| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate fast symlink target during inode read
ocfs2_validate_inode_block() already rejects several inconsistent
self-contained dinodes before they are exposed to the rest of the
filesystem. Fast symlinks need the same treatment.
A zero-cluster symlink is treated as a fast symlink and later read through
page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses
strnlen() on the inline payload and then copies len + 1 bytes into the
folio. If a corrupt dinode stores an i_size that does not fit the inline
area or omits the terminating NUL at i_size, that copy reads past the end
of the inode block buffer.
Reject zero-cluster symlink dinodes whose i_size exceeds the inline
fast-symlink capacity or whose inline payload is not NUL-terminated
exactly at i_size when the inode block is validated. This keeps malformed
fast symlinks from reaching the read path.
Validation reproduced this kernel report:
KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0
RIP: 0033:0x7f5c6d859aa7
Read of size 3905
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xce/0x630 (?:?)
ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x19f/0x330 (?:?)
kasan_report+0xe0/0x110 (?:?)
kasan_check_range+0x105/0x1b0 (?:?)
__asan_memcpy+0x23/0x60 (?:?)
filemap_read_folio+0x27/0xe0 (?:?)
filemap_read_folio+0x35/0xe0 (?:?)
do_read_cache_folio+0x138/0x230 (?:?)
__page_get_link+0x26/0x110 (?:?)
page_get_link+0x2e/0x70 (?:?)
vfs_readlink+0x15e/0x250 (?:?)
touch_atime+0x4d/0x370 (?:?)
do_readlinkat+0x186/0x200 (?:?)
do_user_addr_fault+0x65a/0x890 (?:?)
__x64_sys_readlink+0x46/0x60 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: add bounds check on firmware mac_id in link lookup
The mac_id field in RX descriptors is 8 bits wide (0-255), but
assoc_link_on_macid[] has only RTW89_MAX_MAC_ID_NUM (128) entries.
While the driver currently assigns mac_id values below 128, the
descriptor value comes from firmware and is not validated before use
as an array index. Add a defensive bounds check in
rtw89_assoc_link_rcu_dereference() to guard against out-of-range
firmware values. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs
Cancel (and flush) the I/O APIC's delayed EOI handling work during the
"pre VM destroy" phase, before vCPUs are destroyed, as processing the EOI
broadcast will inject another IRQ if the line is asserted, i.e. will try
to deliver an IRQ to the target vCPU(s). Canceling the work after vCPUs
are destroyed leads to UAF if the delayed work is processed after vCPUs are
destroyed.
BUG: KASAN: slab-use-after-free in __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
Read of size 8 at addr ffff8880499abea0 by task kworker/1:2/1218
CPU: 1 UID: 0 PID: 1218 Comm: kworker/1:2 Not tainted 7.1.0-rc7 #5 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events kvm_ioapic_eoi_inject_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378
print_report+0x139/0x4ad mm/kasan/report.c:482
kasan_report+0xe4/0x1d0 mm/kasan/report.c:595
__kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
__kvm_irq_delivery_to_apic+0xd8/0xbf0 arch/x86/kvm/lapic.c:1345
kvm_irq_delivery_to_apic arch/x86/kvm/lapic.h:129
ioapic_service+0x308/0x590 arch/x86/kvm/ioapic.c:492
kvm_ioapic_eoi_inject_work+0x13c/0x190 arch/x86/kvm/ioapic.c:532
process_one_work+0xa59/0x19a0 kernel/workqueue.c:3314
process_scheduled_works kernel/workqueue.c:3397
worker_thread+0x5eb/0xe50 kernel/workqueue.c:3478
kthread+0x370/0x450 kernel/kthread.c:436
ret_from_fork+0x72b/0xd30 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Note, the VM is unreachable once kvm_destroy_vm() starts, and scheduling
new work via kvm_ioapic_send_eoi() can only be done via KVM_RUN, i.e.
requires a live vCPU.
Alternatively, KVM could simply destroy the I/O APIC during the "pre" phase
of VM destruction, but that gets more than a bit sketchy as KVM expects the
I/O APIC to exist if ioapic_in_kernel() is true, and nested virtualization
in particular has a bad habit of touching VM-scope state during vCPU
destruction. E.g. attempting to free the PIC during the pre phase would
lead to a NULL pointer dereference in kvm_cpu_has_extint(), and it's not
hard to imagine the I/O APIC having a similar flaw. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero
hci_conn::iso_data is accessed and modified without lock or RCU.
This leads to a race
[Task hdev->workqueue] [Task 2]
iso_recv iso_conn_put(conn)
conn = LOAD hcon->iso_data iso_conn_free(conn)
iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL
kfree(conn)
kref_get_unless_zero(&conn->ref) /* UAF */
and also to races in iso_conn_add() vs. iso_conn_free().
Fix by adding spinlock hci_conn::proto_lock and using it to guard
hci_conn::iso_data. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix zeropoint update where i_size > remote_i_size
Fix the update of the zero point[*] by netfs_release_folio() when there is
uncommitted data in the pagecache beyond the folio being released but the
on-server EOF is in this folio (ie. i_size > remote_i_size). The update
needs to limit zero_point to remote_i_size, not i_size as i_size is a local
phenomenon reflecting updates made locally to the pagecache, not stuff
written to the server. remote_i_size tracks the server's i_size.
[*] The zero point is the file position from which we can assume that the
server will just return zeros, so we can avoid generating reads.
Note that netfs_invalidate_folio() probably doesn't need fixing as
zero_point should be updated by setattr after truncation or fallocate.
Found with:
fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \
/xfstest.test/junk --replay-ops=junk.fsxops
using the following as junk.fsxops:
truncate 0x0 0x1bbae 0x82864
write 0x3ef2e 0xf9c8 0x1bbae
write 0x67e05 0xcb5a 0x4e8f6
mapread 0x57781 0x85b6 0x7495f
copy_range 0x5d3d 0x10329 0x54fac 0x7495f
write 0x64710 0x1c2b 0x7495f
mapread 0x64000 0x1000 0x7495f
on cifs with the default cache option.
It shows read-gaps on folio 0x64 failing with a short read (ie. it hits
EOF) if the FMODE_READ check is commented out in netfs_perform_write():
if (//(file->f_mode & FMODE_READ) ||
netfs_is_cache_enabled(ctx)) {
and no fscache. This was initially found with the generic/522 xfstest. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix potential for tearing in ->remote_i_size and ->zero_point
Fix potential tearing in using ->remote_i_size and ->zero_point by copying
i_size_read() and i_size_write() and using the same seqcount as for i_size.
We need to make sure that netfslib and the filesystems that use it always
hold i_lock whilst updating any of the sizes to prevent i_size_seqcount
from getting corrupted. |
| In the Linux kernel, the following vulnerability has been resolved:
handshake: Require admin permission for DONE command
ACCEPT and DONE are the two downcalls of the handshake genl
family, both intended for use by the trusted handshake agent
(tlshd). ACCEPT already requires GENL_ADMIN_PERM; DONE has
no privilege check at all.
The fd-lookup in handshake_nl_done_doit() only confirms that
some pending handshake request exists for the supplied sockfd;
it does not authenticate the sender. An unprivileged process
that guesses or observes a valid sockfd can therefore submit
a DONE with HANDSHAKE_A_DONE_STATUS == 0, leaving the kernel
consumer to proceed as if the handshake succeeded. A non-zero
status on a forged DONE tears down a legitimate in-flight
handshake before tlshd can report its real result. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: reject inverted service ranges from peer bindings
tipc_update_nametbl() inserts a binding advertised by a peer node using
the lower and upper service-range bounds taken directly from the wire,
without checking that lower <= upper. The local bind path validates the
ordering (tipc_uaddr_valid()), but the name-distribution path does not.
A binding with lower > upper is inserted at the far end of the
service-range rbtree (keyed on lower) where no lookup or withdrawal can
ever match it (service_range_foreach_match() requires sr->lower <= end).
The publication, its service_range node and the augmented rbtree entry
are then leaked for the lifetime of the namespace, and there is no
per-peer cap equivalent to TIPC_MAX_PUBL on locally created bindings.
Reject inverted ranges in the network path as well. A peer node can
otherwise leak unbounded binding-table memory by sending PUBLICATION
items with lower > upper. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: prevent snt_unacked underflow on CONN_ACK
tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count
from the unsigned 16-bit send counter snt_unacked without checking that it
does not exceed the number of messages actually outstanding:
tsk->snt_unacked -= msg_conn_ack(hdr);
msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK
message. If the ack count is larger than snt_unacked, the subtraction
wraps to a near-maximum value, leaving tsk_conn_cong() permanently true
and starving the connection of further transmits.
Validate the ACK count at the start of the CONN_ACK block and drop the
message if it acknowledges more messages than are outstanding. A peer (or,
for a local connection, the connected peer socket) can otherwise wedge a
TIPC connection's send side by sending an oversized connection ack. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: require net admin for TIPCv2 netlink mutators
TIPCv2 registers mutating generic-netlink operations without admin
permission flags. Generic netlink only checks CAP_NET_ADMIN when an
operation sets GENL_ADMIN_PERM or GENL_UNS_ADMIN_PERM, so a local
unprivileged process can currently change TIPC state through commands
such as TIPC_NL_NET_SET, TIPC_NL_KEY_SET, TIPC_NL_KEY_FLUSH, and
bearer enable/disable.
The legacy TIPC netlink API already checks netlink_net_capable(...,
CAP_NET_ADMIN) for administrative commands. Give the TIPCv2 mutators
the equivalent generic-netlink gate. Use GENL_UNS_ADMIN_PERM, which
maps to the same namespace-aware CAP_NET_ADMIN check that
netlink_net_capable() performs, so the behaviour matches the legacy
path and keeps working for CAP_NET_ADMIN holders in a non-initial user
namespace (containers).
A QEMU/KASAN repro run as uid/gid 65534 with zero effective
capabilities previously succeeded in changing the network id and node
identity, setting and flushing key material, and enabling/disabling a
UDP bearer. With this patch applied the same operations fail with
-EPERM. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: Don't dump dying fib_info in fib_leaf_notify().
syzbot reported use-after-free in nsim_fib4_prepare_event(). [0]
The problem is that the following functions call fib_info_hold() /
refcount_inc() while dumping fib_info under RCU, which is unsafe.
* mlxsw_sp_router_fib4_event()
* rocker_router_fib_event()
* nsim_fib4_prepare_event()
refcount_inc_not_zero() must be used, but it would be too late
there.
Let's guarantee the lifetime of fib_info in fib_leaf_notify().
Note that IPv6 does not need the corresponding change since
fib6_table_dump() holds fib6_table.tb6_lock.
[0]:
refcount_t: addition on 0; use-after-free.
WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25, CPU#0: kworker/u8:15/3420
Modules linked in:
CPU: 0 UID: 0 PID: 3420 Comm: kworker/u8:15 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
Workqueue: netns cleanup_net
RIP: 0010:refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25
Code: eb 66 85 db 74 3e 83 fb 01 75 4c e8 1b f1 22 fd 48 8d 3d 84 cb f1 0a 67 48 0f b9 3a eb 4a e8 08 f1 22 fd 48 8d 3d 81 cb f1 0a <67> 48 0f b9 3a eb 37 e8 f5 f0 22 fd 48 8d 3d 7e cb f1 0a 67 48 0f
RSP: 0018:ffffc9000f2c7270 EFLAGS: 00010293
RAX: ffffffff84a18858 RBX: 0000000000000002 RCX: ffff888032ff9ec0
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8f9353e0
RBP: 0000000000000000 R08: ffff888032ff9ec0 R09: 0000000000000005
R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880570cc000
R13: dffffc0000000000 R14: ffff88802b40563c R15: ffff8880570cc000
FS: 0000000000000000(0000) GS:ffff888126173000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb1f4d5d000 CR3: 000000006072a000 CR4: 00000000003526f0
Call Trace:
<TASK>
__refcount_add include/linux/refcount.h:-1 [inline]
__refcount_inc include/linux/refcount.h:366 [inline]
refcount_inc include/linux/refcount.h:383 [inline]
fib_info_hold include/net/ip_fib.h:629 [inline]
nsim_fib4_prepare_event drivers/net/netdevsim/fib.c:930 [inline]
nsim_fib_event_schedule_work drivers/net/netdevsim/fib.c:1000 [inline]
nsim_fib_event_nb+0x1055/0x1240 drivers/net/netdevsim/fib.c:1043
call_fib_notifier+0x45/0x80 net/core/fib_notifier.c:25
call_fib_entry_notifier net/ipv4/fib_trie.c:90 [inline]
fib_leaf_notify net/ipv4/fib_trie.c:2176 [inline]
fib_table_notify net/ipv4/fib_trie.c:2194 [inline]
fib_notify+0x36b/0x5e0 net/ipv4/fib_trie.c:2217
fib_net_dump net/core/fib_notifier.c:70 [inline]
register_fib_notifier+0x184/0x360 net/core/fib_notifier.c:108
nsim_fib_create+0x85d/0x9f0 drivers/net/netdevsim/fib.c:1596
nsim_dev_reload_create drivers/net/netdevsim/dev.c:1604 [inline]
nsim_dev_reload_up+0x374/0x7c0 drivers/net/netdevsim/dev.c:1058
devlink_reload+0x501/0x8d0 net/devlink/dev.c:475
devlink_pernet_pre_exit+0x1ff/0x420 net/devlink/core.c:558
ops_pre_exit_list net/core/net_namespace.c:161 [inline]
ops_undo_list+0x187/0x940 net/core/net_namespace.c:234
cleanup_net+0x56e/0x800 net/core/net_namespace.c:702
process_one_work kernel/workqueue.c:3314 [inline]
process_scheduled_works+0xb5d/0x1860 kernel/workqueue.c:3397
worker_thread+0xa53/0xfc0 kernel/workqueue.c:3478
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: tegra: tegra210_ahub: Validate written enum value
tegra_ahub_put_value_enum() reads e->values[item[0]] before
checking whether item[0] is within the enum item range. The existing
check therefore happens too late to prevent an out-of-range read of the
values array.
Move the check before the array access. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: aiu: Validate written enum values
The AIU HDMI and internal codec mux put callbacks use the written enum
value with snd_soc_enum_item_to_val() before checking whether the value is
valid for the enumeration.
Reject out-of-range values before converting the enum item, matching the
validation already done by the G12A HDMI and internal codec mux controls. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci: validate codec capability element length
Read Local Codec Capabilities returns a sequence of capability elements.
Each element starts with a one-byte length followed by that many payload
bytes.
hci_read_codec_capabilities() checks that the skb contains the length
byte, but then validates only caps->len against the remaining skb
length. A malformed controller response with one remaining byte and
caps->len set to one passes that check even though the element needs two
bytes. The parser then records a two-byte capability and copies one
byte beyond the advertised response payload into the codec list.
Validate the full element size, including the length byte, before adding
it to the accumulated capability length. This preserves all well-formed
capability elements and drops only truncated controller responses. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: hold vduse_lock across IDR lookup in open path
vduse_dev_open() looks up struct vduse_dev through the IDR and then
acquires dev->lock only after vduse_lock has been dropped.
This leaves a window where a concurrent VDUSE_DESTROY_DEV can remove the
same object from the IDR and free it before the open path locks the
device, leading to a use-after-free.
Close this race by keeping vduse_lock held until dev->lock has been
acquired in the open path, matching the lock ordering already used by
the destroy path. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: Avoid hashing uninitialized bytes in nlm4svc_lookup_file()
file_hash() digests the first LOCKD_FH_HASH_SIZE bytes of
nfs_fh.data when bucketing nlm_files[], independent of fh.size.
Commit 3de744ee4e45 ("lockd: Use xdrgen XDR functions for the
NLMv4 TEST procedure") set .pc_argzero to zero for the converted
procedures and moved file-handle population into
nlm4svc_lookup_file(), which copies only xdr_lock->fh.len bytes
into lock->fh.data.
When an NLMv4 client presents a file handle shorter than
LOCKD_FH_HASH_SIZE, bytes fh.len..31 retain whatever the argument
buffer held from an earlier request. The same wire handle then
hashes to different buckets across calls; nlm_lookup_file() misses
the existing nlm_file entry, and lock-state lookups fail.
Zero only the tail bytes that file_hash() would otherwise consume.
Handles of LOCKD_FH_HASH_SIZE or larger already populate every byte
that file_hash() reads. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix invalid pointer dereference in __btrfs_run_delayed_refs()
In the beginning of the loop, we try to obtain a locked delayed ref head,
if 'locked_ref' is currently NULL, by calling btrfs_select_ref_head(),
which can return an error pointer. If the error pointer is -EAGAIN we do
a continue and go back to the beginning of the loop, which will not try
again to call btrfs_select_ref_head() since 'locked_ref' is no longer
NULL but it's ERR_PTR(-EAGAIN), and then we do:
spin_lock(&locked_ref->lock);
against a ERR_PTR(-EAGAIN) value, generating an invalid pointer
dereference.
Fix this by ensuring that 'locked_ref' is set to NULL when
btrfs_select_ref_head() returns ERR_PTR(-EAGAIN) and incrementing 'count'
as well, to prevent infinite looping. We do this by doing a goto to the
bottom of the loop that already sets 'locked_ref' to NULL and does a
cond_resched(), with an increment to 'count' right before the goto.
These measures were in place before the refactoring in commit 0110a4c43451
("btrfs: refactor __btrfs_run_delayed_refs loop") but were unintentionally
lost afterwards. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix iommu_map_sgtable() return value check
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
pin_job() also was incorrectly assigning to 'int', which could cause
overflows into negative values.
Update pin_job() to correctly check for errors from iommu_map_sgtable. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix wrong pci_get_drvdata type in AER handlers
rtw89 stores an ieee80211_hw pointer via pci_set_drvdata() at probe
time, but io_error_detected() and io_resume() retrieve it as a
net_device pointer. This causes netif_device_detach/attach to
operate on an ieee80211_hw struct, reading and writing at wrong
offsets. The adjacent io_slot_reset() already does it correctly.
Use ieee80211_stop_queues/wake_queues instead, consistent with
every other queue stop/start path in the driver.
Tested on RTL8852CE by calling the handlers from a test module
before and after the fix. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix integer overflow in radeon_align_pitch()
radeon_align_pitch() has the same kind of overflow issue as the old
amdgpu helper: both the alignment round-up add and the final
'aligned * cpp' calculation can overflow signed int.
If that wraps, radeon_mode_dumb_create() can end up returning an
invalid pitch or creating a zero-sized dumb buffer.
Fix this by using check_add_overflow() for the alignment round-up and
check_mul_overflow() for the final pitch calculation, returning 0 on
overflow. Also reject zero pitch and size in
radeon_mode_dumb_create().
Found via AST-based call-graph analysis using sqry. |
