| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: add missing rcu list annotations and operations
sashiko-bot remarked the missing use of list_add_rcu() in
bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure
when bcm_proc_show() traverses the bcm_op's under rcu_read_lock().
To cover all initial settings of the bcm_op's the list_add_rcu() calls
are moved to the end of the setup code.
While at it, also fix the mirroring removal side: bcm_release() called
bcm_remove_op() - which frees the op via call_rcu() - on ops that were
still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first.
Unlink each op with list_del_rcu() before handing it to bcm_remove_op(),
matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op(). |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: make system files immutable to prevent corruption
When a system file such as $Bitmap is exposed via show_sys_files and
written from userspace, the volume is corrupted and, because the cluster
allocator scans $Bitmap through the same inode's page cache, a write to
$Bitmap also deadlocks writeback against the folio it already holds locked.
These files are maintained by the driver itself and have no valid reason
to be written through the file interface. Mark base metadata files
(mft_no < FILE_first_user) as immutable during inode read so the VFS
rejects write, mmap, truncate and unlink with -EPERM. Directories are
skipped so the root and $Extend remain usable. Internal metadata updates
do not go through the VFS write path and are unaffected. |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 is affected by a denial of service caused by insecure deserialization. A low-privileged, administrative user could exploit this vulnerability to consume system resources when the restConnector-2.0 feature is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix mrec_lock ABBA deadlock in rename
ntfs_file_fsync(), ntfs_dir_fsync() and __ntfs_write_inode() lock an
inode's mrec_lock before taking the mrec_lock of its parent directory.
ntfs_rename() takes old_ni->mrec_lock and old_dir_ni->mrec_lock
before taking new_ni->mrec_lock for an existing target, or
new_dir_ni->mrec_lock for a cross-directory rename.
This can deadlock when ntfs_file_fsync() or __ntfs_write_inode() holds
the target inode, or when ntfs_dir_fsync() holds a child target
directory, while rename() holds the parent directory and waits for the
target.
Fix this by locking the existing target inode before taking any parent
directory mrec_lock. For cross-directory renames where the target parent
is a descendant of the source parent, lock the target parent before the
source parent so the directory order matches the child-to-parent order used
by ntfs_file_fsync(), ntfs_dir_fsync(), and __ntfs_write_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid stale runlist element dereference in MFT writeback
ntfs_write_mft_block() maps each $MFT record through the $MFT data
runlist. For sub-folio clusters it looks up a struct runlist_element under
ni->runlist.lock, drops the lock, and later uses rl->length and rl->vcn
when choosing folio_sz.
That pointer is only borrowed from ni->runlist.rl. Concurrent $MFT
allocation extension can merge a replacement runlist under the same lock,
and ntfs_rl_realloc() can free the old backing array. If that happens
between the lookup and the later folio_sz decision, writeback can
dereference freed runlist storage.
The buggy scenario involves two paths, with each column showing the order
within that path:
MFT writeback path: $MFT allocation extension:
1. Look up rl under 1. Extend the $MFT data allocation.
ni->runlist.lock. 2. Publish a replacement runlist.
2. Drop ni->runlist.lock. 3. Free the old runlist array.
3. Read rl->length and rl->vcn
to choose folio_sz.
Compute the remaining run length while ni->runlist.lock is still held, and
use that scalar after unlock. This preserves the existing folio sizing
decision without carrying a borrowed runlist_element across the lock
boundary.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in ntfs_mft_writepages+0x1c8d/0x1fb0
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? ntfs_mft_writepages+0x1c8d/0x1fb0
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x20d/0x410
? ntfs_mft_writepages+0x1c8d/0x1fb0
kasan_report+0xe0/0x110
? ntfs_mft_writepages+0x1c8d/0x1fb0
ntfs_mft_writepages+0x1c8d/0x1fb0
? __pfx_ntfs_mft_writepages+0x10/0x10
? __pfx___mutex_unlock_slowpath+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? iput+0x92/0xa80
do_writepages+0x219/0x530
? __pfx_do_writepages+0x10/0x10
__writeback_single_inode+0x117/0xf50
? do_raw_spin_lock+0x130/0x270
? __pfx_do_raw_spin_lock+0x10/0x10
? __pfx___writeback_single_inode+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
writeback_sb_inodes+0x65b/0x1810
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x2b8/0x2f0
? __pfx_writeback_sb_inodes+0x10/0x10
? lock_release+0x1e0/0x280
? _raw_spin_unlock+0x23/0x40
? move_expired_inodes+0x2b8/0x850
__writeback_inodes_wb+0xf4/0x270
? __pfx___writeback_inodes_wb+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? queue_io+0x2e4/0x410
wb_writeback+0x666/0x880
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx_wb_writeback+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? get_nr_dirty_inodes+0x1c/0x170
wb_workfn+0x75e/0xbb0
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x27/0x60
? __pfx_wb_workfn+0x10/0x10
? __pfx_debug_object_deactivate+0x10/0x10
? lock_acquire+0x2b8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? lock_release+0x1e0/0x280
process_one_work+0x8d0/0x1870
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x575/0xf80
? __pfx_worker_thread+0x10/0x10
kthread+0x2e7/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x576/0x810
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x57e/0xe10
? __switch_to_asm+0x33/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 970:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kvmalloc_node_noprof+0x353/0x920
ntfs_rl_realloc+0x3c/0x80
ntfs_runlists_merge+0x1212/0x3010
ntfs_mft_data_extend_allocation_nolock+0x3e0/0x1f40
ntfs_mft_record_alloc+0x1ab4/0x4f10
__ntfs_create+0x680/0x2e50
ntfs_create+0x1e6/0x3a0
path_openat+0x2b55/0x3c10
do_file_open+0x1f4/0x460
do_sys_openat2+0xde/0x170
__x64_sys_openat+0x122/0x1e0
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 1294:
kasan_save_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid R5_Overlap races while breaking stripe batches
KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()
on sh->dev[i].flags (plain word write vs. atomic bit op)..
and .. one possible scenario is:
CPU1 CPU2
break_stripe_batch_list(sh1)
-> handle sh2
-> lock(sh2)
-> sh2->batch_head = NULL
-> unlock(sh2)
-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)
-> wake_up_bit(sh2->dev[i].flags)
raid5_make_request()
-> add_all_stripe_bios(sh2)
-> lock(sh2)
-> stripe_bio_overlaps(sh2) returns true
batch_head is NULL, so new bio overlap
exist bio on sh2 -> true
-> set_bit(R5_Overlap, sh2->dev[i].flags)
-> unlock(sh2)
-> wait_on_bit(sh2->dev[i].flags)
-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap
No wait_up_bit(), CPU2 could be wait_on_bit() forever...
Fix by :
- Expand the protect zone.
- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.
- Move sh/head_sh->batch_head = NULL to the end of protected zone , and ,
any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:
- see batch_head != null, and , is rejected by stripe_bio_overlaps()
under the lock (no R5_Overlap wait ) , or ,
- sees batch_head == NULL, only after dev[i].flags has already been
set and the prior R5_Overlap waiters worken.
KCSAN report:
================================================
BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request
write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0:
raid5_make_request+0xea0/0x2930
md_handle_request+0x4a2/0xa40
md_submit_bio+0x109/0x1a0
__submit_bio+0x2ec/0x390
submit_bio_noacct_nocheck+0x457/0x710
submit_bio_noacct+0x2a7/0xc20
submit_bio+0x56/0x250
blkdev_direct_IO+0x54c/0xda0
blkdev_write_iter+0x38f/0x570
aio_write+0x22b/0x490
io_submit_one+0xa51/0xf70
__x64_sys_io_submit+0xf7/0x220
x64_sys_call+0x1907/0x1c60
do_syscall_64+0x130/0x570
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5:
break_stripe_batch_list+0x249/0x480
handle_stripe_clean_event+0x720/0x9b0
handle_stripe+0x32fb/0x4500
handle_active_stripes.isra.0+0x6e0/0xa50
raid5d+0x7e0/0xba0
md_thread+0x15a/0x2d0
kthread+0x1e3/0x220
ret_from_fork+0x37a/0x410
ret_from_fork_asm+0x1a/0x30
value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Guard conntrack opts error writes
The conntrack lookup and allocation kfuncs take an opts pointer
together with an opts__sz argument. The verifier checks only the memory
range described by opts__sz, but the wrappers unconditionally write
opts->error whenever the internal lookup or allocation helper returns an
error.
For an invalid size smaller than the end of opts->error, that write can
land outside the verifier-checked range. Keep returning NULL for invalid
arguments, but only report the error through opts->error when the
supplied size includes the field.
This preserves error reporting for the supported 12-byte and 16-byte
layouts, and for other invalid sizes that still include opts->error. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Fix bcall rep leak and unbounded peek
rpcrdma_is_bcall() decodes a reply's first words to decide whether
the frame is a backchannel call. Two issues in that decode path
let a short or malformed reply leak the receive buffer and drain
the Receive queue.
First, the speculative peek
p = xdr_inline_decode(xdr, 0);
/* five p++ reads follow */
asks xdr_inline_decode() for zero bytes, which returns xdr->p
without consulting xdr->end. The five subsequent __be32 reads can
then walk up to 20 bytes past the wire payload into stale regbuf
contents and misclassify the reply as a backchannel call.
Second, after the post-peek
p = xdr_inline_decode(xdr, 3 * sizeof(*p));
if (unlikely(!p))
return true;
the short-header arm returns true without calling
rpcrdma_bc_receive_call(). The contract with the caller is that a
true return transfers ownership of rep to the backchannel path:
rpcrdma_reply_handler()
if (rpcrdma_is_bcall(r_xprt, rep))
return; /* bare return, skips out_post */
...
out_post:
rpcrdma_post_recvs(r_xprt, credits + ...);
Because rpcrdma_bc_receive_call() never ran, no one took rep, but
rpcrdma_reply_handler still bare-returns past rpcrdma_rep_put()
and rpcrdma_post_recvs(). The rep, with its persistently
DMA-mapped receive buffer, is orphaned on rb_all_reps and freed
only at transport teardown. This completion reposts nothing, so
its slot is reclaimed only when a later forward-channel reply
reaches out_post and rpcrdma_post_recvs() allocates a fresh rep to
backfill; absent that traffic the Receive queue drains and the
peer's Sends draw RNR NAKs.
Fix by consulting xdr->end after the zero-length peek so the five
__be32 reads cannot run unless 20 bytes of wire payload remain. A
byte-precise comparison against xdr->end is required because a
non-4-aligned receive rounds the stream's word count up past the
true payload. Also return false from the short-header arm so the
reply falls through the normal out_norqst cleanup chain
(rpcrdma_rep_put() plus rpcrdma_post_recvs()). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: resize log->one_page_buf when adopting on-disk page size
log_replay() allocates log->one_page_buf using the page size that was
chosen from the host PAGE_SIZE:
log->one_page_buf = kmalloc(log->page_size, GFP_NOFS);
Later, when a restart area is found, the log page size recorded on disk
is adopted:
t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size);
if (log->page_size != t32) {
log->l_size = log->orig_file_size;
log->page_size = norm_file_page(t32, &log->l_size,
t32 == DefaultLogPageSize);
}
If the on-disk page size is larger than the size used for the initial
allocation, log->page_size grows but one_page_buf is left at its
original, smaller size. A subsequent unaligned read_log_page() then
reads log->page_size bytes into the undersized scratch buffer:
page_buf = page_off ? log->one_page_buf : *buffer;
err = ntfs_read_run_nb_ra(ni->mi.sbi, &ni->file.run, page_vbo, page_buf,
log->page_size, NULL, &log->read_ahead);
overflowing the allocation. This is reachable when mounting a dirty
NTFS volume whose log was formatted with a page size larger than the
buffer initially allocated on the mounting host (for example a 64K-log
volume mounted on a host that allocated a 4K scratch buffer).
Grow one_page_buf when the adopted on-disk page size exceeds the size
used for the initial allocation. On krealloc() failure the original
buffer is left intact and freed by the existing error path. |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 IBM WebSphere Application Server Liberty is vulnerable to an authentication bypass when the rtcomm-1.0 or rtcommGateway-1.0 feature is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix callback service message parsers to pass through -EAGAIN
The AFS filesystem client uses an rxrpc server to listen for callback
notifications. Each callback call type handler has a delivery function
that parses the incoming request stream, and this should return -EAGAIN the
last packet hasn't yet been seen, but all currently queued received data is
consumed. afs_extract_data() does this, but the -EAGAIN return is switched
to 0 inadvertantly
Fix callback service message parsers to pass through -EAGAIN |
| In the Linux kernel, the following vulnerability has been resolved:
xen/pvcalls: bound backend response req_id before indexing rsp[]
pvcalls_front_event_handler() takes req_id directly from the
backend-supplied ring response and uses it to index the fixed-size
bedata->rsp[] array for a memcpy() and a store, with no range check. A
malicious or buggy backend can set req_id past PVCALLS_NR_RSP_PER_RING
and drive an out-of-bounds write past the bedata allocation.
req_id was also declared int while the wire field rsp->req_id is u32, so
a range check on the signed value alone is insufficient: a backend
req_id of 0xffffffff becomes -1, passes a >= PVCALLS_NR_RSP_PER_RING
test and indexes bedata->rsp[-1]. Declare req_id as u32 so a single
bound covers both ends.
A backend that sends an out-of-range req_id has violated the wire
protocol, so rather than silently dropping the response, log once and
stop trusting the backend: set bedata->disabled. The event handler then
ignores further responses, and the request paths that wait for a
response return -EIO instead of blocking forever. This mirrors the
fatal-error handling xen-netback uses (xenvif_fatal_tx_err()).
The pvcalls frontend currently trusts its backend, so this is not a
classic-Xen security issue, but it matters for hardening PV frontends
against malicious backends (confidential and disaggregated deployments). |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix addr_wq_timer race in sctp_free_addr_wq()
sctp_free_addr_wq() previously removed addr_wq_timer using timer_delete()
while holding addr_wq_lock. However, timer_delete() does not guarantee that
a currently running timer handler has completed.
This allows a race with sctp_addr_wq_timeout_handler(), where the handler
may still run after addr_waitq has been freed, acquire addr_wq_lock, and
access freed memory, leading to a use-after-free.
Fix this by calling timer_shutdown_sync() before taking addr_wq_lock. This
guarantees that any in-flight timer handler has finished and prevents the
timer from being re-armed during teardown, making subsequent cleanup safe. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: check the number of BDs needed for xdp_frame
The size of xdp_redirect_arr array is ENETC_MAX_SKB_FRAGS. However, the
number of fragments contained in xdp_frame may be greater than or equal
to ENETC_MAX_SKB_FRAGS, which will cause the access to xdp_redirect_arr
to be out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy()
TIPC UDP media bearer teardown calls dst_cache_destroy() on its
replicast caches before calling synchronize_net() to wait for
concurrent RCU readers (transmitters) to finish:
static void cleanup_bearer(struct work_struct *work)
{
...
list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) {
dst_cache_destroy(&rcast->dst_cache);
list_del_rcu(&rcast->list);
kfree_rcu(rcast, rcu);
}
...
dst_cache_destroy(&ub->rcast.dst_cache);
udp_tunnel_sock_release(ub->sk);
synchronize_net();
...
}
This is highly buggy because dst_cache_destroy() immediately frees the
per-CPU cache memory (free_percpu()) and releases the cached dst
entries without any synchronization.
If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another
CPU under RCU protection, it can call dst_cache_get() concurrently,
leading to:
1. Use-After-Free on the per-CPU cache pointer itself (crash).
2. "rcuref - imbalanced put()" warning if it attempts to release a
dst that was concurrently released by dst_cache_destroy().
Furthermore, calling kfree(ub) immediately after synchronize_net() without
closing the socket first (or waiting after closing it) leaves a window
where a concurrent receiver (tipc_udp_recv()) could start after
synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs.
To fix this, we must defer dst_cache_destroy() and kfree(ub) until after
we have ensured that no more readers can see the bearer/socket and all
existing readers have finished:
1. Defer rcast entry destruction (both dst_cache_destroy() and kfree())
to an RCU callback using call_rcu_hurry().
Using call_rcu_hurry() ensures the dst entries are released quickly.
2. Release the bearer socket using udp_tunnel_sock_release() (stops
new receive readers).
3. Call synchronize_net() to wait for all outstanding RCU readers
(both transmit and receive) to finish.
4. Now that it is safe, call dst_cache_destroy() on the main bearer
cache, and free ub.
Note: 3) and 4) can be changed later in net-next to also use
call_rcu_hurry() and get rid of the synchronize_net() latency. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sungem: fix probe error cleanup
gem_init_one() calls gem_remove_one() when register_netdev() fails.
gem_remove_one() unregisters and frees resources owned by the net_device,
including the DMA block, MMIO mapping, PCI regions, and the net_device
itself. gem_init_one() then falls through to its own cleanup labels and
frees the same resources again.
Keep the register_netdev() error path in gem_init_one(): clear drvdata so
PM/remove paths do not see a half-registered device, remove the NAPI
instance added during probe, and let the existing cleanup labels release
the resources once.
The issue was found by a local static-analysis checker for probe error
paths. The reported path was manually inspected before sending this fix.
Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed
because no sungem hardware is available. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix type confusion of dst_entry
IOAM uses a dummy dst_entry(null_dst) to mark that the destination should
not be changed after the transformation. This dst is stored in the IOAM lwt
state and may be passed to dst_cache_set_ip6().
However, the IPv6 dst cache path eventually calls rt6_get_cookie(), which
treats the dst_entry as part of a struct rt6_info. Since the null_dst was
embedded directly as a struct dst_entry in struct ioam6_lwt, this resulted
in an invalid cast and rt6_get_cookie() reading fields from the wrong
object.
In practice, the wrong cookie is not used while dst->obsolete is zero, but
rt6_get_cookie() may also access per-cpu value when rt->sernum is
zero. In this case, rt->sernum aliases ioam6_lwt::cache::reset_ts, which
can become zero, making this a potential invalid pointer access.
Fix this by embedding a full struct rt6_info for the dummy IPv6 route and
passing its dst member to the dst APIs. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent potential lcn remains uninitialized
The target VCN being sought was not found within runs[0], causing
run_lookup() to return false. This causes run_lookup_entry() to return
false, which in turn results in a len value of 0, and the new parameter
passed to attr_data_get_block() is NULL. Collectively, these factors
ultimately cause attr_data_get_block_locked() to exit prematurely without
initializing lcn, thereby triggering [1].
To prevent [1], the clen check within ni_seek_data_or_hole() has been
moved to occur before the lcn check.
[1]
BUG: KMSAN: uninit-value in ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862
ni_seek_data_or_hole+0x24f/0x5f0 fs/ntfs3/frecord.c:2862
ntfs_llseek+0x22a/0x4a0 fs/ntfs3/file.c:1530
vfs_llseek fs/read_write.c:391 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Restore SST-PP control to all domains
The SST-PP control offset is only restored to power domain 0 after
resume. During suspend, control values are read and stored for all
power domains.
Use pd_info->sst_base instead of power_domain_info->sst_base, which
only points to power domain 0 base address. |
| In the Linux kernel, the following vulnerability has been resolved:
net: thunderbolt: Fix frags[] overflow by bounding frame_count
tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The
first frame goes into the skb linear area and every further frame is added as
a page fragment.
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
page, hdr_size, frame_size,
TBNET_RX_PAGE_SIZE - hdr_size);
A packet of frame_count frames therefore ends up with frame_count - 1
fragments. tbnet_check_frame() only bounds the peer supplied frame_count to
TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A
peer that sends a packet of 19 or more small frames pushes nr_frags past
MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and
corrupts memory after the shared info.
Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never
produce more fragments than frags[] can hold. This matches the recent skb
frags overflow fixes in other receive paths, for example f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") and 600dc40554dc
("net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()"). |
