Search Results (22454 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-74300 1 Linux 1 Linux Kernel 2026-08-17 8.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci: validate codec capability element length Read Local Codec Capabilities returns a sequence of capability elements. Each element starts with a one-byte length followed by that many payload bytes. hci_read_codec_capabilities() checks that the skb contains the length byte, but then validates only caps->len against the remaining skb length. A malformed controller response with one remaining byte and caps->len set to one passes that check even though the element needs two bytes. The parser then records a two-byte capability and copies one byte beyond the advertised response payload into the codec list. Validate the full element size, including the length byte, before adding it to the accumulated capability length. This preserves all well-formed capability elements and drops only truncated controller responses.
CVE-2026-74313 1 Linux 1 Linux Kernel 2026-08-17 8.8 High
In the Linux kernel, the following vulnerability has been resolved: vduse: hold vduse_lock across IDR lookup in open path vduse_dev_open() looks up struct vduse_dev through the IDR and then acquires dev->lock only after vduse_lock has been dropped. This leaves a window where a concurrent VDUSE_DESTROY_DEV can remove the same object from the IDR and free it before the open path locks the device, leading to a use-after-free. Close this race by keeping vduse_lock held until dev->lock has been acquired in the open path, matching the lock ordering already used by the destroy path.
CVE-2026-74315 1 Linux 1 Linux Kernel 2026-08-17 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: lockd: Avoid hashing uninitialized bytes in nlm4svc_lookup_file() file_hash() digests the first LOCKD_FH_HASH_SIZE bytes of nfs_fh.data when bucketing nlm_files[], independent of fh.size. Commit 3de744ee4e45 ("lockd: Use xdrgen XDR functions for the NLMv4 TEST procedure") set .pc_argzero to zero for the converted procedures and moved file-handle population into nlm4svc_lookup_file(), which copies only xdr_lock->fh.len bytes into lock->fh.data. When an NLMv4 client presents a file handle shorter than LOCKD_FH_HASH_SIZE, bytes fh.len..31 retain whatever the argument buffer held from an earlier request. The same wire handle then hashes to different buckets across calls; nlm_lookup_file() misses the existing nlm_file entry, and lock-state lookups fail. Zero only the tail bytes that file_hash() would otherwise consume. Handles of LOCKD_FH_HASH_SIZE or larger already populate every byte that file_hash() reads.
CVE-2026-74321 1 Linux 1 Linux Kernel 2026-08-17 7.5 High
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid pointer dereference in __btrfs_run_delayed_refs() In the beginning of the loop, we try to obtain a locked delayed ref head, if 'locked_ref' is currently NULL, by calling btrfs_select_ref_head(), which can return an error pointer. If the error pointer is -EAGAIN we do a continue and go back to the beginning of the loop, which will not try again to call btrfs_select_ref_head() since 'locked_ref' is no longer NULL but it's ERR_PTR(-EAGAIN), and then we do: spin_lock(&locked_ref->lock); against a ERR_PTR(-EAGAIN) value, generating an invalid pointer dereference. Fix this by ensuring that 'locked_ref' is set to NULL when btrfs_select_ref_head() returns ERR_PTR(-EAGAIN) and incrementing 'count' as well, to prevent infinite looping. We do this by doing a goto to the bottom of the loop that already sets 'locked_ref' to NULL and does a cond_resched(), with an increment to 'count' right before the goto. These measures were in place before the refactoring in commit 0110a4c43451 ("btrfs: refactor __btrfs_run_delayed_refs loop") but were unintentionally lost afterwards.
CVE-2026-74413 1 Linux 1 Linux Kernel 2026-08-17 8.8 High
In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix wrong pci_get_drvdata type in AER handlers rtw89 stores an ieee80211_hw pointer via pci_set_drvdata() at probe time, but io_error_detected() and io_resume() retrieve it as a net_device pointer. This causes netif_device_detach/attach to operate on an ieee80211_hw struct, reading and writing at wrong offsets. The adjacent io_slot_reset() already does it correctly. Use ieee80211_stop_queues/wake_queues instead, consistent with every other queue stop/start path in the driver. Tested on RTL8852CE by calling the handlers from a test module before and after the fix.
CVE-2026-74417 1 Linux 1 Linux Kernel 2026-08-17 7.8 High
In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix integer overflow in radeon_align_pitch() radeon_align_pitch() has the same kind of overflow issue as the old amdgpu helper: both the alignment round-up add and the final 'aligned * cpp' calculation can overflow signed int. If that wraps, radeon_mode_dumb_create() can end up returning an invalid pitch or creating a zero-sized dumb buffer. Fix this by using check_add_overflow() for the alignment round-up and check_mul_overflow() for the final pitch calculation, returning 0 on overflow. Also reject zero pitch and size in radeon_mode_dumb_create(). Found via AST-based call-graph analysis using sqry.
CVE-2026-74521 1 Linux 1 Linux Kernel 2026-08-17 9.1 Critical
In the Linux kernel, the following vulnerability has been resolved: ksmbd: use memcmp() to compare ClientGUIDs ClientGUID is a fixed-size binary value and can contain embedded NUL bytes. strncmp() stops comparing at the first NUL byte, so different ClientGUID values can incorrectly be treated as equal. Use memcmp() in SMB3 multichannel session binding and FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE bytes.
CVE-2026-74545 1 Linux 1 Linux Kernel 2026-08-17 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: rtase: fix double free of multi-frag skb on DMA map failure In rtase_start_xmit(), when the head buffer DMA mapping fails after rtase_xmit_frags() has mapped all fragments, the error path clears the fragment descriptors with rtase_tx_clear_range(), which frees the skb through the last-frag slot and accounts tx_dropped. Control then falls through to the common error label, which frees the same skb a second time and counts it again. Return right after clearing the fragments when the skb owns frags; the no-frag case still drops through and frees the head skb once.
CVE-2026-74328 1 Linux 1 Linux Kernel 2026-08-17 8.8 High
In the Linux kernel, the following vulnerability has been resolved: iommufd: Destroy the pages content after detaching from dmabuf Sashiko points out this has gotten out of order, the mutex could still be in use through the dmabuf invalidation callbacks. Don't destroy any of the pages content until the dmabuf is fully detached.
CVE-2026-74347 1 Linux 1 Linux Kernel 2026-08-17 7.8 High
In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount Add a refcount for struct nf_ct_timeout which is used by ct extension to set the custom ct timeout policy, this tells us that the ct timeout is being used by a conntrack entry. When the last conntrack entry drops the refcount on the ct timeout, the ct timeout is released. Remove the refcount for control plane which controls if the ruleset refers to the timeout policy. After this update, it is possible to remove the ct timeout policy from nfnetlink_cttimeout immediately. This is for simplicity not to handle two refcounts on a single object. Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just hold a reference to the nf_ct_timeout object until packet is reinjected, since this is part of the ct extension, this will be released by the time the conntrack is freed. nf_ct_untimeout() is still called to clean up in a best effort basis: the ct timeout on existing entries gets removed when the ct timeout goes away, but as long as the iptables ruleset still refers to the ct timeout through a template, new conntracks may keep attaching it and extend its lifetime until the rule is removed. nf_ct_untimeout() is not called anymore from module removal path, this is unlikely to find timeouts give module refcount is bumped, and the new refcount already tracks the ct timeout policy use so it is released when unused.
CVE-2026-74354 1 Linux 1 Linux Kernel 2026-08-17 7.8 High
In the Linux kernel, the following vulnerability has been resolved: bpf: Take mmap_lock in zap_pages() zap_vma_range() requires the owning mm's mmap_lock to be held. Taking mmap_read_lock under arena->lock would AB-BA against arena_vm_close() and arena_map_mmap(), both of which run with mmap_write_lock held and then acquire arena->lock. Instead drop arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and re-resolve the vma via find_vma() since it may have been unmapped or replaced while waiting. Track processed vmls with a per-call generation in vml->zap_gen and serialize zap_pages() callers with a new arena->zap_mutex so concurrent callers on different uaddr ranges do not mark each other's vmls processed before the zap is done.
CVE-2026-74361 1 Linux 1 Linux Kernel 2026-08-17 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: nvme: fix FDP fdpcidx bounds check The fdpcidx bounds check sets n = NUMFDPC + 1 but used > instead of >=, incorrectly accepting fdp_idx when it equals n (i.e. NUMFDPC + 1).
CVE-2026-74377 1 Linux 1 Linux Kernel 2026-08-17 7.8 High
In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Copy WQE to local buffer in non-SRQ receive path For non-SRQ QPs, the responder reads WQE fields directly from the shared queue buffer mapped into userspace. This allows a malicious user to modify fields like num_sge or sge entries while the kernel is processing the WQE, leading to out-of-bounds reads in rxe_resp_check_length() and copy_data(). Introduce get_recv_wqe() that validates num_sge and copies the WQE to a kernel-local buffer before processing, matching the approach already used for SRQ WQEs in get_srq_wqe(). The srq_wqe buffer is reused since SRQ and non-SRQ paths are mutually exclusive per QP.
CVE-2026-74387 1 Linux 1 Linux Kernel 2026-08-17 7.8 High
In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: midi: Serialize output teardown with event_input event_process_midi() borrows msynth->output_rfile.output and then passes the substream to dump_midi() and snd_rawmidi_kernel_write() without synchronizing with the output open/close transition. midisynth_use() also publishes output_rfile before snd_rawmidi_output_params() has finished. The last midisynth_unuse() can therefore release the same rawmidi file and free substream->runtime before snd_rawmidi_kernel_write1() takes its runtime buffer reference. That leaves the event_input path using a stale substream or runtime and can end in a NULL-deref or use-after-free. Fix this with two pieces of synchronization. Keep a short IRQ-safe spinlock only for publishing or clearing output_rfile and for pairing the output snapshot with an snd_use_lock_t reference. Once event_process_midi() has taken that in-flight reference, it drops the spinlock before calling snd_seq_dump_var_event(), dump_midi(), or snd_rawmidi_kernel_write(). midisynth_unuse() now detaches the visible rawmidi file under the same spinlock, waits for the in-flight writers to drain, and only then drains and releases the saved file. midisynth_use() likewise opens into a local snd_rawmidi_file and publishes it only after snd_rawmidi_output_params() succeeds. The buggy scenario involves two paths, with each column showing the order within that path: event_input path: last unuse path: 1. event_process_midi() snapshots 1. midisynth_unuse() starts output_rfile.output. tearing down output_rfile. 2. dump_midi() reaches 2. snd_rawmidi_kernel_release() snd_rawmidi_kernel_write() closes the output file. before runtime is pinned. 3. close_substream() frees 3. The callback keeps using substream->runtime. the borrowed substream. Validation reproduced this kernel report: KASAN null-ptr-deref in snd_rawmidi_kernel_write1+0x56/0x360 RIP: 0033:0x7fde7dd0837f RIP: 0010:snd_rawmidi_kernel_write1+0x56/0x360
CVE-2026-74435 1 Linux 1 Linux Kernel 2026-08-17 7.5 High
In the Linux kernel, the following vulnerability has been resolved: rxrpc: rxrpc_verify_data ensure rx_dec_buffer alloc rxrpc_recvmsg_data() calls rxrpc_verify_data() whenever the rxrpc_call.rx_dec_buffer is unallocated and assumes that upon successful return that rx_dec_buffer must be allocated. However, rxrpc_verify_data() does not request an allocation if the rxrpc_skb_priv.len is zero. In addition, failure to allocate rx_dec_buffer will result in a call to skb_copy_bits() with a NULL destination which can trigger a NULL pointer dereference. To prevent these issues rxrpc_verify_data() is modified to always attempt to allocate the rxrpc_call.rx_dec_buffer if it is NULL. This issue was identified with assistance of a private sashiko instance.
CVE-2026-74530 1 Linux 1 Linux Kernel 2026-08-17 8.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to match the previous behavior.
CVE-2026-74531 1 Linux 1 Linux Kernel 2026-08-17 8.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: hold conn reference in abort_conn_sync() There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that.
CVE-2026-74538 1 Linux 1 Linux Kernel 2026-08-17 8.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: lock sk in iso_connect_ind Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the "ev3" part of iso_connect_ind. It may also be NULL if socket has transitioned away from the LISTEN/CONNECT states before locking. Fix by adding lock/release. Recheck hcon is valid after lock acquire where needed.
CVE-2026-74565 1 Linux 1 Linux Kernel 2026-08-17 7.8 High
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: make nft_object rhltable per table The nft_object rhltable is global, this allows for accessing objects that are being dismangled from lookup path by other existing netns. Given the nft_obj_destroy() releases the object inmediately, this might lead to use-after-free of these objects that are being released. Make the existing rhltable per table to address this issue to deal with with the nft_rcv_nl_event() path too. Update nft_obj_lookup() to take the table as non-const, otherwise, compiler complains when passing the objname_ht to rhltable_lookup().
CVE-2026-72485 1 Linux 1 Linux Kernel 2026-08-17 7.8 High
In the Linux kernel, the following vulnerability has been resolved: coresight: platform: defer connection counter increment until alloc succeeds coresight_add_out_conn() increments nr_outconns before calling devm_krealloc_array() and again before devm_kmalloc(). If either allocation fails, the counter is already bumped while the corresponding array entry is NULL or uninitialized garbage. coresight_add_in_conn() has the same problem with nr_inconns and devm_krealloc_array(). In both cases the probe returns -ENOMEM, which causes coresight_get_platform_data() to call coresight_release_platform_data() for cleanup. That function iterates up to nr_outconns (or nr_inconns) entries and dereferences each pointer unconditionally, hitting the NULL or garbage entry and panicking instead of failing gracefully. Fix by moving the counter increments to after all allocations succeed, so the struct is always consistent on any error path.