| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| stoatchat before 0.15.0 fails to validate SVG viewBox dimensions in the proxy endpoint, allowing attackers to cause denial of service by memory exhaustion. Attackers can host malicious SVGs with extremely large width and height values and trigger concurrent requests to exhaust available memory across proxy replicas. |
| A security vulnerability has been detected in TOTOLINK EX1200L 9.3.5u.6146_B20201023. Affected by this issue is the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component Password Configuration Handler. The manipulation leads to null pointer dereference. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. |
| Uncontrolled resource consumption vulnerability in the JSON plugin of Apache Struts. When an application is configured to populate actions from a JSON request body, the plugin reads that body into memory without bounding how much it will accept, so a single request can exhaust the heap and deny service to other users. The plugin's configurable JSON input length limit does not bound this read. The JSON plugin is an optional component; applications that do not use it, or use it without enabling JSON request-body handling, are not affected.
This issue affects Apache Struts: from 2.1.8 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1.
Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid heap allocation for free-cluster readahead state
get_nr_free_clusters() allocates a temporary file_ra_state before it
publishes the precomputed free cluster count, sets NVolFreeClusterKnown(),
and wakes vol->free_waitq. If that allocation fails, the worker returns
without setting the flag or waking waiters, so callers waiting for the free
count can block indefinitely.
The readahead state is only used synchronously while scanning the bitmap.
Keep it on the stack and pass it by address to the readahead helper. This
eliminates the early allocation failure path instead of adding a special
case that publishes a conservative count and wakes the waitqueue.
Zero-initialize the on-stack state because file_ra_state_init() only sets
ra_pages and prev_pos.
Apply the same treatment to __get_nr_free_mft_records(), which scans the
MFT bitmap with the same short-lived readahead state. |
| An issue in ACME mini_httpd 1.30 and prior allows a remote attacker to cause a denial of service via the HTTP request header parser in the handle_request() function |
| node-tar is a tar archive manipulation library for Node.js. Prior to 7.5.21, node-tar's filesFilter in src/list.ts uses the recursive mapHas helper to walk an archive entry path upward with path.dirname() and no segment cap when tar.t(...) or tar.x(...) receives a non-empty member-selection list. A crafted GNU L or PAX x long-path header with thousands of slash-separated segments reaches this.filter(entry.path, entry) in Parser[CONSUMEHEADER] in src/parse.ts before Unpack[CHECKPATH] applies maxDepth, causing an uncatchable RangeError stack overflow that terminates asynchronous and streaming Node.js consumers. This issue is fixed in version 7.5.21. |
| Hub is a Node.js WebSocket server and client with added features. Prior to 0.2.16, every incoming unauthenticated WebSocket connection triggers loadDefaultConnectionEventListeners to call requestClientId, which calls rpc.send for the get-client-id action and pushes a request into RPC.requests. The RPC.waitForReply function starts a setInterval polling loop every 10 milliseconds that is cleared only after a matching reply; if the client remains silent and closes, the timer and pending request stay allocated because the socket close path does not cancel them. Repeated connections therefore cause unbounded timers and heap entries, exhausting CPU and memory and making the server unavailable. This issue is fixed in version 0.2.16. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An attacker on the local network may be able to cause a denial-of-service. |
| Zeroconf is a pure Python implementation of multicast DNS service discovery. Prior to 0.149.6, DNSIncoming._log_exception_debug and the four QuietLogger exception-dedup methods stored an unbounded _seen_logs dictionary keyed by attacker-influenced IncomingDecodeError messages, retaining sys.exc_info() tracebacks whose frame locals kept raw packet self.data buffers and allowing unauthenticated hosts on the local link over UDP/5353 (224.0.0.251 / ff02::fb) to drive memory growth until mDNS-dependent features degrade or the process is OOM-killed. This issue is fixed in version 0.149.6. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: fix urb->setup_packet leak in error paths
The setup_packet of control urb is not freed if usb_submit_urb fails or
the submitted urb is killed. Add free in these two paths. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix metabuf leak in inode xattr initialization
commit bb88e8da0025 ("erofs: use meta buffers for xattr operations")
converted xattr operations to use on-stack erofs_buf instances.
erofs_init_inode_xattrs() uses such a metabuf while reading the inline
xattr header and shared xattr id array.
Some error paths after erofs_read_metabuf() leave through out_unlock
without dropping the metabuf, so the folio reference can leak.
Consolidate the cleanup at out_unlock. erofs_put_metabuf() is a
no-op if no folio has been acquired, and this keeps all paths after
taking EROFS_I_BL_XATTR_BIT covered by a single cleanup site. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix debugfs_lookup dentry leak and error handling
debugfs_lookup() returns a dentry with an elevated reference count that
must be released with dput(). The current code discards the returned
dentry without calling dput(), causing a reference leak on every
firmware reset recovery.
Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup()
returns ERR_PTR(-ENODEV), not NULL. The current check passes for error
pointers and would call dput() on an invalid pointer, causing a crash. |
| OpenTofu versions before 1.11.4 contain a denial of service vulnerability in the tofu init command when processing maliciously-crafted .zip archives for provider or module packages. Attackers can cause excessive CPU usage by controlling .zip archive content served during dependency installation, degrading system performance and preventing timely completion of the init process. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs()
Resetting all VFs causes resource leak on VFs with FDIR filters
enabled as CTRL VSIs are only invalidated and not freed. Fix by using
ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which
aligns behavior with the ice_reset_vf() function.
Reproduction:
echo 1 > /sys/class/net/$pf/device/sriov_numvfs
ethtool -N $vf flow-type ether proto 0x9000 action 0
echo 1 > /sys/class/net/$pf/device/reset |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.11, POST /api/stripe/webhook, POST /api/creem/webhook, and POST /api/waffo/webhook read and log full request bodies before signature validation in router/api-router.go and the payment controllers, allowing an unauthenticated attacker to cause memory pressure, container restarts, or disk exhaustion without forging a successful payment. This issue is fixed in version 1.0.0-rc.11. |
| Scriban before 7.0.0 contains three distinct denial-of-service vulnerabilities in expression evaluation that bypass existing safety controls through unbounded string multiplication, uncontrolled BigInteger shift operations, and LoopLimit bypass via range enumeration in builtin functions. Attackers who can supply templates can cause out-of-memory exceptions or CPU exhaustion, typically terminating the entire host process. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mlx5: Fix transport-domain rollback and initialize lb mutex earlier
mlx5_ib_alloc_transport_domain() allocates a transport domain and then
may fail in mlx5_ib_enable_lb(). In that case, the allocated TD is leaked.
Fix this by deallocating the TD when mlx5_ib_enable_lb() returns an
error. Also return 0 explicitly in the no-loopback-capability success
branch, and move dev->lb.mutex initialization to mlx5_ib_stage_init_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix error path leaks in some WMI WOW calls
Fix two instances where we used to directly return the result of
ath11k_wmi_cmd_send(...). Because we did not check the return value, we
also did not free the skb in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible token leak in mt7996_tx_prepare_skb()
If link_conf or link_sta lookup fails in mt7996_tx_prepare_skb routine,
mt7996 driver leaks an already allocated tx token. Fix the issue
releasing the token in case of error. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check return value of nvmet_tcp_set_queue_sock
The return value of nvmet_tcp_set_queue_sock() is currently ignored in
nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket
not being in TCP_ESTABLISHED state), the socket callbacks will not be
properly set, leading to queue and socket leakage.
Fix this by capturing the return value and calling
nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup. |
