| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: do not mark the volume clean in sync_fs when errors were recorded
ntfs_put_super() and the remount-read-only path both clear the dirty bit
only when NVolErrors(vol) is false. ntfs_sync_fs() clears it
unconditionally, so any sync() on a volume that recorded an error marks
that volume clean. A volume without this set is then seen as not needing
recovery and it does not run one, so whatever went wrong is never repaired.
This change skips resetting the dirty bit when there are volume errors.
Reproduced on a volume whose $MFTMirr does not match $MFT, which sets the
error flag while leaving the mount read-write: after a write and a sync,
the on-disk volume flags read 0x0000 with this driver and 0x0001 with the
guard in place. |
| The Nickname profile can panic with an out-of-bounds slice error when transforming crafted input into a short destination buffer. |
| An OS command injection vulnerability exists in the time and zone management subsystem of Brocade Fabric OS versions before 9.2.2d and 10.0.0 through 10.0.0a1. When updating system timezone settings via the REST API or configuration download routines, the system fails to sanitize input values before processing them in underlying shell execution routines. An authenticated user with low-privilege administrative access can exploit this vulnerability by submitting a crafted timezone string containing shell metacharacters. Successful exploitation allows the attacker to escape the restricted management environment and execute arbitrary shell commands with elevated privileges. |
| Insecure file permissions in the CodeCatalyst connection handler in AWS Toolkit for VS Code before 4.10.0 allowed local users to obtain CodeCatalyst bearer tokens via reading world-readable token cache files.
To mitigate this issue, users should upgrade to version 4.10.0 or later. |
| Malcolm's nginx Lua role-based access control (RBAC) layer decides whether an authenticated user may reach a role-restricted path (e.g. /htadmin, /auth, /admin_login, /arkime/api/esadmin, NetBox, upload endpoints) by pattern-matching the raw, percent-encoded request URI. Nginx itself, however, selects which location block actually serves the request using the percent-decoded, normalized URI. Because the RBAC check never percent-decodes its input, an authenticated low-privilege user can request an admin-only path using percent-encoding (e.g. /%68tadmin.php) and have nginx route it to the restricted location while the Lua RBAC gate evaluating the un-decoded raw string finds no matching restriction and grants access. |
| FFmpeg before 8.1.3 contains a protection mechanism failure in the HLS demuxer that allows attackers to bypass protocol and allowed_extensions restrictions when opening child playlists. Attackers can supply a crafted master playlist whose child playlists use disallowed protocols or non-multimedia local files, making parse_playlist() open resources the HLS security policy should block. |
| FFmpeg through 9.0.2 contains an infinite loop vulnerability in ff_rtsp_connect() in libavformat/rtsp.c that follows RTSP 3xx redirects without any redirect limit. Attackers controlling an RTSP server can answer every request with a 302 redirect to itself or another server, causing endless reconnects that saturate a CPU core. |
| FFmpeg before 8.1.3 contains an infinite loop vulnerability in the HLS demuxer that allows remote attackers to cause denial of service because parse_playlist() accepts Master Playlist tags inside Media Playlists. Attackers can trick victims into opening a crafted self-referencing playlist that endlessly adds variants in hls_read_header(), causing unbounded CPU and I/O consumption. |
| Malcolm's upload-processing pipeline (scripts/safe-extract.py) enforces entry-count, nesting-depth, and total-uncompressed-byte limits when extracting container archives (zip/tar/rar/7z via libarchive), but those limits are not applied when the uploaded file is a single-stream compressed format (.gz, .bz2, .xz, .lzma, .lz) that isn't a .tar.*-style archive. Any authenticated user permitted to upload PCAP/log files can upload a small, highly compressible file (e.g. a gzip bomb) that decompresses to an effectively unbounded size on disk, exhausting the shared Docker volume used by OpenSearch, Logstash, Arkime, and Zeek, and disrupting the platform for all users. |
| The Malcolm kiosk Flask application exposes a POST /script_call/<script> endpoint with zero authentication and wildcard CORS (CORS(app)). An attacker can force the operator's browser to execute arbitrary management commands via CSRF, including control.py --wipe which permanently deletes all captured network traffic and forensic logs, or control.py --stop which blinds the security monitoring. |
| The Arkime live capture service (arkime-live) in Malcolm runs with network_mode: host, exposing port 8005 on all network interfaces (viewHost=0.0.0.0). Arkime trusts the X-Forwarded-User header from any IP address (userAuthIps=::,0.0.0.0/0) and auto-creates users with full access. The passwordSecret is hardcoded to the public value "Malcolm". A network-adjacent attacker bypasses nginx entirely by connecting directly to port 8005 with a forged identity header. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: only count successfully cleared runs when freeing clusters
ntfs_cluster_free_from_rl_nolock() adds a run's length to nr_freed
whenever the error bookkeeping condition is false, which includes
cases where ntfs_bitmap_clear_run() actually failed - e.g. a second
run failing with the same errno as an earlier one, or any failure
after a non-ENOMEM error was already recorded. Since a failed
ntfs_bitmap_clear_run() rolls back its partial modifications, no
bits were cleared for that run, yet its length still inflates
vol->free_clusters, corrupting statfs output and the allocator's
free space gate.
Only count runs whose bitmap clear succeeded. |
| Malcolm file-upload component ships the upstream FilePond PHP server (pqina/filepond-server-php) largely unmodified: Dockerfile copies all upstream *.php files and Malcolm only overwrites config.php and submit.php. Upstream index.php exposes a fetch API route that instructs the server to download an arbitrary URL with curl (including FOLLOWLOCATION) and, for HEAD requests, stores the fetched response body in the upload container's transfer directory and returns the transfer ID to the caller, enabling full readback of the fetched content. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Appsbd Vitepos vitepos-lite allows Blind SQL Injection.This issue affects Vitepos: from n/a through 3.6.1. |
| Missing Authorization vulnerability in YITH YITH WooCommerce Product Bundles yith-woocommerce-product-bundles allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects YITH WooCommerce Product Bundles: from n/a through 2.29.0. |
| Missing Authorization vulnerability in BdThemes Ultimate Post Kit ultimate-post-kit allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Ultimate Post Kit: from n/a through 4.5.5. |
| Authorization Bypass Through User-Controlled Key vulnerability in Liquid Web / StellarWP Event Tickets event-tickets allows Manipulating User-Controlled Variables.This issue affects Event Tickets: from n/a through 5.30.0.1. |
| Malcolm's nginx based reverse proxy contains a URL path normalization inconsistency between its Lua based role-based access control (RBAC) authorization layer and nginx's own request routing logic. An authenticated user can craft a specially formatted request path to bypass role-based restrictions and reach administrative or role gated endpoints they should not have access to. This affects all restricted paths protected by the RBAC authorization layer, including file upload, PHP server, htadmin, and authentication management interfaces. |
| JHipster is a development platform to quickly generate, develop, and deploy modern web applications and microservice architectures. Prior to generator-jhipster 9.4.0 and react-jhipster 1.1.0, generated applications can persist attacker-controlled Blob data and companion ContentType values, return them through generated REST endpoints, and pass them to the generated openFile helper in generators/client/generators/common/templates/src/main/webapp/app/shared/jhipster/data-utils.ts.ejs. The helper uses the returned ContentType as the browser Blob MIME type and opens an object URL, so a normal authenticated user with write access to a Blob-bearing entity can store active HTML or SVG content that may execute under the application origin when a privileged user opens it. Exploitability depends on the generated application's content security policy and target-browser Blob behavior. This issue is fixed in generator-jhipster 9.4.0 and react-jhipster 1.1.0. |
| Malcolm's front nginx reverse proxy defines a "Dashboards → Arkime shortcut" location using a case-insensitive regex matcher but a case-sensitive rewrite. A request whose path segment is not exact-lowercase (for example /IDDASH2ARK/...) enters the location (the matcher fires) but evades the rewrite (no redirect is issued), so nginx falls through to the location's proxy_pass to the Arkime backend. That location is the one proxied location in the shipped config that does not include the per-location authentication file, so the request reaches Arkime unauthenticated. The same location also forwards a client-supplied X-Forwarded-User header un-overwritten, and Arkime is configured to trust X-Forwarded-User as the authenticated username — so an unauthenticated network caller can reach the Arkime backend while supplying a forged, auto-provisioned identity. |
