_send() interface
needs to be restructured, as it should no longer map the DMA regions
separately. Therefore, move the responsibility of DMA allocation (or
mapping) to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
bcachefs: Check for journal entries overruning end of sb clean section
Fix a missing bounds check in superblock validation.
Note that we don't yet have repair code for this case - repair code for
individual items is generally low priority, since the whole superblock
is checksummed, validated prior to write, and we have backups. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Fix Rx DMA datasize and skb_over_panic
mana_get_rxbuf_cfg() aligns the RX buffer's DMA datasize to be
multiple of 64. So a packet slightly bigger than mtu+14, say 1536,
can be received and cause skb_over_panic.
Sample dmesg:
[ 5325.237162] skbuff: skb_over_panic: text:ffffffffc043277a len:1536 put:1536 head:ff1100018b517000 data:ff1100018b517100 tail:0x700 end:0x6ea dev:<NULL>
[ 5325.243689] ------------[ cut here ]------------
[ 5325.245748] kernel BUG at net/core/skbuff.c:192!
[ 5325.247838] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 5325.258374] RIP: 0010:skb_panic+0x4f/0x60
[ 5325.302941] Call Trace:
[ 5325.304389] <IRQ>
[ 5325.315794] ? skb_panic+0x4f/0x60
[ 5325.317457] ? asm_exc_invalid_op+0x1f/0x30
[ 5325.319490] ? skb_panic+0x4f/0x60
[ 5325.321161] skb_put+0x4e/0x50
[ 5325.322670] mana_poll+0x6fa/0xb50 [mana]
[ 5325.324578] __napi_poll+0x33/0x1e0
[ 5325.326328] net_rx_action+0x12e/0x280
As discussed internally, this alignment is not necessary. To fix
this bug, remove it from the code. So oversized packets will be
marked as CQE_RX_TRUNCATED by NIC, and dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP
Jan Schunk reports that his small NFS servers suffer from memory
exhaustion after just a few days. A bisect shows that commit
e18e157bb5c8 ("SUNRPC: Send RPC message on TCP with a single
sock_sendmsg() call") is the first bad commit.
That commit assumed that sock_sendmsg() releases all the pages in
the underlying bio_vec array, but the reality is that it doesn't.
svc_xprt_release() releases the rqst's response pages, but the
record marker page fragment isn't one of those, so it is never
released.
This is a narrow fix that can be applied to stable kernels. A
more extensive fix is in the works. |
| In the Linux kernel, the following vulnerability has been resolved:
of: dynamic: Synchronize of_changeset_destroy() with the devlink removals
In the following sequence:
1) of_platform_depopulate()
2) of_overlay_remove()
During the step 1, devices are destroyed and devlinks are removed.
During the step 2, OF nodes are destroyed but
__of_changeset_entry_destroy() can raise warnings related to missing
of_node_put():
ERROR: memory leak, expected refcount 1 instead of 2 ...
Indeed, during the devlink removals performed at step 1, the removal
itself releasing the device (and the attached of_node) is done by a job
queued in a workqueue and so, it is done asynchronously with respect to
function calls.
When the warning is present, of_node_put() will be called but wrongly
too late from the workqueue job.
In order to be sure that any ongoing devlink removals are done before
the of_node destruction, synchronize the of_changeset_destroy() with the
devlink removals. |
