| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Botslab G980H dash camera firmware does not adequately verify the authenticity of firmware updates. The update process retrieves firmware through an unprotected connection and relies on an integrity value supplied with the firmware instead of a trusted cryptographic signature. A suitably positioned attacker who intercepts a firmware download, or an authenticated attacker who submits a crafted update, could install modified firmware and execute unauthorized code on the device. |
| mport is the MidnightBSD Package Manager. Prior to 2.7.8, ping() in libmport/ping.c accepted ICMP replies without validating icmp_id or icmp_seq and parsed the reply using a fixed IP-header offset instead of ip_hl. A network attacker able to inject or spoof visible ICMP replies could influence mirror latency selection, while a malformed packet carrying IP options could shift the ICMP header and trigger an out-of-bounds read. This issue is fixed in version 2.7.8. |
| authentik is an open-source identity provider. Prior to 2026.2.7, 2026.5.7, and 2026.8.2, an authentik SAML Source verifies an assertion's signature and validity period but does not ensure that the identity provider issued the assertion for that Source or in response to a login request from that Source. The SAML Source also does not record already accepted assertions, allowing replay. An unauthenticated actor who possesses such a valid assertion can use an assertion intended for another service provider or reuse an earlier assertion to authenticate as the user named by the assertion. Only SAML Sources are affected; SAML Providers and other Source types are not affected. This issue is fixed in versions 2026.2.7, 2026.5.7, and 2026.8.2. |
| In NLnet Labs Unbound 1.13.2 up to and including 1.26.1, a vulnerability in ZONEMD configured zones (zonemd-check: yes) which are located below (but not at) a trust anchor allow for an attack window where (tampered with) zone contents are served (or stored to disk) prior to the ZONEMD integrity check. This is caused by the needed DS/DNSKEY asynchronous resolution that needs to happen before the ZONEMD check completes. If a zonefile is written to disk (zonefile: option) while the ZONEMD check failed, the tampered data are reloaded on startup and available until ZONEMD verification concludes again. If verification fails, the data is not served any more but still persists on disk for future reloads. |
| A weakness has been identified in ag-ui-protocol ag-ui 1.0. The impacted element is the function prepareRunAgentInput of the file agent/agent.ts of the component Event Application Layer. This manipulation of the argument TEXT_MESSAGE_START causes origin validation error. Remote exploitation of the attack is possible. The pull request to fix this issue awaits acceptance. |
| SolarWinds Observability Self-Hosted was found to be affected by an unauthenticated remote code execution vulnerability due to the insufficient integrity checks. Installations configured in a non-default and non-secure configuration are affected. |
| An HTTP endpoint intended for provisioning enterprise and reseller organisations is reachable without any session. The authentication middleware is bound only to an explicit list of controllers, and the enterprise controller is not on that list, so no authentication runs for these routes.
The endpoint's only check is that the request body carries a token bearing a valid signature from the instance secret. It does not check what that token was issued for. Login tokens are signed with the same secret and carry no purpose, audience or expiry claim, so an ordinary user's own session token satisfies the check.
Presented with such a token, the endpoint creates a new organisation holding the highest subscription tier, flagged as lifetime and with a channel allowance far above any sold plan, creates an organisation-owner account alongside it, and returns the new organisation's API key in the response body. That key is immediately valid against the public API. |
| Joplin is an open source note-taking and to-do application that organises notes and lists into notebooks. Prior to 3.7.2, Joplin Desktop for Windows omits publisherName from packages/app-desktop/package.json, so the generated app-update.yml causes NsisUpdater.verifySignature() to skip comparison of a downloaded update's Authenticode signer with Joplin's signer. An attacker who controls the update delivery path can replace the update metadata and installer, and the client accepts an installer signed by another publisher or left unsigned after the user approves installation. Successful exploitation runs attacker-controlled code with the user's privileges and can compromise notes, credentials, and local data. This issue is fixed in version 3.7.2. |
| UrlUtil.getBaseUrl builds the absolute URLs in a response — download links, icons, asset and API URLs — from the X-Forwarded-Host, X-Forwarded-Proto and X-Forwarded-Prefix request headers, with no check on whether the sender was a trusted proxy, falling back to the client-supplied Host header.
Those responses are cached under keys that do not include the host (extension.json since 0.6.0, namespace.details.json since 0.9.0, sitemap since 0.14.5, latest.extension.version.vscode since 0.34.2). A single request carrying a forged header therefore places attacker-chosen URLs into an entry served to every other client for the lifetime of that entry — one hour by default, and cluster-wide where ovsx.redis.enabled is set.
The VSIX download URL, its signature URL and the public key URL are all derived from the same base URL, so extension signing does not limit the impact: an attacker who poisons an entry supplies the package, the signature over it, and the key used to verify it.
Exploitability depends on deployment topology. A server reachable directly by clients, or fronted by a proxy that relays the client's X-Forwarded-Host rather than overwriting it, is exploitable by an unauthenticated remote attacker. A proxy that overwrites the header is not.
An unauthenticated attacker can poison Open VSX's per-extension metadata cache with attacker-controlled download, signature, and public-key URLs by supplying a crafted X-Forwarded-Host header, causing downstream VS Code-compatible editors to fetch and install a malicious VSIX.
Workarounds (unpatched versions)
1. Configure the reverse proxy to set rather than relay X-Forwarded-Host, X-Forwarded-Proto and X-Forwarded-Prefix — note that nginx's $host is the client's Host header and is not a safe value.
2. Ensure the server is not reachable except through that proxy.
3. Flush the caches afterwards; poisoned entries survive the configuration change. |
| libp2p is a JavaScript implementation of the libp2p networking stack. From 8.0.0 until 12.0.24, @libp2p/peer-store in packages/peer-store/src/index.ts uses consumePeerRecord to verify a RecordEnvelope signature but does not require PeerRecord.peerId in the signed payload to equal the signer peer ID derived by RecordEnvelope.openAndCertify. The expectedPeer option checks only the envelope signer, and the gossipsub Peer Exchange path can provide the attacker's own peer ID as expectedPeer. An attacker can therefore sign a record with the attacker's key, place a victim peer ID and attacker-controlled multiaddrs in the payload, and have certified addresses stored for the victim. The poisoned addresses can cause address-book corruption, dial redirection or failure, routing manipulation, and reachability disruption, although the connection upgrade still verifies remote peer identity and prevents a complete identity takeover. The issue is fixed in version 12.0.24. |
| mport is the MidnightBSD Package Manager. Prior to 2.7.8, the mport_fetch_index(), mport_fetch_bootstrap_index(), and mport_fetch_bundle() paths in libmport/fetch.c accepted non-HTTPS repository and package mirror URLs without a url_is_https() enforcement check. When a cleartext URL was configured or returned by mirror data, a network-positioned attacker could tamper with package index or package download traffic and compromise package selection or integrity. This issue is fixed in version 2.7.8. |
| The Payment Gateway for PayPal on WooCommerce WordPress plugin before 9.2.1 does not verify that an incoming payment notification was confirmed in the store's configured payment environment or paid to the store's own merchant account before marking an order complete, allowing unauthenticated users to mark their own orders as paid using a genuine transaction from a payment sandbox they control. |
| AnyCable is a realtime server for reliable two-way communication that supports any backend. Prior to 1.6.15, the Pusher-compatible REST API in pusher/http.go includes the caller-supplied body_md5 value in the HMAC input but does not calculate the digest of the received request body or compare it with the signed value. An attacker who obtains a legitimate signed POST request can retain its query parameters and auth_signature while replacing the body, causing Handler and handleEvents to accept and broadcast attacker-selected event content. The absence of an auth_timestamp freshness check also allows the captured signature to be replayed indefinitely. This can forge server-side events, modify application state, or deliver attacker-controlled messages to WebSocket clients within the signed request's application context. This issue is fixed in version 1.6.15. |
| Insufficient Verification of Data Authenticity vulnerability in WP ManageNinja LLC FluentAuth allows Identity Spoofing.
This issue affects FluentAuth: from n/a through 2.1.2. |
| Insufficient verification of data authenticity in Azure Billing allows an unauthorized attacker to elevate privileges over a network. |
| Faust.js is a headless WordPress toolkit. Prior to 1.8.11, the FaustWP WordPress plugin authenticates only the ciphertext in its token envelope and excludes the 16-byte initialization vector from the HMAC in WPE\FaustWP\Auth\encrypt() and WPE\FaustWP\Auth\decrypt() in plugins/faustwp/includes/auth/functions.php. A logged-in non-administrator who obtains an authorization code from GET /generate can modify the unauthenticated initialization vector so that CBC decryption changes the token type and user identifier while the HMAC remains valid. This can produce an access token for an Administrator and permit full WordPress REST API access, administrator-account creation, plugin installation, and arbitrary code execution. This issue is fixed in repository version 1.8.11. |
| mport is the MidnightBSD Package Manager. Prior to 2.7.8, the mport_fetch_bootstrap_index() function in libmport/fetch.c could return success when bootstrap index hash verification encountered a missing or invalid hash because the failure path did not preserve a fatal result. A network attacker or compromised mirror able to alter bootstrap index content or its transport path could therefore cause mport to proceed with an unverified or tampered bootstrap package index. This issue is fixed in version 2.7.8. |
| MythicalDash is a Pterodactyl client area. In 3.5.4-aurora and earlier, GET /api/stripe/process in backend/app/Api/System/Gateways/Stripe.php creates a pending row in mythicaldash_stripe_payments before Stripe checkout succeeds and embeds the payment code in the success redirect, while GET /api/stripe/processed accepts that code without constructing a Session, checking ownership, or retrieving the Stripe Checkout Session to require payment_status to be paid and amount_total to match the expected charge. An ordinary authenticated user can request an attacker-selected coins amount, abandon or fail payment, and submit the pending code directly to the unauthenticated processed endpoint. StripeDB::isPending() then permits User::addCreditsAtomic() to grant the unpaid amount and mark the row processed even though Stripe has not confirmed payment. This permits arbitrary free virtual-currency top-ups and direct financial loss through consumption of hosting resources. No fixed version is available as of this review. |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, Netty's `DnsResolveContext` insufficiently validates the bailiwick of NS records, enabling DNS Cache Poisoning. An attacker controlling an authoritative name server for a subdomain can poison the cache for parent domains (like `.co.uk`). In `io.netty.resolver.dns.DnsResolveContext.AuthoritativeNameServerList#add` method accepts any NS record from the AUTHORITY section as long as the record's name is a suffix of the questionName. Subsequently, the `handleWithAdditional` method caches the associated A records from the ADDITIONAL section directly into the `authoritativeDnsServerCache` under the parent domain's key. This bypasses standard bailiwick rules, where a server authoritative for a subdomain should not be trusted to provide authoritative records for its parent. The poisoned cache is then used for all future resolutions under the parent domain's key. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, Netty's DnsResolveContext fails to validate the origin (bailiwick) of CNAME records in DNS responses. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
