| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: Free arena sub-allocations on discover_arenas() error path
Memory allocated by btt_freelist_init(), btt_rtt_init(), and
btt_maplocks_init() is not freed on some discover_arenas() error
paths. This leaks memory when arena discovery fails.
Add the missing kfree() calls to release the allocations before
returning an error.
[ as: commit message and log edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: Plug nlm_file leak when nlm_do_fopen() fails
A client can repeatedly drive nlm_do_fopen() failures by presenting
file handles that the underlying export rejects. After kzalloc_obj()
succeeds in nlm_lookup_file(), the freshly allocated nlm_file is not
yet inserted into nlm_files[]. The nlm_do_fopen() failure path jumps
to out_unlock, which releases nlm_file_mutex and returns without
freeing the allocation, so each failure leaks one nlm_file.
Route the failure through out_free so kfree() runs before the
function returns. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom: Fix leak when custom dump_segments addition fails
Free allocated minidump_region 'name' in qcom_add_minidump_segments()
when failing before adding the region to 'dump_segments'. Otherwise,
the 'name' is not tracked and is never freed by qcom_minidump_cleanup().
Return error when adding to 'dump_segments' fails. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: cpcap-battery: Fix missing nvmem_device_put() causing reference leak
In cpcap_battery_detect_battery_type(), the reference to an nvmem
device obtained via nvmem_device_find() is not released with
nvmem_device_put() on the success or read-failure paths, causing a
permanent reference leak. The driver’s retry logic on subsequent
battery property reads can compound this leak, preventing the nvmem
device from ever being freed.
Found by code review. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix hole runlist memory leak in insert range error path
ntfs_non_resident_attr_insert_range() allocates hole_rl before mapping the
whole runlist. If ntfs_attr_map_whole_runlist() fails, the error path drops
ni->runlist.lock and returns without freeing hole_rl. This leaks memory
of sizeof(*hole_rl) * 2 bytes.
Fix this memory leak by freeing hole_rl before returning from
that error path, matching the later error paths in the same function. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: cacheinfo: Fix node reference leak in populate_cache_leaves
Currently, the while loop drops the reference to prev in each iteration.
If the loop terminates early due to a break, the final of_node_put(np)
correctly drops the reference to the current node.
However, if the loop terminates naturally because np == NULL, calling
of_node_put(np) is a no-op. This leaves the last valid node stored in
prev without its reference dropped, resulting in a node reference leak.
Fix this by changing the final `of_node_put(np)` to `of_node_put(prev)`. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: always put unsuccessfully committed target pids
damon_commit_target() puts and gets the destination and the source target
pids. It puts the destination target pid because it will be overwritten
by the source target pid. It gets the source pid because the caller is
supposed to eventually put the pids. In more detail, the caller will call
damon_destroy_ctx() after damon_commit_ctx() to destroy the entire source
context. And in this case, [f]vaddr operation set's cleanup_target()
callback will put the pids.
The commit operation is made at the context level. The operation can fail
in multiple places including in the middle and after the targets commit
operations. For any such failures, immediately the error is returned to
the damon_commit_ctx() caller. If some or all of the source target pids
were committed to the destination during the unsuccessful context commit
attempt, those pids should be put twice.
The source context will do the put operations using the above explained
routine. However, let's suppose the destination context was not
originally using [f]vaddr operation set and the commit failed before the
ops of the source context is committed. The destination does not have the
cleanup_target() ops callback, so it cannot put the pids via the
damon_destroy_ctx().
As a result, the pids are leaked. The issue in the real world would be
not very common. The commit feature is for changing parameters of running
DAMON context while inheriting internal status like the monitoring
results. The monitoring results of a physical address range ain't have
things that are beneficial to be inherited to a virtual address ranges
monitoring. So the problem-causing DAMON control would be not very common
in the real world. That said, it is a supported feature. And
damon_commit_target() failure due to memory allocation is relatively
realistic [1] if there are a huge number of target regions.
Fix by putting the pids in the commit operation in case of the failures.
The issue was discovered [2] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/crossbar: Use correct index in crossbar_domain_free()
crossbar_domain_free() resets the domain data and then uses the nulled
out irq_data->hwirq member as index to reset the irq_map[] entry and to
write the relevant crossbar register with a safe entry. That means it
never frees the correct index and keeps the crossbar register connection
to the source interrupt active.
If it would not reset the domain data, then this would be even worse as
irq_data->hwirq holds the source interrupt number, but both the map and
register index need the corresponding GIC SPI number and not the source
interrupt number. This might even result in an out of bounds access as
the source interrupt number can be higher than the maximal index space.
Fix this by using the GIC SPI index from the parent domain's irq_data. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/intel/tpmi: use cleanup helpers in mem_write()
In mem_write(), the temporary array returned by
parse_int_array_user() must be released on all exit paths.
Convert the array variable to use cleanup.h scope-based
cleanup so it is freed automatically on return.
This also moves the array declaration next to
parse_int_array_user() as required by cleanup.h usage
guidelines. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (atomic)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic
(polling) path rejects it as -EPROTO. Worse, it returns without a
NACK+STOP: the next receive cycle has already started, so the target
keeps holding SDA and the bus stays stuck until a power cycle for
this i2c controller.
Reading I2DR to obtain the count likewise arms the next byte on the
count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly
and left the bus held.
Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so
the existing last-byte handling emits STOP; the dummy byte is discarded.
A count of 0 is a valid empty block read; a count above
I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus
has been released.
The interrupt-driven path has the same flaw from a later commit and is
fixed separately, as it carries a different Fixes: tag and stable range. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: efct: Fix I/O leak on unsupported additional CDB
efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an
unsolicited FCP command. If the command has an unsupported additional
CDB, the function returns -EIO before handing the IO to the SCSI layer.
Free the allocated IO before returning from this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure
imsic_early_acpi_init() allocates a firmware node before setting up the
IMSIC state. If imsic_setup_state() fails, the function returns without
freeing the allocated fwnode.
Free the fwnode and clear the global pointer on this error path, matching
the cleanup already done when imsic_early_probe() fails.
[ tglx: Use a common cleanup path instead of copying code around ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: drop in-flight Tx SKBs on close
The MACB driver has since forever leaked the outgoing SKBs that
have not yet been marked as completed. They live in queue->tx_skb
which gets freed without remorse nor checking.
macb_free_consistent() gets called in a few codepaths, but only close will
trigger the added expressions. In macb_open() and macb_alloc_consistent()
failure cases, queues' tx_skb just got allocated and are empty. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: free mlx5_st_idx_data on final dealloc
Workloads that repeatedly allocate and release mkeys carrying TPH
steering-tag hints (e.g. churning RDMA MRs) leak one
struct mlx5_st_idx_data per cycle; kmemleak flags it as unreferenced
and the kmalloc slab grows over time.
When the last reference to an ST table entry is dropped,
mlx5_st_dealloc_index() removed the entry from idx_xa but the backing
mlx5_st_idx_data allocation was never freed.
Free idx_data after the xa_erase() so the lifetime of the bookkeeping
struct matches the lifetime of the ST entry it tracks. |
| In the Linux kernel, the following vulnerability has been resolved:
reset: sunxi: fix memory region leak on ioremap failure
In sunxi_reset_init(), when ioremap() fails, the memory region obtained
via request_mem_region() is not released, leading to a resource leak.
Add an err_mem_region label to properly release the memory region before
freeing the data structure. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: virt-concat: free duplicate generated name
Every MTD registration runs mtd_virt_concat_create_join(). Once a
virtual concat has already been registered, the function builds the same
name again and takes the equal-name branch. That branch skips to the
next item without freeing the newly allocated string.
Free the temporary name before continuing. |
| A malicious SSH peer could send unsolicited global request responses to fill an internal buffer, blocking the connection's read loop. The blocked goroutine could not be released by calling Close(), resulting in a resource leak per connection. Unsolicited global responses are now discarded. |
| In the Linux kernel, the following vulnerability has been resolved:
media: pwc: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
pwc's start_streaming() had two early returns that hit this trap:
-ENODEV when the USB device was already disconnected, and -ERESTARTSYS
when mutex_lock_interruptible() was interrupted by a signal. Call the
existing pwc_cleanup_queued_bufs() helper with VB2_BUF_STATE_QUEUED
before returning (matching the state already used by the
pwc_isoc_init() error path in the same function).
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: close UDP tunnel sockets during netns teardown
proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when
net.sctp.udp_port is set, and stops/restarts them when the sysctl value
changes. The netns exit path does not stop these sockets, so a namespace
can be torn down while its SCTP UDP tunnel sockets are still installed.
Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering
the per-net sysctl table. This prevents new sysctl writes from racing in
while the sockets are being released, and closes the sockets before the
control socket is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: sca3000: Fix a resource leak in sca3000_probe()
spi->irq from request_threaded_irq() not released when
iio_device_register() fails. Add an return value check and jump to a
common error handler when iio_device_register() fails. |
