| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's PCF POST /npcf-policyauthorization/v1/app-sessions handler panics on a single authenticated request whose ascReqData.suppFeat == "1" (enabling traffic-routing feature negotiation) and whose medComponents entries supply an afAppId but NO AfRoutReq. The create path then calls provisioningOfTrafficRoutingInfo(smPolicy, appID, routeReq, ...) with routeReq == nil and dereferences routeReq.RouteToLocs (and other fields) without a nil check, causing runtime error: invalid memory address or nil pointer dereference. Gin recovery converts the panic into HTTP 500. This vulnerability is fixed in 4.2.2. |
| free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's NEF PATCH /3gpp-pfd-management/v1/{afId}/transactions/{transId}/applications/{appId} handler panics with a nil-pointer dereference when the upstream UDR call fails AND the consumer wrapper returns err != nil together with a nil *ProblemDetails. The handler's errPfdData != nil branch builds its own problemDetailsErr correctly, but immediately after it reads problemDetails.Cause (the OTHER value, which is nil in this branch) and panics. Gin recovery converts the panic into HTTP 500, so a single PATCH against this endpoint returns 500 instead of the intended controlled error response whenever UDR access is failing. This vulnerability is fixed in 4.2.2. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: fix role switching during resume
If the role change while we are suspended, the cdns3 driver switches to the
new mode during resume. However, switching to host mode in this context
causes a NULL pointer dereference.
The host role's start() operation registers a xhci-hcd device, but its
probe is deferred while we are in the resume path. The host role's resume()
operation assumes the xhci-hcd device is already probed, which is not the
case, leading to the dereference. Since the start() operation of the new
role is already called, the resume operation can be skipped.
So skip the resume operation for the new role if a role switch occurs
during resume. Once the resume sequence is complete, the xhci-hcd device
can be probed in case of host mode.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208
Mem abort info:
...
Data abort info:
...
[0000000000000208] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted
6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT
Hardware name: Texas Instruments J7200 EVM (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usb_hcd_is_primary_hcd+0x0/0x1c
lr : cdns_host_resume+0x24/0x5c
...
Call trace:
usb_hcd_is_primary_hcd+0x0/0x1c (P)
cdns_resume+0x6c/0xbc
cdns3_controller_resume.isra.0+0xe8/0x17c
cdns3_plat_resume+0x18/0x24
platform_pm_resume+0x2c/0x68
dpm_run_callback+0x90/0x248
device_resume+0x100/0x24c
dpm_resume+0x190/0x2ec
dpm_resume_end+0x18/0x34
suspend_devices_and_enter+0x2b0/0xa44
pm_suspend+0x16c/0x5fc
state_store+0x80/0xec
kobj_attr_store+0x18/0x2c
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x130/0x1dc
vfs_write+0x240/0x370
ksys_write+0x70/0x108
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0x108
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401)
---[ end trace 0000000000000000 ]--- |
| free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's SMF mounts the UPI management route group without inbound OAuth2 middleware. On top of that, the DELETE /upi/v1/upNodesLinks/{upNodeRef} handler unconditionally dereferences upNode.UPF after the type-guarded async release, even though AN-typed nodes are constructed without a UPF object. As a result, a single unauthenticated DELETE /upi/v1/upNodesLinks/gNB1 request crashes the handler with a nil-pointer panic AND mutates the in-memory user-plane topology before panicking (the UpNodeDelete(upNodeRef) line runs first). This is an unauthenticated, state-mutating panic-DoS sink that an off-path network attacker can trigger by name against any AN entry. This vulnerability is fixed in 4.2.2. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
alloc_gcs() returns an error-encoded pointer on failure, which comes
from do_mmap(), not NULL.
The current NULL check fails to detect errors, which could lead to using
an invalid GCS address.
Use IS_ERR_VALUE() to properly detect errors, consistent with the
check in gcs_alloc_thread_stack(). |
| In the Linux kernel, the following vulnerability has been resolved:
octeon_ep_vf: add NULL check for napi_build_skb()
napi_build_skb() can return NULL on allocation failure. In
__octep_vf_oq_process_rx(), the result is used directly without a NULL
check in both the single-buffer and multi-fragment paths, leading to a
NULL pointer dereference.
Add NULL checks after both napi_build_skb() calls, properly advancing
descriptors and consuming remaining fragments on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu()
l3mdev_master_dev_rcu() can return NULL when the slave device is being
un-slaved from a VRF. All other callers deal with this, but we lost
the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu()
with commit 4832c30d5458 ("net: ipv6: put host and anycast routes on
device with address").
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418)
Call Trace:
ip6_pol_route (net/ipv6/route.c:2318)
fib6_rule_lookup (net/ipv6/fib6_rules.c:115)
ip6_route_output_flags (net/ipv6/route.c:2607)
vrf_process_v6_outbound (drivers/net/vrf.c:437)
I was tempted to rework the un-slaving code to clear the flag first
and insert synchronize_rcu() before we remove the upper. But looks like
the explicit fallback to loopback_dev is an established pattern.
And I guess avoiding the synchronize_rcu() is nice, too. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Add NULL pointer check to trigger_data_free()
If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse()
jumps to the out_free error path. While kfree() safely handles a NULL
pointer, trigger_data_free() does not. This causes a NULL pointer
dereference in trigger_data_free() when evaluating
data->cmd_ops->set_filter.
Fix the problem by adding a NULL pointer check to trigger_data_free().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()
In `probe()`, `request_irq()` is called before allocating/registering a
`power_supply` handle. If an interrupt is fired between the call to
`request_irq()` and `power_supply_register()`, the `power_supply` handle
will be used uninitialized in `power_supply_changed()` in
`wm97xx_bat_update()` (triggered from the interrupt handler). This will
lead to a `NULL` pointer dereference since
Fix this racy `NULL` pointer dereference by making sure the IRQ is
requested _after_ the registration of the `power_supply` handle. Since
the IRQ is the last thing requests in the `probe()` now, remove the
error path for freeing it. Instead add one for unregistering the
`power_supply` handle when IRQ request fails. |
| In the Linux kernel, the following vulnerability has been resolved:
pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle()
commit 6d3789d347a7 ("papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()"),
changed the create handle to FD_PREPARE(), but it caused kernel
null-ptr-deref because after call to retain_and_null_ptr(src_info),
src_info is re-used for adding it to the global list.
Getting the following kernel panic in papr_hvpipe_dev_create_handle()
when trying to add src_info to the list.
Kernel attempted to write user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on write at 0x00000000
Faulting instruction address: 0xc0000000001b44a0
Oops: Kernel access of bad area, sig: 11 [#1]
...
Call Trace:
papr_hvpipe_dev_ioctl+0x1f4/0x48c (unreliable)
sys_ioctl+0x528/0x1064
system_call_exception+0x128/0x360
system_call_vectored_common+0x15c/0x2ec
Now, the error handling with FD_PREPARE's file cleanup and __free(kfree) auto
cleanup is getting too convoluted. This is mainly because we need to
ensure only 1 user get the srcID handle. To simplify this, we allocate
prepare the src_info in the beginning and add it to the global list
under a spinlock after checking that no duplicates exist.
This simplify the error handling where if the FD_ADD fails, we can
simply remove the src_info from the list and consume any pending msg in
hvpipe to be cleared, after src_info became visible in the global list. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
cros_typec_register_thunderbolt() missed initializing the `adata->lock`
mutex. This leads to a NULL dereference when the mutex is later
acquired (e.g. in cros_typec_altmode_work()).
Initialize the mutex in cros_typec_register_thunderbolt() to fix the
issue. |
| Function calls to WOSCommonUtil.dll!WOSSysInfoGetDeviceInterface() in various DLLs (i.e., WOSProfileMgrModule.dll, WOSWebDavModule.dll) can return a NULL pointer (i.e., when no user is logged into the Triofox Server Agent Management Console). The returned NULL pointer is not checked before being dereferenced. |
| When processing a request with a URL path starting with /status or /sysinfo, WOSHttpStatusModule.dll is to be loaded to handle such URL patterns. The WOSBin_LoadHttpModule function in the dll would be called to set up a "module" object for that module. However, WOSHttpStatusModule.dll is not present in the installation. As a result, a function pointer to WOSBin_LoadHttpModule (which would have been in the export table in WOSHttpStatusModule.dll) is set to NULL, resulting in calling a function at address 0. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
Cover a missed execution path with a new check. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients
During a warm reset flow, the cl->device pointer may be NULL if the
reset occurs while clients are still being enumerated. Accessing
cl->device->reference_count without a NULL check leads to a kernel panic.
This issue was identified during multi-unit warm reboot stress clycles.
Add a defensive NULL check for cl->device to ensure stability under
such intensive testing conditions.
KASAN: null-ptr-deref in range [0000000000000000-0000000000000007]
Workqueue: ish_fw_update_wq fw_reset_work_fn
Call Trace:
ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp]
ishtp_reset_handler+0x85/0x1a0 [intel_ishtp]
fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc] |
| Invalid pointer in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 150 and Thunderbird 150. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: csiostor: Fix dereference of null pointer rn
The error exit path when rn is NULL ends up deferencing the null pointer rn
via the use of the macro CSIO_INC_STATS. Fix this by adding a new error
return path label after the use of the macro to avoid the deference. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: freescale: imx8qm-hsio: fix NULL pointer dereference
During the probe the refclk_pad pointer is set to NULL if the
'fsl,refclk-pad-mode' property is not defined in the devicetree node. But
in imx_hsio_configure_clk_pad() this pointer is unconditionally used which
could result in a NULL pointer dereference. So check the pointer before to
use it. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix NULL sock in aa_sock_file_perm
Deal with the potential that sock and sock-sk can be NULL during
socket setup or teardown. This could lead to an oops. The fix for NULL
pointer dereference in __unix_needs_revalidation shows this is at
least possible for af_unix sockets. While the fix for af_unix sockets
applies for newer mediation this is still the fall back path for older
af_unix mediation and other sockets, so ensure it is covered. |
