| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/diag: Add missing array_index_nospec() call to memtop_get_page_count()
'level' is user space controlled and used to read from an array. Add the
missing array_index_nospec() call to prevent speculative execution. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: validate session type before performing operation
The sessions ioctls are not applicable to all session types. PRESERVE_FD
is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only
valid for incoming session. Calling a incoming ioctl on an outgoing
session is invalid and can cause file handlers to run into unexpected
errors.
For example, a user can create a (outgoing) session, preserve a memfd,
and then immediately do a retrieve without doing a kexec in between.
This would result in memfd's retrieve handler to run. The handlers
expects to be called from a post-kexec context, and will try to do a
kho_restore_vmalloc() or kho_restore_folio() to try and restore memory.
KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but
since this is considered an internal error and KHO throws out a bunch of
WARN()s.
Associate a type with each ioctl op and validate the type in
luo_session_ioctl() before dispatching the ioctl handler to make sure
the op is being called for the right session type. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: use parsed transport offset in SCTP state lookup
set_sctp_state() reads the SCTP chunk header again in order to drive the
IPVS SCTP state table. For IPv6 it computes the offset with
sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from
ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped
extension headers and found the real transport header.
This makes the state machine read from the wrong offset for IPv6 SCTP
packets that carry extension headers. For example, an INIT packet with an
8-byte destination options header can be scheduled correctly by
sctp_conn_schedule(), but set_sctp_state() reads the first byte of the
SCTP verification tag as a DATA chunk type. The connection then moves
from NONE to ESTABLISHED instead of INIT1, gets the longer established
timeout, and updates the active/inactive destination counters
incorrectly. This happens even though the SCTP handshake has not
completed.
Use the parsed transport offset passed down from ip_vs_set_state() for
the SCTP chunk-header lookup. For IPv4 and IPv6 packets without
extension headers this preserves the existing offset. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix header buffer corruption with header-split and HW-GRO
The DQO RX datapath programs a per-buffer-queue-descriptor
header_buf_addr at post time and reads the split header back at
completion time. Both the post and the read currently index the
header buffer by queue position rather than by the buffer's identity:
- post (gve_rx_post_buffers_dqo): header_buf_addr is computed from
bufq->tail
- read (gve_rx_dqo): the header is read from desc_idx (the completion
queue head index)
This relies on the buffer-queue index and the completion-queue index
being equal for the start of every packet, i.e. on the device consuming
posted buffers and returning completions in the exact same order. That
assumption does not hold once HW-GRO is enabled with multiple
flows: coalesced segments are accepted and completed in an order that
may differ from the order buffers were posted, and segments from
different flows may interleave.
That results in two problems:
1. Wrong header slot on read. Because the read offset is derived from
the completion index (desc_idx) while the device wrote the header to
the address programmed for the buffer's buf_id, the driver can copy
a header belonging to a different packet. This shows up as
throughput drop (about 30% drop and large numbers of TCP
retransmissions) with header-split and HW-GRO both enabled and many
streams.
2. Header buffer reused while still owned by the device. The driver
advances bufq->head by one per completion and re-posts buffers based
on that. Arrival of N RX completions only guarantees that at least N
RX buffer descriptors have been read by the device. It does not
guarantee that the device has relinquished the ownership of all the
buffers corresponding to those N descriptors. With out-of-order
completions (e.g. the completion for a packet copied into buffer N
arrives before the completion for a packet copied into buffer N-1),
the driver can re-post and overwrite a header buffer that the device
is still going to write into, corrupting the header of a packet
whose completion has not yet been processed.
Fix both issues by indexing the header buffer by buf_id on both the post
and read paths. Reading from buf_id's slot is therefore always correct
regardless of completion ordering (fixes problem 1).
Indexing by buf_id also ties each header slot to the lifetime of its
buffer state. A buffer state is only returned to the free/recycle lists
when its own completion (buf_id) is processed, so its header slot can
only be re-posted after the device is done with it. This makes header
slot reuse safe under out-of-order completions (fixes problem 2).
Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the
header buffers based on num_buf_states to match the buf_id indexing. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Validate the packet length reported by the NIC
Validate the packet length reported in the RX CQE before passing it
to skb processing. The CQE is supplied by the NIC device and should
not be blindly trusted. |
| In the Linux kernel, the following vulnerability has been resolved:
cpu: hotplug: Bound hotplug states sysfs output
states_show() adds CPU hotplug state names into a single sysfs buffer
using sprintf(). With enough registered states, this can write past the
end of the PAGE_SIZE buffer.
Use sysfs_emit_at() so output is bounded. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix out-of-bounds read in ims_pcu_irq() debug logging
The debug logging in ims_pcu_irq() unconditionally prints data from
pcu->urb_in_buf. However, if the interrupt fired for pcu->urb_ctrl, the
actual data resides in pcu->urb_ctrl_buf. If urb->actual_length for the
control URB exceeds pcu->max_in_size, this leads to an out-of-bounds
read.
Fix this by printing from the correct buffer associated with the URB. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - validate control endpoint type
The driver currently assumes that the first endpoint of the control
interface is an interrupt IN endpoint without verifying it. A malicious
device could provide a different endpoint type, which would then be
passed to usb_fill_int_urb(), potentially leading to kernel warnings
or undefined behavior.
Verify that the control endpoint is an interrupt IN endpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HIDP: reject frames without a transaction header
hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0]
before checking that the L2CAP SDU contains a transaction header. A
connected HIDP peer can send an empty basic-mode SDU and make both paths
use an uninitialized byte from skb tailroom.
KMSAN reports the use in hidp_session_run(), with the uninitialized value
originating in __alloc_skb() through vhci_write(). The control path
produces two reports and the interrupt path produces one.
The byte can also be controlled by a malformed lower-layer packet. If an
HCI ACL packet contains an L2CAP PDU with a declared zero-length payload
followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to
the declared PDU length before dispatch. The current HIDP path nevertheless
consumes the extra byte as HIDP_TRANS_HID_CONTROL |
HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this
change, the same packet is discarded and a subsequent feature report
request succeeds.
Pull the transaction header with skb_pull_data() and discard frames that
do not contain it. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Reject firmware log with size smaller than header
fw_log_from_bo() validates the tracing buffer header_size and that the
log fits within the BO, but never checks that log->size is at least
log->header_size. fw_log_print_buffer() then computes:
u32 data_size = log->size - log->header_size;
which underflows to a near-U32_MAX value when firmware reports a log whose
size is smaller than its header. That huge data_size defeats the
log_start/log_end bounds clamps added by commit dd1311bcf0e6 ("accel/ivpu:
Add bounds checks for firmware log indices"), so fw_log_print_lines() reads
far past the small real data region of the BO. A size of 0 also makes
fw_log_from_bo() advance the offset by 0, causing the callers to loop
forever on the same header.
Reject logs whose size is smaller than the header (which also rejects
size == 0). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_skcipher - force synchronous processing on trees without ctx->state
The AIO/async path in skcipher_recvmsg() passes the socket-wide ctx->iv
directly into the skcipher request. After io_submit() the socket lock is
dropped and the request is processed asynchronously, so a concurrent
sendmsg(ALG_SET_IV) can overwrite ctx->iv and make the in-flight request
run under an attacker-controlled IV. For CTR/stream modes this is
IV/keystream reuse and lets an unprivileged user recover the plaintext of
a concurrent operation.
Snapshotting ctx->iv into per-request storage for the async path is not
sufficient. For ciphers with statesize == 0 - which includes cbc and ctr -
the MSG_MORE inter-chunk IV chaining is carried solely by the in-place
req->iv writeback, which a snapshot redirects into per-request memory that
af_alg_free_resources() releases on completion, silently producing wrong
output. Writing the IV back from the completion callback instead is not
possible either: that would require lock_sock() there, but the callback can
run in softirq/atomic context, so it must not sleep.
Make the operation synchronous instead, which removes both the IV race and
any writeback race. This is equivalent to the upstream resolution, commit
fcc77d33a34c ("net: Remove support for AIO on sockets"), which removed the
AIO socket path across net/ entirely and so produces the same end state for
this file. This patch deviates from that commit deliberately: rather than
removing AIO socket support tree-wide, which would be far too invasive for
stable, it removes only the AIO branch in crypto/algif_skcipher.c.
io_submit() now completes synchronously; AF_ALG async is rarely used in
practice.
The -EIOCBQUEUED check in skcipher_recvmsg() is now dead but harmless,
and is left alone to keep the fix minimal.
Tested on 6.6.y: attacker IV injection dropped from 2296/200000 to 0/200000
after the change; MSG_MORE chunked CTR output bit-identical to single-shot. |
| Netatalk is a Free and Open Source file server suite for Unix-like operating systems. In versions 3.1.19 through 4.4.2, a stack-based buffer overflow exists in the copydir() function of Netatalk's afpd daemon due to an integer underflow in the calculation of the remaining buffer size used for path construction. copydir() is a utility function called when a file operation crosses a device boundary inside an AFP shared volume, which the standard library's renameat() cannot handle. The function attempts to track available buffer space using srem and drem for source and destination paths. Incorrect arithmetic causes both srem and drem to underflow to SIZE_MAX. Consequently, boundary checks against strlen(de->d_name) always pass, allowing strcpy() to append filenames into nearly full stack buffers. Version 4.4.3 patches the issue. As a workaround, configure each AFP shared volume to be structured as a single file system, in other words no subdirectory of a shared volume should be a mount point for a different file system. |
| A security flaw has been discovered in TOTOLINK A800R 4.1.2cu.5137_B20200730. Affected is the function setWiFiWpsConfig of the file /cgi-bin/cstecgi.cgi of the component wps.so. The manipulation of the argument pin results in stack-based buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. |
| A vulnerability was determined in Tenda AC12 15.03.06.23_multi_TD01. This vulnerability affects the function formSetRebootTimer of the file /goform/SetSysAutoRebbotCfg of the component httpd web management interface. This manipulation of the argument rebootTime causes buffer overflow. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. |
| A security flaw has been discovered in TOTOLINK A800R 4.1.2cu.5137_B20200730. The impacted element is the function setIpQosRules of the file /cgi-bin/cstecgi.cgi of the component firewall.so. The manipulation of the argument Comment results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate extension-frame layout before RX
Extension frames only have the extension header at the regular 802.11
header offset. The generic RX path can still reach helpers and interface
dispatch code that read regular header address fields before unsupported
extension subtypes are dropped.
mac80211 currently only handles S1G beacon extension frames. Drop other
extension subtypes before they can reach regular-header RX processing.
For S1G beacons, linearize the SKB with the management-frame path and
require the fixed S1G beacon header, including optional fixed fields
indicated by frame control, before generic RX dispatch.
Route S1G beacons through the station/default-link RX path without
regular-header station lookup. Avoid regular-header address reads in the
mac80211 RX paths that process S1G extension beacons, including
accept-frame, duplicate-detection, address-copy, and MLO
address-translation paths.
Also make ieee80211_get_bssid() length-safe before returning the S1G
source-address pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate EHT MLE before MLD ID read
cfg80211_gen_new_ie() copies ML probe response elements from
the parent frame when the parent EHT multi-link element has an
MLD ID matching the nontransmitted BSSID index.
The code only checked that the extension element had more than
one byte before calling ieee80211_mle_get_mld_id(). That helper
assumes a BASIC MLE with enough common info and documents that
callers must first use ieee80211_mle_type_ok().
Attack chain:
malicious AP sends a short EHT MLE in an MBSSID beacon.
cfg80211_inform_bss_frame_data() stores the copied IE buffer.
cfg80211_parse_mbssid_data() builds the nontransmitted BSS IE.
cfg80211_gen_new_ie() sees the EHT MLE in the parent frame.
ieee80211_mle_get_mld_id() then reads past the IE boundary.
Validate the MLE type and size before reading the MLD ID. This
matches the contract required by the MLE helper and rejects the
short element before any internal MLE fields are accessed. |
| A security vulnerability has been detected in sonos tract up to 0.23.4. This impacts the function Tensor::from_raw_dt_align of the file data/src/tensor.rs of the component ONNX Initializer Loader. Such manipulation leads to incorrect calculation of buffer size. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The name of the patch is 66b10bda8895f4bfaf8c205361f0125cdf51f99b. It is best practice to apply a patch to resolve this issue. |
| A vulnerability was detected in EricLBuehler Mistral.rs up to 0.8.22. Affected by this issue is the function convert_gguf_to_hf_tokenizer of the file mistralrs-core/src/gguf/gguf_tokenizer.rs of the component GGUF Tokenizer. The manipulation of the argument eos_token_id/bos_token_id/unknown_token_id results in out-of-bounds read. The attack can be executed remotely. The exploit is now public and may be used. Upgrading to version 0.8.23 can resolve this issue. The patch is identified as cd5297e2ea5cb27c790bdcf2f3c2f1064a81d55e. Upgrading the affected component is recommended. |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in Safari 26.5.2, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.5.2 and iPadOS 26.5.2, macOS Tahoe 26.5.2, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected process crash. |
