| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]()
Sashiko found that iptunnel_pmtud_build_icmp() and
iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr()
before an skb_cow() call which can reallocate skb->head.
Fix this possible UAF by initializing the local variables
after the skb_cow() call.
Remove skb_reset_network_header() calls which were not needed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
If dcid is received for an already-assigned destination CID the spec
requires that both channels to be discarded, but calling l2cap_chan_del
may invalidate the tmp cursor created by list_for_each_entry_safe and
in fact it is the wrong procedure as the chan->dcid may be assigned
previously it really needs to be disconnected.
Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so
instead schedule l2cap_chan_timeout with delay 0 to close the channel
asynchronously. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6: vti: Use ip6_tnl.net in vti6_changelink().
ip netns add ns1
ip netns add ns2
ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7
ip -n ns1 link set vti6_test netns ns2
ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9
ip netns del ns2
ip netns del ns1
[ 132.495484] ------------[ cut here ]------------
[ 132.497609] kernel BUG at net/core/dev.c:12376!
Commit 61220ab34948 ("vti6: Enable namespace changing") dropped
NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then
move through IFLA_NET_NS_FD. After the move dev_net(dev) points
at the new netns while t->net stays at the creation netns.
vti6_changelink() and vti6_update() still use dev_net(dev) and
dev_net(t->dev). They unlink from one per netns hash and relink
into another. The creation netns is left with a stale entry.
cleanup_net() of that netns later walks freed memory.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: add hook transactions for device deletions
Restore the flag that indicates that the hook is going away, ie.
NFT_HOOK_REMOVE, but add a new transaction object to track deletion
of hooks without altering the basechain/flowtable hook_list during
the preparation phase.
The existing approach that moves the hook from the basechain/flowtable
hook_list to transaction hook_list breaks netlink dump path readers
of this RCU-protected list.
It should be possible use an array for nft_trans_hook to store the
deleted hooks to compact the representation but I am not expecting
many hook object, specially now that wildcard support for devices
is in place.
Note that the nft_trans_chain_hooks() list contains a list of struct
nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while
this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE.
Note that new commands can be updated to use nft_trans_hook for
consistency.
This patch also adapts the event notification path to deal with the list
of hook transactions. |
| Meshtastic is an open source mesh networking solution. Prior to version 2.7.21.1370b23, the Meshtastic GitHub repository's main_matrix.yml workflow is triggered by pull_request_target and multiple jobs check out the attacker's fork code and execute it with access to repository secrets and elevated GITHUB_TOKEN permissions. No approval gate exists. Pull requests from external users with author_association: "NONE" triggered the CI workflow automatically. The workflow directly executes attacker-controlled files from the fork checkout. This issue could have resulted in supply chain compromise, self-hosted runner compromise, and/or repository takeover for the repo. This issue is separate from GHSA-6mwm-v2vv-pp96, which addressed a command injection via github.head_ref in the setup job of the same workflow. That fix correctly moved to environment variables. However, the more critical fork checkout vulnerability across the check, build, and build-debian-src jobs was not addressed. Version 2.7.21.1370b23 contains a patch for thie issue. |
| A security vulnerability has been detected in Sipeed PicoClaw up to 0.2.9. Affected is the function NewContextBuilder of the file pkg/agent/context.go. Such manipulation leads to inclusion of functionality from untrusted control sphere. The attack needs to be performed locally. The exploit has been disclosed publicly and may be used. The reported GitHub issue was closed automatically with the label "not planned" by a bot. |
| Microsoft Streaming Service Elevation of Privilege Vulnerability |
| Windows Kernel-Mode Driver Elevation of Privilege Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Snapshot notifier callbacks under lock
Both notification handlers currently look up a notifier callback under
notify_lock, drop the lock, and then dereference the returned
notifier entry. A concurrent unregister can delete and free that
entry in the gap, leaving the handler to dereference stale memory.
Copy the callback pointer and callback data while notify_lock is
still held and invoke the callback only after the lock is dropped.
This keeps the existing callback execution model while removing the
use-after-free window in both the framework and non-framework
notification paths. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix early put of sink folio in netfs_read_gaps()
Fix netfs_read_gaps() to release the sink page it uses after waiting for
the request to complete. The way the sink page is used is that an
ITER_BVEC-class iterator is created that has the gaps from the target folio
at either end, but has the sink page tiled over the middle so that a single
read op can fill in both gaps.
The bug was found by KASAN detecting a UAF on the generic/075 xfstest in
the cifsd kernel thread that handles reception of data from the TCP socket:
BUG: KASAN: use-after-free in _copy_to_iter+0x48a/0xa20
Write of size 885 at addr ffff888107f92000 by task cifsd/1285
CPU: 2 UID: 0 PID: 1285 Comm: cifsd Not tainted 7.0.0 #6 PREEMPT(lazy)
Call Trace:
dump_stack_lvl+0x5d/0x80
print_report+0x17f/0x4f1
kasan_report+0x100/0x1e0
kasan_check_range+0x10f/0x1e0
__asan_memcpy+0x3c/0x60
_copy_to_iter+0x48a/0xa20
__skb_datagram_iter+0x2c9/0x430
skb_copy_datagram_iter+0x6e/0x160
tcp_recvmsg_locked+0xce0/0x1130
tcp_recvmsg+0xeb/0x300
inet_recvmsg+0xcf/0x3a0
sock_recvmsg+0xea/0x100
cifs_readv_from_socket+0x3a6/0x4d0 [cifs]
cifs_read_iter_from_socket+0xdd/0x130 [cifs]
cifs_readv_receive+0xaad/0xb10 [cifs]
cifs_demultiplex_thread+0x1148/0x1740 [cifs]
kthread+0x1cf/0x210 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Make RX SKB per-port
The SKB used to assemble packets from fragments in gmac_rx()
is static local, but the Gemini has two ethernet ports, meaning
there can be races between the ports on a bad day if a device
is using both.
Make the RX SKB a per-port variable and carry it over between
invocations in the port struct instead.
Zero the pointer once we call napi_gro_frags(), on error (after
calling napi_free_frags()) or if the port is stopped.
Zero it in some place where not strictly necessary just to
emphasize what is going on.
This was found by Sashiko during normal patch review. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: don't mix devm and drmm functions
Mixing devm and drmm functions will result in a use-after-free on msm
driver teardown if userspace keeps a reference on the drm device:
The WB connector data will be destroyed because of the use of
devm_kzalloc()), while the usersoace still can try interacting with the
WB connector (which uses drmm_ functions).
Change dpu_writeback_init() to use drmm_.
Patchwork: https://patchwork.freedesktop.org/patch/722656/ |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: respect peer refcount in CMD_NEW_PEER error path
ovpn_nl_peer_new_doit()'s error path calls ovpn_peer_release() directly
rather than ovpn_peer_put(), bypassing the kref. The accompanying
comment ("peer was not yet hashed, thus it is not used in any context")
holds for UDP but not for TCP.
For UDP, the ovpn_socket union uses the .ovpn arm and never points back
at a peer; UDP encap_recv looks up peers via the not-yet-populated
hashtables, so the new peer is unreachable until ovpn_peer_add()
publishes it.
For TCP, ovpn_socket_new() sets ovpn_sock->peer and
ovpn_tcp_socket_attach() publishes ovpn_sock via rcu_assign_sk_user_data().
From that moment until ovpn_socket_release() detaches in the error path,
the TCP fd is fully wired: userspace recvmsg / sendmsg / close / poll
on the fd, as well as the strparser-driven ovpn_tcp_rcv() path, can
reach the peer through sk_user_data -> ovpn_sock->peer and bump its
refcount via ovpn_peer_hold().
ovpn_tcp_socket_wait_finish() (called inside ovpn_socket_release())
drains strparser and the tx work, but does not synchronize with
userspace syscall callers that already hold a peer reference. If
ovpn_nl_peer_modify() or ovpn_peer_add() returns an error while such
a caller is in flight - notably an ovpn_tcp_recvmsg() blocked in
__skb_recv_datagram() on peer->tcp.user_queue - the direct
ovpn_peer_release() destroys the peer while the caller still holds
the reference, and the eventual ovpn_peer_put() from that caller
operates on freed memory.
Replace the direct destructor call with ovpn_peer_put() so the kref
correctly defers destruction until the last reference is dropped.
In the common case where no concurrent user is present, behaviour is
unchanged: the kref hits zero immediately and ovpn_peer_release_kref()
runs the same destructor.
With this conversion ovpn_peer_release() has no callers outside peer.c
- ovpn_peer_release_kref() in the same translation unit is the only
remaining user - so make it static and drop its declaration from
peer.h. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Clear wcid pointer in mt7996_mac_sta_deinit_link()
Clear WCID pointer removing the sta link in mt7996_mac_sta_deinit_link
routine. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: llsec: add skb_cow_data() before in-place crypto
llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(),
llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform
in-place cryptographic transformations on skb data. They build a
scatterlist with sg_init_one() pointing into the skb's linear data area
and then pass the same scatterlist as both src and dst to the crypto API
(e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt).
On the RX path, __ieee802154_rx_handle_packet() clones the received skb
before handing it to each subscriber via ieee802154_subif_frame(). The
cloned skb shares the same underlying data buffer via reference
counting. When llsec_do_decrypt() subsequently modifies this shared
buffer in place, it corrupts data that other clones -- potentially
belonging to other sockets or subsystems -- still reference.
On the TX path, similar data sharing can occur when an skb's head has
been cloned (skb_cloned() returns true).
The fix is to call skb_cow_data() before performing any in-place crypto
operation. skb_cow_data() ensures that the skb's data area is not
shared: if the skb head is cloned or the data spans multiple fragments,
it copies the data into a private buffer that can be safely modified in
place. This is the same pattern used by:
- ESP (net/ipv4/esp4.c, net/ipv6/esp6.c)
- MACsec (drivers/net/macsec.c)
- WireGuard (drivers/net/wireguard/receive.c)
- TIPC (net/tipc/crypto.c)
Without this guard, in-place crypto on shared skb data leads to:
- Silent data corruption of other skb clones
- Use-after-free when the crypto API scatterwalk writes through a
page that has already been freed by another clone's kfree_skb()
- Kernel crashes under concurrent 802.15.4 traffic with security
enabled (KASAN/KMSAN reports slab-use-after-free)
Found by 0sec (https://0sec.ai) using automated source analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Pin request_key_auth payload in instantiate paths
A: request_key() B: KEYCTL_INSTANTIATE_IOV
================ =========================
create auth key
store rka in auth key
wait for helper
get auth key
load rka from auth key
copy user payload
sleep on #PF
helper completed
detach and free rka
destroy auth key
wake up
use rka->target_key
**USE-AFTER-FREE**
Give request_key_auth payloads a refcount. Take a payload reference while
authkey->sem stabilizes the payload and revocation state. Hold that
reference across the instantiate and reject paths. Drop the auth key
owning reference from revoke and destroy.
[jarkko: Replaced the first two paragraphs of text with an actual
concurrency scenario.] |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on f2fs_get_node_folio_ra()
kernel BUG at fs/f2fs/file.c:845!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:f2fs_do_truncate_blocks+0x1115/0x1140 fs/f2fs/file.c:845
Code: fc fc 90 0f 0b e8 8b 9d 9a fd 90 0f 0b e8 83 9d 9a fd 48 89 df 48 c7 c6 60 d1 1a 8c e8 54 f1 fc fc 90 0f 0b e8 6c 9d 9a fd 90 <0f> 0b e8 64 9d 9a fd 90 0f 0b 90 e9 93 fd ff ff e8 56 9d 9a fd 90
RSP: 0018:ffffc9000e4474c0 EFLAGS: 00010283
RAX: ffffffff842b1d34 RBX: 0000000000000003 RCX: 0000000000100000
RDX: ffffc9000f03a000 RSI: 0000000000035503 RDI: 0000000000035504
RBP: ffffc9000e447608 R08: ffff8880123b0000 R09: 0000000000000002
R10: 00000000fffffffe R11: 0000000000000002 R12: 0000000000000001
R13: 0000000000000000 R14: 1ffff92001c88ea0 R15: 00000000ffff039c
FS: 00007f7e02ee36c0(0000) GS:ffff88808c887000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff0305c4000 CR3: 0000000012d4c000 CR4: 0000000000352ef0
Call Trace:
<TASK>
f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:882
f2fs_truncate+0x471/0x7c0 fs/f2fs/file.c:940
f2fs_evict_inode+0xa3f/0x1ac0 fs/f2fs/inode.c:907
evict+0x61e/0xb10 fs/inode.c:841
f2fs_fill_super+0x5f43/0x78f0 fs/f2fs/super.c:5224
get_tree_bdev_flags+0x431/0x4f0 fs/super.c:1694
vfs_get_tree+0x92/0x2a0 fs/super.c:1754
fc_mount fs/namespace.c:1193 [inline]
do_new_mount_fc fs/namespace.c:3758 [inline]
do_new_mount+0x341/0xd30 fs/namespace.c:3834
do_mount fs/namespace.c:4167 [inline]
__do_sys_mount fs/namespace.c:4383 [inline]
__se_sys_mount+0x31d/0x420 fs/namespace.c:4360
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
count = ADDRS_PER_PAGE(dn.node_folio, inode);
count -= dn.ofs_in_node;
f2fs_bug_on(sbi, count < 0);
The fuzz test will trigger above bug_on in f2fs.
The root cause should be: in the corrupted inode, there is a direct node
which has the same ino and nid in its footer, so in f2fs_do_truncate_blocks(),
after f2fs_get_dnode_of_data() finds such dnode:
1) ADDRS_PER_PAGE(dn.node_folio, inode) will return 923
2) once dn.ofs_in_node points to addr[923, 1017]
Then it will trigger the system panic.
Let's introduce NODE_TYPE_NON_IXNODE to indicate current node should
not be an inode or xattr node, and then use it in below path to detect
inconsistent node chain in inode mapping table:
- f2fs_do_truncate_blocks
- f2fs_get_dnode_of_data
- f2fs_get_node_folio_ra
- __get_node_folio
- f2fs_sanity_check_node_footer
- case NODE_TYPE_NON_IXNODE -> check whether it is inode|xnode |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix incorrect FI_NO_EXTENT handling in __destroy_extent_node()
When __destroy_extent_node() sets the inode flag FI_NO_EXTENT, it does
not reset the length of the largest extent to 0 and update the inode
folio. Since modifications to the extent tree are disallowed afterward,
the cached largest extent may become stale. This can trigger the
following error in xfstests generic/388:
F2FS-fs (dm-0): sanity_check_extent_cache: inode (ino=1761) extent info [220057, 57, 6] is incorrect, run fsck to fix
In the f2fs_drop_inode path, __destroy_extent_node() does not need to
guarantee that et->node_cnt is 0, because concurrency with writeback
is expected in this path, and writeback may update the extent cache.
This patch reverts commit ed78aeebef05 ("f2fs: fix node_cnt race between
extent node destroy and writeback"), and remove the unnecessary zero
check of et->node_cnt. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix potential use-after-free in exfat_find_dir_entry()
In exfat_find_dir_entry(), the buffer_head obtained from
exfat_get_dentry() is released with brelse(bh) before the fall-through
TYPE_EXTEND branch reads the directory entry through ep (which points
into bh->b_data):
brelse(bh);
if (entry_type == TYPE_EXTEND) {
...
len = exfat_extract_uni_name(ep, entry_uniname);
...
}
After brelse() drops our reference, nothing guarantees that the
underlying page backing bh->b_data remains valid for the subsequent
exfat_extract_uni_name() read. This is the same pattern fixed in
commit fc961522ddbd ("exfat: Fix potential use after free in
exfat_load_upcase_table()").
Move brelse(bh) so it runs after ep is no longer dereferenced on
each branch.
Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y
+ CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image
(long filename with same-hash collisions forcing the TYPE_EXTEND path).
With a debug-only invalidate_bdev() inserted between brelse(bh) and
the ep read to make the stale-deref window deterministic, the
unpatched kernel faults:
BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0
BUG: unable to handle page fault for address: ffff88801a5fa0c2
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0
With this patch applied, the same instrumented harness completes
cleanly under the same sanitizer stack. I have not reproduced a
crash on an uninstrumented kernel under ordinary reclaim; the
instrumented A/B establishes the lifetime violation and that the
patch closes it, not an unaided triggerability claim. |
