| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/proc: Use file_ns_capable() when checking config space read access
proc_bus_pci_read() decides how much of the config space is readable based
on capable(CAP_SYS_ADMIN), which checks the credentials of the task calling
read(), not the credentials of the process that opened the file.
The sysfs equivalent, pci_read_config(), has checked the credentials of the
opening process since commit de139a339395 ("pci: check caps from sysfs file
open to read device dependent config space"), so a privileged process can
open the config space file and pass the file descriptor to an unprivileged
process (for example, a process running a KVM guest with an assigned
device), which can then read the entire config space. The check was
subsequently routed through the LSM framework in commit 47970b1b2aa6 ("pci:
use security_capable() when checking capablities during config space read")
and converted to the dedicated helper in commit ab0fa82b2df9 ("pci-sysfs:
use proper file capability helper function").
Thus, the two interfaces check the same capability against different
credentials. Checking the credentials of the task calling read() makes the
outcome depend on who reads rather than who opened, so the restriction is
bypassed whenever a more privileged process reads through the descriptor.
Checking the credentials recorded in file->f_cred settles the decision at
open() time and ties it to the file, where it cannot change with the
caller.
Use file_ns_capable() to check CAP_SYS_ADMIN against the credentials in
effect when the file was opened, bringing the procfs interface in line with
the sysfs behaviour.
As a result, a file descriptor opened by a privileged process and passed to
an unprivileged one now allows the entire config space to be read through
procfs, matching sysfs. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: fix typec switch leak on probe error path
If probe fails after imx95_usb_phy_get_tca() succeeds, the typec
switch leaks because the only cleanup path was in .remove(), which
never runs on probe failure.
Use devm_add_action_or_reset() so the switch is cleaned up on both
probe failure and driver removal. The imx95_usb_phy_put_tca() is no
longer needed, it will be removed in .remove() too. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rkvdec: bound HEVC tile loops and PPS id to the array capacity
compute_tiles_uniform() and compute_tiles_non_uniform() loop over
num_tile_columns_minus1 + 1 / num_tile_rows_minus1 + 1 entries, and
assemble_hw_pps() writes one COLUMN_WIDTH / ROW_HEIGHT register per tile
and indexes priv_tbl->param_set[] by pic_parameter_set_id, all taken from
the untrusted PPS. Use the bounded v4l2_hevc_pps_num_tile_columns() /
v4l2_hevc_pps_num_tile_rows() helpers for the tile loops, and bail out of
assemble_hw_pps() before indexing priv_tbl->param_set[] with an
out-of-range pic_parameter_set_id, so the writes stay within the hardware
tables. |
| In the Linux kernel, the following vulnerability has been resolved:
of: fix out-of-bounds read in of_alias_scan() stem parser
The stem parser tests isdigit(*(end - 1)) before checking end > start
and so reads one byte before the property name when the name is empty
or all digits. Check the bound first. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Keep kick_sync waiting on the rq's own CPU
kick_sync_wait_bal_cb() assumes it runs on the rq's CPU from the
__schedule() tail: the snapshots it compares against live in that CPU's
percpu area and the busy-wait runs with the rq lock dropped and IRQs
enabled.
However, dispatch can now drop the rq lock while the callback sits queued,
and rq lock takers in that window (the sched class change paths, the scx
task iterator) flush pending balance callbacks on release, running the
callback on a foreign CPU. Such a run compares against unrelated snapshots
and can deadlock when the executing CPU is itself a wait target.
Bail on a foreign CPU and leave the wait state alone. The wait only observes
progress that the resched kicks already guarantee and the rq's next wait
picks up the stale cpus_to_sync bits. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Ensure SRAM region size matches job
It is possible for userspace to set the job SRAM size to 0, but then still
have SRAM accesses in the command stream. When the job SRAM size is 0,
setting the region base register is skipped and a stale base address from
a prior job is used.
Check the region size against the job's SRAM size instead of just the size
of the SRAM. The job's SRAM size was already checked against the total SRAM
size. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_owner: use memcg_data snapshot to avoid TOCTOU in print_page_owner_memcg()
print_page_owner_memcg() reads page->memcg_data via READ_ONCE() at the
start to guard against tail pages and NULL data. However, it later
re-reads page->memcg_data locklessly in two places:
1: page_memcg_check(page)
2: PageMemcgKmem(page) (via folio_memcg_kmem(), which includes
VM_BUG_ON assertions for tail pages and MEMCG_DATA_OBJEXTS)
If the page is concurrently freed and reallocated as a THP tail page or
slab page between these calls, the VM_BUG_ON assertions can trigger on
CONFIG_DEBUG_VM=y builds, crashing the kernel.
Fix both TOCTOU issues by using the memcg_data snapshot throughout. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: zero-initialize stack-allocated cifs_open_info_data
Stack-allocated cifs_open_info_data may contain random data.
This can make some fields have wrong value if they are not set later. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: remove stale namespaces by NSID range during scan
nvme_scan_ns_list() drops the stale namespaces in each gap in the
reported NSID list one NSID at a time. Every iteration calls
nvme_find_get_ns() to look the namespace up and removes it if it is
present. The loop runs once per NSID in the gap rather than once per
namespace actually present.
NSIDs are 32-bit, so a target with a sparse NSID space can make a
single gap spin the loop billions of times with nothing to remove.
watchdog: BUG: soft lockup - CPU#4 stuck for 26s!
Workqueue: nvme-wq nvme_scan_work [nvme_core]
RIP: 0010:__srcu_read_unlock+0xb/0x20
Call Trace:
nvme_find_get_ns+0x7d/0xb0 [nvme_core]
nvme_scan_ns_list+0xe8/0x280 [nvme_core]
nvme_scan_work+0x18a/0x280 [nvme_core]
process_one_work+0x197/0x380
worker_thread+0x2fe/0x410
kthread+0xe0/0x100
Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range()
and give it an open (start, end) NSID range. ctrl->namespaces is
sorted by NSID, so the whole gap is dropped in a single walk that
stops once end is reached. This bounds the work by the namespaces
that are present instead of by the size of the gap. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-fs: avoid double-free on failed queue setup
virtio_fs_setup_vqs() allocates fs->vqs and fs->mq_map before calling
virtio_find_vqs(). If virtio_find_vqs() fails, the error path frees both
pointers and returns an error to virtio_fs_probe().
virtio_fs_probe() then drops the last kobject reference, and
virtio_fs_ktype_release() frees fs->vqs and fs->mq_map again. This leaves
dangling pointers in struct virtio_fs and can trigger a double-free during
probe failure cleanup.
Set fs->vqs and fs->mq_map to NULL immediately after kfree() in the
virtio_fs_setup_vqs() error path so that the later kobject release sees an
uninitialized state and kfree(NULL) becomes harmless.
This can be reproduced when a broken virtio-fs device advertises more
request queues than the transport actually provides. In that case
virtio_find_vqs() fails while setting up the extra queue, and the probe
path reaches the double-free cleanup sequence. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: harden FRU PIA parsing with bounded helpers
Replace the open-coded TLV walk with fru_pia_advance()
and fru_pia_copy_field() helpers that bound every read
by the actual EEPROM data length, preventing out-of-bounds
reads on truncated or malformed FRU data. |
| ClipBucket v5 before 5.5.3-#182 contains a blind SQL injection vulnerability in the photo search endpoint where the query parameter is passed unsanitized into SQL WHERE and ORDER BY clauses. Unauthenticated attackers can exploit time-based blind SQL injection techniques to extract user credentials, email addresses, and administrator password hashes for account takeover. |
| In the Linux kernel, the following vulnerability has been resolved:
kasan: fix cache shrink race with CPU hotplug
kasan_quarantine_remove_cache() first invokes per_cpu_remove_cache() on
all online CPUs. Each callback moves objects belonging to the cache from
cpu_quarantine to the CPU's shrink_qlist, where they can later be freed
from task context.
kmem_cache_destroy() invokes the quarantine removal path while holding
cpus_read_lock(), but kmem_cache_shrink() does not. The latter can
therefore race with CPU offlining as follows:
kmem_cache_shrink() CPU hotplug
------------------- -----------
on_each_cpu()
CPU1 moves objects to
CPU1's shrink_qlist
on_each_cpu() returns
CPU1 goes offline
kasan_cpu_offline()
drains cpu_quarantine
leaves shrink_qlist untouched
for_each_online_cpu()
skips CPU1
The objects left on CPU1's shrink_qlist are not returned to the slab
allocator. This may prevent kmem_cache_shrink() from releasing slabs that
would otherwise become empty. If CPU1 remains offline, a later
kmem_cache_destroy() also skips the list and can report that the cache
still contains objects.
An intermittent occurrence was observed with a virtio-9p filesystem. The
mount and umount commands both returned 0, but the kernel logged the
following during the userspace-triggered teardown:
[ 2994.380134][ T111] BUG 9p-fcall-cache-1 (Tainted: G B ): Objects remaining on __kmem_cache_shutdown()
[ 2994.381140][ T111] Object 0xff11000004361118 @offset=4376
[ 2994.381607][ T111] Allocated in p9_fcall_init+0x201/0x400 age=19564 cpu=1 pid=104
[ 2994.382591][ T111] p9_fcall_init+0x201/0x400
[ 2994.382810][ T111] p9_tag_alloc+0x12f/0x700
[ 2994.382982][ T111] p9_client_prepare_req+0x102/0x3e0
[ 2994.383165][ T111] p9_client_rpc+0x1ab/0xa50
[ 2994.383334][ T111] p9_client_getattr_dotl+0xb0/0x1a0
[ 2994.383515][ T111] v9fs_vfs_getattr_dotl+0x115/0x360
[ 2994.383719][ T111] vfs_getattr_nosec+0x22c/0x3a0
[ 2994.383910][ T111] vfs_statx+0xd7/0x170
[ 2994.384062][ T111] vfs_fstatat+0x45/0x80
[ 2994.384215][ T111] __do_sys_newfstatat+0x84/0xe0
[ 2994.384386][ T111] do_syscall_64+0x115/0x6a0
[ 2994.384566][ T111] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2994.399720][ T111] WARNING: mm/slub.c:1244 at __kmem_cache_shutdown+0x363/0x500, CPU#0: busybox/111
[ 2994.405655][ T111] Call Trace:
[ 2994.406325][ T111] kmem_cache_destroy+0x73/0x1b0
[ 2994.406630][ T111] p9_client_destroy+0x271/0x3c0
[ 2994.407210][ T111] v9fs_session_close+0x3c/0x260
[ 2994.407409][ T111] v9fs_kill_super+0x48/0x90
[ 2994.407584][ T111] deactivate_locked_super+0xa3/0x160
[ 2994.407778][ T111] cleanup_mnt+0x1dd/0x3e0
Thus, a successful umount left objects in the 9p fcall cache and prevented
the cache from being destroyed cleanly.
Per-CPU shrink_qlist storage exists for every possible CPU, and each list
is protected by its own raw spinlock. Iterate over possible CPUs so that
a list populated before its CPU went offline is drained as well.
for_each_possible_cpu() can do more work than for_each_online_cpu(), but
this change only affects CONFIG_KASAN_GENERIC kernels. The extra work is
limited to cache shrink and cache destruction paths and does not affect
the normal allocation/free fast path. It adds one raw-spinlock-protected
scan of each possible CPU's shrink list. These lists are normally empty;
a non-empty list is traversed to remove objects belonging to the cache
being shrunk or destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: use skb_get() instead of skb_clone() for req_skb
BT enable fails intermittently with -ETIMEDOUT (-110). The kernel log
shows the HCI Read Local Version command was sent and the firmware
replied with status 0x00 (logged by hci_req_cmd_complete() BT_DBG),
but the waiter in __hci_cmd_sync_sk() never woke up and timed out
after 10 s:
bluetooth hci0: Opcode 0xfc00 // __hci_cmd_sync_sk
bluetooth hci0: opcode 0xfc00 plen 1 // hci_cmd_sync_add
bluetooth hci0: skb len 4 // hci_cmd_sync_alloc
bluetooth hci0: length 1 // hci_req_sync_run
Bluetooth: hci0 cmd_cnt 1 cmd queued 1 // hci_cmd_work
Bluetooth: hci0 type 1 len 4 // hci_send_frame
Bluetooth: opcode 0xfc00 status 0x00 // hci_req_cmd_complete
<-- req_skb NULL: req_complete_skb not set,
hci_cmd_sync_complete() never called,
req_status stays HCI_REQ_PEND -->
<-- 10 s later: wait_event_interruptible_timeout expires -->
bluetooth hci0: end: err -110 // __hci_cmd_sync_sk
The root cause is that hci_send_cmd_sync() clones the sent command
into hdev->req_skb so that hci_req_cmd_complete() can locate the
registered completion callback. Under memory pressure this
skb_clone() fails, leaving hdev->req_skb NULL. The firmware reply
is received and processed, but hci_req_cmd_complete() finds NULL
req_skb, so hci_cmd_sync_complete() is never called, req_status
stays HCI_REQ_PEND, and the waiter times out with -ETIMEDOUT.
req_skb is only used to read bt_cb(skb)->hci callbacks and opcode --
it is never modified. Replace skb_clone() with skb_get(), which
simply increments the reference count of hdev->sent_cmd without
allocating new memory and therefore cannot fail.
This issue was first observed as a use-after-free in ttyport_close()
when ttyport_open() failed, which was investigated in an earlier
patch series [1]. That investigation led to the discovery of the
true root cause described above.
[1] https://lore.kernel.org/all/20250430111617.1151390-1-quic_cxin@quicinc.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: harden DFS cache against invalid target hints
Currently, get_tgt_name() returns ERR_PTR(-ENOENT) when ce->tgthint is
NULL, and dfs_cache_noreq_update_tgthint() assumes ce->tgthint is always
valid.
In preparation for clearing ce->tgthint in free_tgts(), harden callers
of get_tgt_name() against ERR_PTR results and harden
dfs_cache_noreq_update_tgthint() against NULL pointer dereferences. |
| In the Linux kernel, the following vulnerability has been resolved:
cdx: Fix double free when sysfs file creation fails
In cdx_create_res_attr(), if sysfs_create_bin_file() fails, the code
frees res_attr but doesn't set cdx_dev->res_attr[num] to NULL. This
leaves a dangling pointer in the array. Then cdx_destroy_res_attr()
frees the already-freed memory. Fix the double free by initializing
cdx_dev->res_attr[num] after sysfs_create_bin_file() completes. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Keep refcount_acquire nullable for borrowed RCU kptrs
bpf_refcount_acquire() is fallible for a borrowed reference because the
object may have reached a zero refcount. The verifier therefore keeps
KF_RET_NULL on the return value unless the argument is an owning reference.
An RCU-protected load of a local kptr is marked MEM_ALLOC, but it only
receives NON_OWN_REF when the pointee contains a graph node. A refcounted
object without a graph node consequently looks like an owning reference
even though the loaded register has no acquired reference state. If the
program drops the last real reference while remaining in the RCU critical
section, refcount_inc_not_zero() returns NULL while the verifier treats the
result as non-NULL.
Only classify the argument as owning when it is backed by a verifier-tracked
reference. This retains the non-NULL return for pointers from bpf_obj_new(),
bpf_kptr_xchg(), or an earlier successful acquisition, while requiring a
NULL check for borrowed RCU kptrs.
[ kkd: Rewrote commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: add missing read barrier to rpc_status_get dumpit seqcount retry
The hand-rolled seqcount-like protocol in nfsd_nl_rpc_status_get_dumpit()
is missing a read memory barrier (smp_rmb) before its second counter
check. The standard kernel read_seqcount_retry() includes smp_rmb()
to ensure that all data reads complete before the counter is re-checked.
Without this barrier, on weakly-ordered architectures (ARM, POWER),
the CPU may reorder field reads past the second counter check, making
the retry logic ineffective: it could observe a consistent counter pair
while reading fields that have been concurrently modified by the writer.
Add smp_rmb() before the second counter check to order the field reads
ahead of it, matching the barrier semantics of the standard seqcount
read-side. The begin-side smp_load_acquire() already pairs with the
smp_store_release() in nfsd_dispatch(); with the smp_rmb() now ordering
the field reads, the retry check no longer needs acquire semantics and
reads the counter with a plain READ_ONCE(), as read_seqcount_retry()
does.
[ cel: Use READ_ONCE instead of smp_load_acquire() ] |
| ServiceNow has remediated an authorization bypass security issue that was identified in the ServiceNow AI Platform. This security issue, if exploited, could enable an authenticated user to access data within the ServiceNow AI Platform that the user otherwise would not be entitled to access, potentially enabling further unintended access.
ServiceNow deployed an update to hosted instances, and ServiceNow provided the update to our partners and self-hosted customers. We are not currently aware of malicious exploitation against ServiceNow instances. We recommend customers promptly apply appropriate updates or upgrade to a patched release if they have not already done so. |
| Incorrect access control in the BlogPage.get_entries() component of APSL puput v1.2.1 through v2.2.0 allows unauthenticated attackers to view restricted blog entries via the blog index, the tag, category, author and date archives, the sidebar widgets, or the RSS feed. |
