| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Inclusion of functionality from untrusted control sphere in .NET allows an unauthorized attacker to disclose information over a network. |
| Server-side request forgery (ssrf) in Microsoft PowerShell Core allows an unauthorized attacker to disclose information over a network. |
| openssl_encrypt versions before 1.4.6 contain a key derivation flaw in sequential XOR composition mode where the last stage cancels out during key generation. When configured with a single KDF and no prior hashing stage, attackers can bypass memory-hard key derivation and perform offline password cracking at SHA-256 speed instead of the configured KDF cost. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending leak on write request failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before dispatching write requests. Several failure
paths in raid10_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid10_write_request() return a status indicating whether the write
request was successfully queued. This allows raid10_make_request() to
release the writes_pending reference with md_write_end() when a write
request fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: igmp: Fix potential memory leaks in igmp_mod_timer() and igmp_stop_timer()
When a timer is deleted and not re-armed in igmp_mod_timer(), or stopped
in igmp_stop_timer(), the code currently decrements the reference counter
of the multicast list entry @im using refcount_dec(&im->refcnt).
However, both functions can be called from the RCU reader path:
- igmp_mod_timer() via igmp_heard_query() -> for_each_pmc_rcu()
- igmp_stop_timer() via igmp_rcv() -> igmp_heard_report()
If the group im was concurrently removed from the list by ip_mc_dec_group(),
its reference count might have already been decremented to 1.
In this case, timer_delete() succeeds, and refcount_dec() decrements
the refcount from 1 to 0. Since refcount_dec() does not free the object
when it hits 0 (unlike ip_ma_put()), the im structure is leaked.
Fix this by using ip_ma_put(im) instead of refcount_dec(&im->refcnt),
and deferring the put until after the spinlock is released. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/remotes: Fix leak in trace_remote_alloc_buffer() error path
If page allocation fails in trace_remote_alloc_buffer(), desc->nr_cpus
is not yet incremented for the current CPU. As a consequence, on error,
half-allocated rb_desc will not be freed in trace_remote_free_buffer().
Increment desc->nr_cpus as soon as the first allocation for the current
CPU has succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: fix refcount leak in mlxsw_sp_vrs_lpm_tree_replace()
When mlxsw_sp_vrs_lpm_tree_replace() fails after replacing some VRs,
the error rollback loop does not correctly revert the preceding
replacements. The loop decrements the index but fails to update the
vr pointer, which still points to the VR that caused the failure. As
a result, the condition and the rollback call always operate on the
same VR, potentially calling mlxsw_sp_vr_lpm_tree_replace() multiple
times on it while never rolling back the earlier VRs. Those VRs
continue to hold a reference to new_tree acquired via
mlxsw_sp_lpm_tree_hold(), leaking the reference count of new_tree.
Fix by reinitializing vr inside the error loop with the updated index:
vr = &mlxsw_sp->router->vrs[i];
so that the loop correctly iterates over all VRs that were actually
replaced. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8192: Check runtime resume during probe
The MT8192 AFE probe enables runtime PM temporarily while reinitializing
the regmap cache from hardware, but it uses pm_runtime_get_sync()
without checking the return value. If runtime resume fails, probe keeps
going without the device necessarily being accessible, and
pm_runtime_get_sync() may leave the PM usage count incremented.
The regmap_reinit_cache() failure path also returns before dropping the
temporary PM reference and before clearing pm_runtime_bypass_reg_ctl.
Use pm_runtime_resume_and_get() so resume failures do not leak a usage
count, and clear the temporary bypass flag after dropping the probe PM
reference on all regmap_reinit_cache() outcomes. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix device reference leak in host1x_device_parse_dt() error path
After device_initialize(), the embedded struct device in struct
host1x_device should be released through the device core with
put_device().
In host1x_device_add(), if host1x_device_parse_dt() fails, the current
error path frees the object directly with kfree(device). That bypasses
the normal device lifetime handling and leaks the reference held on the
embedded struct device.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fix this by using put_device() in the host1x_device_parse_dt() failure
path. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: frag: fix primary_if leak on failed linearization
If the skb has a frag_list, it must be linearized before it can be split
using skb_split(). But when this step failed, it must not only free the skb
but also take care of the reference to the already found primary_if. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: fix refcount leak in i_ipmi_request()
When a caller provides a `supplied_recv` message to i_ipmi_request(),
the function increments the user's `nr_msgs` reference count. If an
error occurs later, the out_err cleanup path only frees the recv_msg
if the function allocated it itself (i.e., !supplied_recv). In the
supplied_recv case the cleanup is skipped, leaving the reference count
elevated. The caller ipmi_request_supply_msgs() does not release the
supplied_recv on error, so the reference is permanently leaked.
Fix this by explicitly reverting the reference count operations when a
supplied recv_msg with a valid user pointer is present in the error
path: decrement nr_msgs and drop the user's kref. |
| A flaw has been found in jkawamoto mcp-florence2 up to 0.3.13. Affected by this issue is the function get_images of the file src/mcp_florence2/__init__.py. This manipulation of the argument src causes server-side request forgery. The attack may be initiated remotely. The exploit has been published and may be used. It is recommended to change the configuration settings. The vendor explains: "For deployments where SSRF protection is required, I recommend routing all HTTP(S) requests through an SSRF-safe proxy server. This approach mitigates the vulnerability without requiring changes to the mcp-florence2 source code." |
| Fulcio is a certificate authority for issuing code signing certificates for an OpenID Connect (OIDC) identity. Versions through 1.8.5 improperly follow cross-host redirects and attach Kubernetes ServiceAccount tokens during OIDC discovery, allowing a malicious or compromised issuer to perform blind SSRF, substitute and cache malicious JWKS keys, or disclose ServiceAccount tokens to external hosts. Version 1.8.6 blocks cross-host redirects, restricts token injection, and restricts local token loading. No known workarounds are available. |
| SSRF via Migration Asset Downloads Bypasses hostmatcher — Reads Internal Files and Cloud Metadata |
| Craft CMS versions from 4.0.0-RC1 before 4.18.2 and from 5.0.0-RC1 before 5.10.6 contain an authenticated remote code execution vulnerability in the control panel element-search condition handling. Craft cleanses the outer request-controlled condition array via Component::cleanseConfig(), but Conditions::createCondition() later decodes and merges the JSON string in condition.config without re-running cleanseConfig() on the decoded configuration. Because condition.config is a JSON string during the first cleanse, Yii special config keys such as 'as ...' and 'on ...' can be hidden inside it and, after JSON decoding, are interpreted by Yii as behavior/event configuration during FieldLayout object creation. An attacker with an authenticated control panel session (and a valid CSRF token) can exploit this to execute operating system commands as the PHP/web user. |
| Repository migration SSRF via multi-answer DNS allow-list bypass |
| SSRF in restore-repo via unsanitized pull_request.yml Head.CloneURL |
| Two SSRF findings in Gitea 1.26.2 |
| TypeORM is a TypeScript and JavaScript ORM for Node.js that supports PostgreSQL, MySQL, MariaDB, SQLite, SQL Server, Oracle, and other databases. Prior to versions 0.3.31 and 1.1.0, typeorm migration:generate embeds database schema metadata into JavaScript or TypeScript template literals in src/commands/MigrationGenerateCommand.ts, escaping backticks but not ${...} interpolation. An attacker with database schema write access can place a payload in column COMMENT or DEFAULT metadata, or another introspected schema string, and the JavaScript engine evaluates the payload when the generated migration is loaded through migration:run, import, or require. This issue is fixed in versions 0.3.31 and 1.1.0. |
| Serendipity before 2.6.0 contains a server-side request forgery vulnerability in the serendipity_url_allowed() filter that fails to block hex-encoded IPv4 addresses, IPv6 literals, and link-local ranges. Authenticated users with adminImagesAdd permission can bypass the filter using alternate address formats to request internal services and retrieve response bodies through the public uploads directory. |
