| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix transaction overflow during writeback
Commit 95ad8ee45cdb ("ext4: correct the reserved credits for extent
conversion") was correct to note that we need to reserve enough credits
for all extents possibly underlying a large folio. However it was too
eager to reduce the number of reserved credits. Extent conversion may
not only need to touch several leaf extent blocks, it may also need to
split extents - for example a single large unwritten extent may need to
be split into many small written ones in case of sparse folio dirtying.
This can thus result not only in extent leaf modifications but also in a
need to allocate new extent tree nodes. As a result the reserved
transaction credits were not sufficient in some corner cases. Use
ext4_meta_trans_blocks() for correct upper bound credit estimate. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mei: pass correct argument to function
The first argument to iwl_mei_write_cyclic_buf() should be the cldev
but the q_head pointer is passed instead. Fix it. |
| A weakness has been identified in mathurvishal CloudClassroom-PHP-Project up to 5dadec098bfbbf3300d60c3494db3fb95b66e7be. The impacted element is an unknown function of the file loginlinkfaculty.php of the component Faculty Authentication. Executing a manipulation of the argument fid/pass can lead to sql injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The vendor was contacted early about this disclosure but did not respond in any way. |
| NVIDIA NeMo Speech for all platforms contains a vulnerability in the speech data explorer component, where malicious data created by an attacker could cause remote code execution. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA NeMo Speech for all platforms contains a vulnerability where malicious input created by an attacker could cause a code injection. A successful exploit of this vulnerability might lead to code execution, information disclosure, and data tampering. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's CPython bytecode .pyc marshal parser was vulnerable because the CPython marshal readers accepted a 32-bit string length without rejecting values that overflow the size-plus-one allocation. The vulnerability is triggered by opening or inspecting a crafted .pyc file through r2 or rabin2. A length of 0xffffffff wrapped the allocation to zero before the common byte reader wrote attacker-controlled data and fill bytes beyond the heap allocation. This can cause heap memory corruption and denial of service; arbitrary code execution is possible but has not been demonstrated. This issue is fixed in version 6.2.0. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's ELF PN_XNUM handling was vulnerable because the ELF parser allocated the program-header array using the resolved PN_XNUM count but several consumers still iterated with the original e_phnum value of 65535. The vulnerability is triggered by processing a crafted ELF file with e_phnum = 0xffff and a much smaller resolved count in shdr[0].sh_info. Consumers iterated beyond the allocated program-header array. This can cause a heap out-of-bounds read and process termination, resulting in denial of service; memory disclosure and code execution have not been demonstrated. This issue is fixed in version 6.2.0. |
| A vulnerability in an API of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass authentication.
This vulnerability is due to insufficient authentication control on an API endpoint. An attacker could exploit this vulnerability by sending a crafted request to an affected API endpoint. A successful exploit could allow the attacker to gain unauthorized access to the affected device by bypassing the web-based management interface. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Mach-O Swift field-metadata parser was vulnerable because a relative Swift field pointer could be lower than the field-metadata section base, making subtraction produce a negative logical index. The vulnerability is triggered by parsing Swift type and class metadata from a crafted Mach-O file. The derived index was used to read four bytes immediately before the allocated field-metadata buffer. This can cause incorrect metadata processing or process termination; no attacker-observable memory disclosure has been demonstrated. This issue is fixed in version 6.2.0. |
| In Progress WhatsUp Gold prior to version 21.1.0, an application endpoint failed to adequately sanitize malicious input. which could allow an unauthenticated attacker to execute arbitrary code in a victim's browser. |
| A security flaw has been discovered in zhistaredu StarTraining up to 3.8.1. The affected element is an unknown function of the file SecurityConfig.java of the component api-docs Endpoint. Performing a manipulation results in missing authentication. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_ring: fix stale descriptor flags after a failed packed add
In a packed ring the AVAIL and USED bits sit in the descriptor itself,
so writing them makes that descriptor available. Those bit combinations
flip meaning on every round of the ring, tracked by a wrap counter, so
invalidating or validating a descriptor means inverting both bits.
Commit 1ce9e6055fa0 ("virtio_ring: introduce packed ring support") has
virtqueue_add_packed() make every descriptor of a chain available as it
maps the chain, and write the head last. The device consumes the ring in
order and stops at a head that is not available yet, so it never reaches
the rest.
When vring_map_one_sg() fails partway, unmap_release unmaps the segments
and restores avail_used_flags, but the descriptors it wrote to in the
ring stay marked with AVAIL and USED bits. The head is now the only
entry that keeps the device from consuming these stale entries.
For example, the ring would look like this now.
Z - pre-previous command
A - previous command
B - aborted command
C - current command
[A1 DONE] [A2 DONE] <C1 EMPTY> [B2] [B3] [Z1 DONE]
When the driver now attempts to issue the C command, the next add starts
at the same head as B. If C spans less descriptors than B, there is no
end marker because AVAIL and USED bits were still in place. And that
means the device will start interpreting these stale entries (B2/B3) as
another command entry, which then blocks the queue.
This effect typically happens in swiotlb configurations under memory
pressure, because vring_map_one_sg() can then fail with larger I/O
requests which then leads to command abortions.
There are broadly 2 ways to avoid leaving those flags behind:
1) Defer those flags too until the chain is complete.
2) Rewrite those flags for the previous wrap counter.
Implement the second option in both packed add paths. The first option
traverses the chain a second time on every successful add. The second
option invalidates all added descriptors when any add fails.
With this patch applied, a packed virtqueue keeps completing requests
after a failed add. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (ltc4282) Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
ltc428_clk_provider_setup() does not fill in any parent clocks, and
assumes that init.num_parents is NULL. However, the latter in
uninitialized, and thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/riscv: Serialize command queue publishing
Serialize command queue publishing so software producer state advances only
after a command is written and the hardware tail is updated. Wait for
hardware consumption outside the queue lock when the command queue is full
so other CPUs are not blocked behind a long poll. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject non-scalar bpf_loop iteration counts
bpf_loop() declares its nr_loops argument as ARG_ANYTHING. Privileged
programs may pass pointer values to such arguments, so check_func_arg()
lets a pointer-valued R1 reach the helper-specific checks.
Since commit bb124da69c47 ("bpf: keep track of max number of bpf_loop
callback iterations"), the verifier marks R1 precise and reads its upper
bound to limit callback simulation. Precision backtracking only accepts
scalar registers, so passing a pointer instead triggers the "backtracking
misuse" verifier warning. Kernels with panic_on_warn enabled subsequently
panic.
Introduce ARG_SCALAR for helper arguments that only accept scalar values
and use it for bpf_loop() nr_loops. Generic helper argument validation then
rejects pointers before loop inlining and precision processing. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix NULL pointer dereference on unbind with fixed-link
When the device tree describes a fixed-link and has no "mdio" child
node, macb_mii_init() returns early without allocating the MDIO bus,
leaving bp->mii_bus as NULL.
Two cleanup paths then dereference this NULL bus:
1. On driver unbind, macb_remove() unconditionally calls
mdiobus_unregister(bp->mii_bus), which oopses:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000004a8
pc : mdiobus_unregister+0x14/0xa4
lr : macb_remove+0x38/0xa4
Call trace:
mdiobus_unregister+0x14/0xa4 (P)
macb_remove+0x38/0xa4
platform_remove+0x20/0x30
device_release_driver_internal+0x1c8/0x224
unbind_store+0xb4/0xbc
2. On the probe error path in macb_probe(), reached when
macb_mii_init() has succeeded but a subsequent step fails, the
err_out_unregister_mdio label runs the same unconditional cleanup.
mdiobus_unregister() and mdiobus_free() do not guard against a NULL
bus, so guard the calls in both macb_remove() and the probe error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: unregister debugfs entries on teardown
ucsi_register() creates per-instance debugfs entries, but
ucsi_unregister() keeps them around until ucsi_destroy().
Drivers like ucsi_glink that unregister/register the same UCSI
instance across remoteproc restart then try to create an already
existing debugfs directory and log:
debugfs: 'pmic_glink.ucsi.0' already exists in 'ucsi'
Unregister debugfs entries as part of ucsi_unregister(), and
clear ucsi->debugfs after freeing it so repeated unregister
paths remain safe. |
| FTM 4.x ALL could allow a remote authenticated attacker to obtain sensitive information due to an XML external entity injection flaw. |
| Paessler PRTG Network Monitor before version 26.2.120.1449 is affected by a reflected Cross-Site Scripting (XSS) vulnerability. When a request is made for a non-existent resource ending in \".htm\", the web interface returns an HTTP 403 \"Forbidden Path\" error page that echoes the requested URL path into the HTML response body without proper output encoding or sanitization.
An unauthenticated, remote attacker can craft a URL containing an HTML/JavaScript payload in the path (e.g. https:////welcome.htm) and, once a victim with an active PRTG session opens the crafted link, execute arbitrary JavaScript in the security context of the PRTG web interface. Because the PRTG session cookie is not protected with the HttpOnly attribute, successful exploitation allows the attacker to read and exfiltrate the victim's session cookie, potentially leading to session hijacking. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's binary property-list Unicode parser was vulnerable because the binary-property-list Unicode parser underallocated an uninitialized UTF-8 destination and did not guarantee NUL termination. The vulnerability is triggered by running the explicit pFB or pFBj commands on untrusted binary property-list data. The json encoder treated the converted data as a nul-terminated c string and could continue reading beyond the allocation. This can cause disclosure of uninitialized or adjacent heap contents in JSON output and possible process termination. This issue is fixed in version 6.2.0. |
