| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in postgres-exporter. Due to the blank import of `net/http/pprof`, debug endpoints are exposed on the unauthenticated metrics listener. A remote attacker within the cluster network can access these endpoints. This allows for information disclosure, potentially revealing process arguments, full goroutine stacks, and sensitive data like database connection strings or passwords from heap dumps. Additionally, repeated CPU profiling through these endpoints can lead to a denial of service. |
| LiquidJS is a Shopify / GitHub Pages compatible template engine in pure JavaScript. Prior to 10.27.2, enabling ownPropertyOnly does not consistently restrict inherited array indices because negative indexing, .first, .last, the first filter, the last filter, join, reverse, slice, compact, and for-loop iteration can read prototype-provided elements outside readJSProperty(). An attacker who can influence prototype state or inherited array-index data and cause templates to render affected operations can disclose values that ownPropertyOnly is expected to hide. Direct positive indexing and ordinary object prototype reads are blocked, but the alternate array paths remain affected. This issue is fixed in 10.27.2. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix potential UAF after asynchronous card release
Usually a sound driver releases the resources assigned to the card via
snd_card_free(), and it synchronizes with the whole release procedure.
However, when the card is released asynchronously via
snd_card_free_when_closed() like USB-audio driver, the situation is
slightly different; although the snd_card_disconnect() call at the
disconnection guarantees that any newer accesses will be gated, the
in-flight tasks might be still accessing to the underlying card->dev
device even after the disconnection, which would cause a
use-after-free in the end, as reported by fuzzers.
For addressing the bug above, this patch takes the refcount of
card->dev at initialization of the card object, and releases at its
destructor. This assures the availability of the card->dev in its
whole lifecycle. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: abort transaction on failure to update inode for hole punching and reflinking
If we fail to update the inode we error out without aborting the
transaction, which can result in a persistent inconsistency if after
the failure the transaction is committed, as we have dropped file
extent items from a range and either punched a hole or insert a new file
extent item for that range (for reflinks).
So add the missing transaction abort. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kprobes: Fix crash when probing CS CALL instructions
When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.
The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:
<__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>: mov %r14,%rdi
<__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>: mov %eax,%r12d
<__hrtimer_run_queues+266>: xchg %ax,%ax
<__hrtimer_run_queues+268>: mov %r13,%rdi
Which triggers this crash:
BUG: unable to handle page fault for address: 00000000000f41c9
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP NOPTI
CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
RIP: 0010:__hrtimer_run_queues+0x106/0x230
Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.
The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.
During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.
Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.
[ mingo: Refined the changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: remove WARN_ON_ONCE() from the dev_fill_forward_path() loop check
ipip_fill_forward_path() and ip6_tnl_fill_forward_path() look up the
route to the tunnel's remote endpoint and set ctx->dev to its device,
which is the tunnel itself when that route resolves back to the tunnel.
dev_fill_forward_path() then makes no progress and trips
WARN_ON_ONCE(last_dev == ctx->dev) as soon as a flowtable tries to
offload a flow through the tunnel. That routing loop is a configuration
any CAP_NET_ADMIN user can set up, and ip_tunnel_xmit() and
ip6_tnl_xmit() already treat it as a tx error, so remove the warning and
just fail the walk, as commit 008e7a7c293b ("net: remove WARN_ON_ONCE
when accessing forward path array") did for the path stack overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix TSO header length truncation
stmmac_tso_xmit() stores the protocol header length returned by
stmmac_tso_header_size() in a u8. stmmac_tso_valid_packet() admits
headers up to 1023 bytes, so a header longer than 255 bytes wraps modulo
256 (486 becomes 230, 256 becomes 0).
A TCP over IPv6 socket carrying a few hundred bytes of sticky
destination/hop-by-hop options makes skb_tcp_all_headers() exceed 255
while staying below the 1023-byte limit, so such an skb reaches
stmmac_tso_xmit().
Widen proto_hdr_len to unsigned int, which is sufficient since the value
is bounded by the hardware limit, and adjust the debug print specifier
accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtksdio, btmtkuart: validate WMT event length before struct access
btmtksdio.c and btmtkuart.c cast a received WMT event straight to
struct btmtk_hci_wmt_evt and read its op/flag fields without checking
the event is long enough to contain them, unlike btmtk.c. The
FUNC_CTRL case then further casts to struct btmtk_hci_wmt_evt_funcc
and reads its 2-byte status field, again without a length check.
Firmware that sends a short or malformed WMT event makes both drivers
read past the end of the received SKB.
Mirror btmtk.c: validate the base WMT header with skb_pull_data()
before touching any of its fields, and when a FUNC_CTRL event turns
out to be the short, header-only form (a plain enable/disable ack
with no status word), decode the result from the header's own flag
byte instead (0 = success, otherwise failure).
Verified setup on MT7920, MT7921, MT7922 and MT7925: no regression. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix parent socket leak in iso_conn_ready()
iso_get_sock() returns the parent socket with a reference held, which is
dropped by sock_put() once the child socket has been set up. The error
path taken when iso_sock_alloc() fails only calls release_sock() and
returns, leaking the reference and thus the parent socket itself.
Drop the reference on that path as well. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: Do not write to the serial port after it is closed
hci_uart_close() closes the serdev port if HCI_QUIRK_NON_PERSISTENT_SETUP
is set (for example, for the WCN399x family). A failed hci_dev_open_sync()
following a successful qca_setup() calls hdev->close() but not
hdev->shutdown(), so the port is closed while power->vregs_on is left true.
qca_serdev_remove() then passes its power->vregs_on test and calls
qca_power_off(), which writes to the closed port unconditionally.
Seen on a WCN3988 by unbinding the driver after a controller failure. The
trace below is from a 7.0.0 based kernel, where qca_power_off() was still
named qca_power_shutdown():
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000038
Call trace:
tty_set_termios+0x50/0x238 (P)
ttyport_set_baudrate+0x84/0xc0
serdev_device_set_baudrate+0x24/0x40
qca_power_shutdown+0x158/0x1fc [hci_uart]
qca_serdev_remove+0x54/0x68 [hci_uart]
serdev_drv_remove+0x1c/0x2c
device_remove+0x4c/0x80
device_release_driver_internal+0x1cc/0x224
device_driver_detach+0x18/0x24
unbind_store+0xb4/0xc0
Check HCI_UART_PROTO_READY, which hci_uart_close() clears in the same place
it closes the port, before writing to it. The regulator disable is left
unconditional so the controller is still powered down.
The dangling serport->tty that turns this into a use-after-free is
addressed in a separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: coredump: Quiesce dump work on unregister
hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers
queue dump_rx without holding an hdev reference. Unregister leaves both
works live, so disconnecting during an active dump lets them access hdev
after hci_release_dev() frees it.
Shut down coredump processing during unregister. Close the producer gate
under dump_q.lock before disabling both works, then free the active buffer
and queued packets under hci_dev_lock. Serializing the gate with enqueue
prevents controller-specific workers from adding packets after the final
purge. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate TX skb length in send_sync
btintel_pcie_prepare_tx() copies skb->len bytes into a fixed
BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy.
Oversized packets are currently rejected only in
btintel_pcie_send_frame(); any future caller of
btintel_pcie_send_sync() would silently overflow the DMA buffer.
Add the bounds check in btintel_pcie_send_sync() itself, right
before skb_push() and the DMA copy. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained
hci_send_acl(), hci_send_sco() and hci_send_iso() queue hdev->tx_work
unconditionally. They can run from the L2CAP/SCO/ISO socket send path
while hci_dev_close_sync() is draining hdev->workqueue (HCIDEVDOWN
racing with a socket write). Since that queue_work() is not chained
work from the tx_work worker itself, __queue_work() sees the queue
marked __WQ_DRAINING, warns "cannot queue %ps on wq %s", and drops
the work:
WARNING: CPU: 1 PID: 5985 at kernel/workqueue.c:2352 __queue_work
Call Trace:
queue_work_on
l2cap_chan_send
l2cap_sock_sendmsg
...
hci_dev_close_sync() already sets HCI_CMD_DRAIN_WORKQUEUE before
draining, but only hci_cmd_work() and handle_cmd_cnt_and_timer()
check it before queuing. Route the tx_work producers through the
same guard via a shared hci_sched_tx() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg()
In mmp_pdma_prep_slave_sg(), for_each_sg() iterates the scatterlist
putting each entry into 'sg', but the entry length is read from 'sgl'
(the list head) instead of 'sg' (the current entry):
for_each_sg(sgl, sg, sg_len, i) {
addr = sg_dma_address(sg);
avail = sg_dma_len(sgl); /* should be 'sg' */
Consequently 'avail' is always the length of the first entry. For
multi-sg lists this causes out-of-bounds reads when a later entry is
shorter than the first, and silent data loss when it is longer.
Single-sg or uniformly-sized lists happen to mask the issue. |
| In JetBrains TeamCity before 2026.1.3
2025.11.7 kotlin DSL sandbox escape leading to RCE on the server was possible |
| Mattermost versions 11.9.x <= 11.9.0, 11.8.x <= 11.8.4, 11.7.x <= 11.7.7, 10.11.x <= 10.11.22 fail to validate that a property field belongs to the specified run before updating its value which allows an authenticated user with run property-management access to crash the Playbooks plugin via a REST request referencing a property field that belongs to a different run. Mattermost Advisory ID: MMSA-2026-00684 |
| ImageSharp is a 2D graphics library. From 2.1.0 until 4.1.2, the TIFF CCITT Group 4 encoder allocates Width times rowsPerStrip bytes even though T6BitCompressor.CompressStrip can emit encoded row data and two 12-bit end-of-facsimile-block codes beyond that capacity. TiffCcittCompressor.WriteCode performs unchecked writes, and a decode-and-re-encode flow can inherit TiffCompression.CcittGroup4Fax and one-bit metadata from attacker-supplied input. The resulting out-of-bounds writes can corrupt memory and terminate the process. This issue is fixed in version 4.1.2. |
| ImageSharp is a 2D graphics library. From 2.0.0 until 4.1.2, decoding an attacker-supplied 32-bit floating-point TIFF as Image<HalfVector4> and applying HistogramEqualization can produce a non-finite or out-of-range luminance in ColorNumerics.GetBT709Luminance. GrayscaleLevelsRowOperation.Invoke uses the resulting value as an unchecked histogram offset, causing an unsafe out-of-range access and process termination. Adaptive Histogram Equalization and AutoLevel are not affected by this report. This issue is fixed in version 4.1.2. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: move switchdev call outside rcu
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferred callback will be late and will see the updated state. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fddi: skfp: fix NULL deref when setting the MAC address while down
skfp_ctl_set_mac_address() calls ResetAdapter() unconditionally, without
checking netif_running(). ResetAdapter() first calls card_stop(), which
sets smc->hw.hw_state to STOPPED, and then mac_drv_clear_tx_queue(),
which walks the two transmit queues:
for (i = QUEUE_S; i <= QUEUE_A0; i++) {
queue = smc->hw.fp.tx[i] ;
...
t = queue->tx_curr_get ;
smc->hw.fp.tx[] is only populated by init_tx(), which is reached from
skfp_open() through init_smt() -> init_fddi_driver() -> init_fplus() ->
init_mac() -> init_tx(). The private area is allocated and zeroed by
alloc_fddidev(), so on an interface that has never been brought up both
queue pointers are still NULL. The hw_state test at the top of
mac_drv_clear_tx_queue() does not catch this, because card_stop() has
just set STOPPED; the function proceeds into the loop and dereferences
NULL. ResetAdapter() does call init_smt() itself, but only after the
queues have been cleared.
Setting the MAC address on a down interface therefore oopses:
ip link set dev fddi0 address 02:00:00:00:00:01
BUG: KASAN: null-ptr-deref in mac_drv_clear_tx_queue+0x68/0x2c0 [skfp]
Read of size 8 at addr 0000000000000010 by task ip/302
Call Trace:
<TASK>
mac_drv_clear_tx_queue+0x68/0x2c0 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b]
ResetAdapter+0x29/0x100 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b]
skfp_ctl_set_mac_address+0x57/0x80 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b]
netif_set_mac_address+0x1e4/0x2c0
do_setlink+0x684/0x2680
</TASK>
Address 0x10 is the offset of tx_curr_get, the third pointer in
struct s_smt_tx_queue, on 64-bit. mac_drv_clear_rx_queue(), which
ResetAdapter() calls immediately afterwards, dereferences
smc->hw.fp.rx[QUEUE_R1] in the same way behind the same ineffective
hw_state test; the transmit queue merely crashes first. Both are
covered by the guard below.
Skip the adapter reset when the interface is down. dev_addr_set() is
left unconditional, so the new address is still recorded in
dev->dev_addr. Nothing is lost by not resetting the adapter here:
skfp_open() deliberately re-reads the factory address on every open,
read_address(smc, NULL);
eth_hw_addr_set(dev, smc->hw.fddi_canon_addr.a);
and the comment above it states this is done to discard exactly such an
address override across a close/open cycle. An address set while the
interface is down could not have survived the following open even
before this change, so the guard removes no working behaviour. Guarding
the hardware side of ndo_set_mac_address() with netif_running() is
established practice; skge_set_mac_address() has done so since commit
2eb3e621c4e0 ("skge: set mac address bonding fix").
Guarding the reset as a whole, rather than NULL-checking the queues, is
also what the rest of the driver expects. After a previous open/close
the queue pointers are stale but non-NULL, so there is no crash, yet
ResetAdapter() goes on to call smt_online() and STI_FBI() ("Enable
Board Interrupts") while skfp_close() has already called free_irq() -
the adapter would be brought back online with no handler installed. The
only other ResetAdapter() caller is skfp_interrupt(), which by
construction runs only while the device is open.
Found by automated driver testing against an emulated SysKonnect FDDI
adapter under a KASAN-enabled 7.0.0 kernel. Triggering it requires
CAP_NET_ADMIN. |
