| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: use wiphy work for socket owner autodisconnect
nl80211_netlink_notify() walks the cfg80211 wireless device list when a
NETLINK_GENERIC socket is released. If the socket owns a connection, the
notifier queues the embedded wdev->disconnect_wk work item.
That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a
NETLINK_URELEASE notifier that already observed conn_owner_nlportid can
queue it after that cancel returns. _cfg80211_unregister_wdev() then
removes the wdev from the list and waits for RCU readers, but
synchronize_net() does not drain work queued by such a reader.
Make the autodisconnect work a wiphy_work instead. The callback already
needs the wiphy mutex, and wiphy_work runs under that mutex. This lets
teardown cancel pending autodisconnect work while holding the mutex,
without a cancel_work_sync() vs. worker locking concern.
Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any
NETLINK_URELEASE notifier that had already reached the wdev list has then
either queued the work and it is removed, or can no longer find the wdev. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Fix VF CCS attach/detach race with in-flight BO moves
xe_bo_move() attaches VF CCS read/write batch buffers (BBs) to a BO
after it transitions NULL/SYSTEM -> TT, and detaches them after it
transitions TT -> SYSTEM. Both operations were done synchronously on
the CPU immediately after building the move's copy/clear fence,
without waiting for that fence to signal. This creates two races with
VF migration:
- Attach happens too late relative to the copy job it is meant to
protect. If the copy job is submitted before the CCS BBs are
attached, a VF migration event that pauses execution mid-copy can
observe partially copied CCS metadata without the attach state
needed to correctly save/restore it.
- Detach happens too early relative to the copy job that moves data
out of TT. The CCS BBs are torn down right after the copy fence is
obtained, while the actual blit may still be in flight. A VF
migration event that pauses execution mid-copy can then race the
save/restore path against the still-running blit, and the CCS BBs
it would need to make sense of the paused state have already been
removed.
Fix both races:
- Move the attach call to before the copy/clear job is submitted, so
the CCS BBs are already registered by the time the copy runs. On
attach failure, unwind and bail out of the move. xe_migrate_ccs_rw_copy()
now takes the destination resource explicitly, since bo->ttm.resource
is not updated to the new resource until after the move commits.
- Detach only after explicitly waiting for the copy fence to signal,
instead of tearing down the CCS BBs immediately after obtaining it.
While here, also fix xe_sriov_vf_ccs_attach_bo() to properly unwind and
propagate errors: the per-context loop previously never broke out on
error, silently discarding earlier failures. Unwind by clearing each
attached context directly via xe_migrate_ccs_rw_copy_clear() instead of
reusing xe_sriov_vf_ccs_detach_bo(), which requires both contexts to be
attached before it will clean up either one.
(cherry picked from commit d45ad0aa7a1eb5d7288b5ed948b05695611dc39e) |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: avoid fanout hook re-registration after unregister
packet_set_ring() temporarily detaches a socket from packet delivery while
reconfiguring its ring. It records the previous running state, clears
po->num, unregisters the protocol hook when needed, drops po->bind_lock,
and later restores po->num and re-registers the hook from the saved
was_running value.
That unlocked window can race with NETDEV_UNREGISTER. The notifier can
observe the socket as not running, skip __unregister_prot_hook(), and
invalidate the per-socket binding by setting po->ifindex to -1 and clearing
po->prot_hook.dev. A one-member fanout group can still retain its shared
fanout hook device pointer. When packet_set_ring() resumes, re-registering
solely from the stale was_running state can re-add the fanout hook after
the device has been unregistered.
Treat po->ifindex == -1 as an invalidated binding after reacquiring
po->bind_lock. This is distinct from ifindex 0, the normal
unbound/wildcard state: ifindex -1 marks an existing device binding that
was invalidated when the device was unregistered. Restore po->num as
before, but do not re-register the hook if device unregister already
detached the socket. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Wait for completion instead of returning early in iommu_completion_wait()
need_sync is a per-IOMMU flag shared by all domains and devices behind
that IOMMU. It is set whenever a command is queued with sync == true and
cleared when a completion-wait (CWAIT) command is queued. However, a
cleared need_sync only means that a covering CWAIT has been queued, not
that all previously queued commands have actually completed in hardware.
iommu_completion_wait() read need_sync locklessly and returned early
when it was false. This breaks the "block until all previously queued
commands have completed" contract in a multi-CPU scenario:
CPU2: queue inv-B => need_sync = true
CPU1: queue CWAIT(N); need_sync = false; then wait_on_sem(N)
CPU2: read need_sync == false => return 0 (no wait!)
CPU2 returns without waiting for any sequence number even though its
inv-B may not have completed yet (CWAIT(N), queued after inv-B, has not
been signaled). CPU2 then proceeds to, for example, free page-table
pages while the IOMMU can still walk stale translations, opening a
use-after-free window. This is a logical race in the meaning of the
flag, not a memory-visibility issue, so barriers alone do not help.
Fix it without losing the optimization of avoiding redundant CWAIT
commands: take iommu->lock before testing need_sync, and when it is
false do not return early but wait for the last allocated sequence
number (cmd_sem_val). Since need_sync == false implies no sync command
was queued after the last CWAIT, that CWAIT is FIFO-ordered after every
not-yet-completed command, so waiting for its sequence number guarantees
all prior commands (possibly queued by another CPU) have completed. The
common path with pending work is unchanged and no extra hardware command
is issued. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Move src_buf Removal to finish_encode
During encoder processing, there is a case where the IRQ response could
return the buffer back to userspace via v4l2_m2m_buf_done call. In this
time, userspace could queue up this same buffer before start_encode removes
the index from the ready queue. This would then lead to a case where the
buffer in the ready queue could be a self loop due to the
WRITE_ONCE(prev->next, new) call in __list_add.
When __list_del is finally called, the loop is already made so nothing
points back to ready queue list head and pointers are poisoned.
A buffer should not be marked as DONE before the buffer is removed from
m2m ready queue. Move removal entirely to finish_encode. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: wait on ublk_dev_ready() instead of ub->completion
ub->completion is only re-armed by a successful START_USER_RECOVERY. If
the ublk server sends END_USER_RECOVERY without one - e.g. its START
failed with -EBUSY and the error was ignored - the wait is satisfied by
the stale completion of the previous recovery cycle, and the device is
marked LIVE and the requeue list kicked while the FETCH stream is still
running and ubq->canceling is still set. The kick redispatches a
previously requeued request, __ublk_queue_rq_common() sees ->canceling
and parks it again via __ublk_abort_rq(), and after the last FETCH
clears ->canceling nothing ever kicks the requeue list again: the
request is stranded there while holding its tag. If it is the flush
machinery's flush_rq, every subsequent fsync piles up in uninterruptible
sleep and teardown hangs on tag draining. This matches a report of a
lost PREFLUSH with ext4 on top of ublk after daemon crash recovery.
ub->completion is an edge-triggered latch used as a proxy for the level
condition "every queue has fetched all I/O commands", which can regress
(F_BATCH's UNPREP, daemon death) and whose re-arm can be skipped. Drop
it and wait on the real condition instead: the new helper
ublk_wait_dev_ready_and_lock() waits on ublk_dev_ready() via
wait_var_event_interruptible(), woken from ublk_mark_io_ready(), then
re-checks it under ub->mutex, waiting again on regression, and returns
with the mutex held and readiness guaranteed.
Readiness becomes true in the same ub->mutex critical section that
clears the last queue's ->canceling, so END_USER_RECOVERY marks the
device LIVE and kicks the requeue list strictly after ->canceling
clears. The wait stays interruptible, so a server whose daemon died can
still be signalled out. For ublk_ctrl_start_dev() this replaces the
fail-fast -EINVAL on an F_BATCH ready->UNPREP regression with waiting
until the device is ready again. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn4: avoid rereading IB param length
Reuse the parameter length returned by
vcn_v4_0_enc_find_ib_param() instead of rereading it from
the IB.
This avoids a potential TOCTOU issue if the IB contents
change between reads.
(cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: reject mapping a reserved doorbell to a new queue
When creating an user-queue, the user space
provides a doorbell BO handle and an offset within
the bo to obtain a doorbell.
However current implementation using xa_store_irq()
to store a doorbell, which allows a later queue created
with the same BO and offset parameters to overwrite an
existing queue and doorbell mapping.
This can cause problems like misrouting fence IRQ
processing to a wrong queue, and mislead the cleanup
process of one queue erasing the mapping of another queue.
This commit fixes this issue by replacing xa_store_irq with
xa_insert_irq, which rejects mapping a reserved
doorbell to a newly created queue
(cherry picked from commit 6244eae22966350db52faf9c1369d3b2ffc5de4e) |
| vLLM is an inference and serving engine for large language models. From 0.20.2rc0 until 0.26.0, safe_load_prompt_embeds in vllm/renderers/embed_utils.py uses torch.sparse.check_sparse_tensor_invariants, whose process-global save, enable, and restore state can be raced by concurrent prompt_embeds parts submitted to POST /v1/chat/completions through AsyncMultiModalItemTracker.resolve_items, asyncio.gather, and the default executor, allowing an invalid sparse tensor to reach tensor.to_dense despite the CVE-2025-62164 guard when enable_prompt_embeds is enabled. This issue is fixed in version 0.26.0. |
| A TOCTOU (Time-of-Check Time-of-Use) vulnerability in GNU tar's incremental dumpdir 'X' rename handling allows a local attacker with write access to a directory being backed up to influence the restore process if the attacker has access to the system where the restore is being performed. During restoration, files or directories may be created, renamed or overwritten outside the intended extraction directory. This could lead to unauthorized file modification or, in some cases, privilege escalation. Exploitation does not require the attacker to modify or craft the archive, and standard backup and restore workflows—including extracting into a newly created directory without using the -P option do not mitigate the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix adapter deregistration race
Adapters can be looked up by their id using i2c_get_adapter() which
takes a reference to the embedded struct device.
Remove the adapter from the IDR before tearing it down during
deregistration (and on registration failure) to make sure its resources
are not accessed after having been freed (e.g. the device name). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Disable AVIC IPI virtualization on Hygon Family 18h (erratum #1235)
Hygon Family 18h CPUs are derived from AMD Family 17h (Zen1) silicon and
share the same erratum #1235: hardware may read a stale IsRunning=1 bit
during ICR write emulation and silently fail to generate an
AVIC_IPI_FAILURE_TARGET_NOT_RUNNING VM-Exit on the sending vCPU.
The absence of the VM-Exit causes KVM to miss the required wakeup of
blocking target vCPUs, leading to hung vCPUs and unbounded delays in
guest execution.
Extend the existing AMD Family 17h erratum #1235 workaround to also cover
Hygon Family 18h. With IPI virtualization disabled, KVM never sets
IsRunning=1 in the Physical ID table, so every non-self IPI generates a
VM-Exit and is correctly emulated. |
| An authorization bypass vulnerability in LXD due to a timing flaw during configuration merging allows an authenticated attacker to bypass target project restrictions during cross-project instance copies. When copying an instance to a target project, LXD performs restriction checks before configuration merging is complete, creating a time-of-check to time-of-use (TOCTOU) condition. An attacker can exploit this flaw to copy instances with disallowed high-privilege configurations into restricted projects, bypassing security controls. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs, afs: Fix write skipping in dir/link writepages
Fix netfs_write_single() and afs_single_writepages() to better handle a
write that would be skipped due to lock contention and WB_SYNC_NONE by
returning 1 from netfs_write_single() if it skipped and making
afs_single_writepages() skip also. If a skip occurs, the inode must be
re-marked as the VFS may have cleared the mark.
This is really only theoretical for directories in netfs_write_single() as
the only path to that is through afs_single_writepages() that takes the
->validate_lock around it, thereby serialising it. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ap: use generic driver_override infrastructure
When the AP masks are updated via apmask_store() or aqmask_store(),
ap_bus_revise_bindings() is called after ap_attr_mutex has been
released.
This calls __ap_revise_reserved(), which accesses the driver_override
field without holding any lock, racing against a concurrent
driver_override_store() that may free the old string, resulting in a
potential UAF.
Fix this by using the driver-core driver_override infrastructure, which
protects all accesses with an internal spinlock.
Note that unlike most other buses, the AP bus does not check
driver_override in its match() callback; the override is checked in
ap_device_probe() and __ap_revise_reserved() instead.
Also note that we do not enable the driver_override feature of struct
bus_type, as AP - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n".
Additionally, AP has a custom counter that is modified in the
corresponding custom driver_override_store(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Handle torn-down topology gracefully in drm_dp_mst_topology_queue_probe()
A hotplug or link-loss event can tear down the MST topology
(setting mgr->mst_state = false and mgr->mst_primary = NULL) concurrently
with a caller invoking drm_dp_mst_topology_queue_probe(). Since the check
is already performed under mgr->lock, the condition is not a programming
error but a valid race -- the topology was valid when the caller decided
to call this function, but was torn down before the lock was acquired.
Replace the drm_WARN_ON() with a graceful early return. This eliminates
spurious kernel warnings and the resulting compositor crashes observed
when connecting/disconnecting DP MST monitors, while keeping the correct
behavior of doing nothing when MST is not active. A drm_dbg_mst() trace
is added so the skipped probe remains observable under MST debug logging.
The existing WARN_ON(mgr->mst_primary) in drm_dp_mst_topology_mgr_set_mst()
already catches the case where the topology is initialized twice, so no
diagnostic coverage is lost. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata()
The TX metadata area resides in the UMEM buffer which is memory-mapped
and concurrently writable by userspace. In xsk_skb_metadata(),
csum_start and csum_offset are read from shared memory for bounds
validation, then read again for skb assignment. A malicious userspace
application can race to overwrite these values between the two reads,
bypassing the bounds check and causing out-of-bounds memory access
during checksum computation in the transmit path.
Fix this by reading csum_start and csum_offset into local variables
once, then using the local copies for both validation and assignment.
Note that other metadata fields (flags, launch_time) and the cached
csum fields may be mutually inconsistent due to concurrent userspace
writes, but this is benign: the only security-critical invariant is
that each field's validated value is the same one used, which local
caching guarantees. |
| Time-of-check time-of-use race condition for the Intel(R) NPU Driver for Windows for all versions within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| In the Aimeos Pagible content management system prior to version 0.10.4, the administrative proxy route (`cmsproxy`) is vulnerable to a Server-Side Request Forgery (SSRF) attack via DNS Rebinding. A Time-of-Check to Time-of-Use (TOCTOU) race condition exists between the URL validation phase and the actual HTTP request phase, allowing attackers to access internal network resources and cloud metadata endpoints. Version 0.10.4 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/khugepaged: write all dirty file folios when collapsing
[There is no upstream commit, as this code was removed by upstream
commit 044925f9b565 ("mm: fs: remove filemap_nr_thps*() functions and their users")]
As-is, khugepaged and writable-file opening exclude each other. A file
cannot be open writeable and have THPs (because the filesystem is not aware
of them). khugepaged will never collapse file pages for files that are
opened writeable. On an open(O_RDWR/O_WRONLY), the page cache for that
particular file is dropped. This is fine because nothing could've been
dirtied.
However, there is an edge-case: collapse_file() might not be able to
coexist with concurrent writers, but it can coexist with dirty folios
(from previous writers). Therefore, the following can happen:
open(file, O_RDWR)
write(file)
close(file)
madvise(file_mapping, MADV_COLLAPSE, some non-dirty range)
open(file, O_RDWR)
nr_thps > 0
truncate_inode_pages()
/* THPs are cleared out, but so are the dirty folios */
When this edge-case happens, there is data loss, as the dirty folios are
fully discarded.
Fix it by fully writing back the page cache (and waiting) when collapsing
file THPs. Doing so provides the guarantee that no dirty folio will be
observed while there are active THPs. To fully ensure this is safe, the
invalidate_lock needs to be held while doing the writeout, so that
do_dentry_open()'s page cache truncation excludes this write-and-wait.
As a side effect, move the nr_thps counter bumping outside the i_pages
lock. This is correct since the counter itself is an atomic_t and the
producer <-> consumer correctness is provided by a full memory barrier:
smp_mb() in collapse_file()/memory barrier implied by full ordering in
get_write_access() -> atomic_inc_unless_negative(). |
