| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: complete object teardown when the destroy command fails
erdma_destroy_qp(), erdma_destroy_cq(), erdma_dereg_mr(), and
erdma_destroy_ah() returned early when erdma_post_cmd_wait() failed,
leaking the queue buffers, MTTs, doorbells and the STAG, QPN, CQN and AHN
identifiers. A command timeout clears ERDMA_CMDQ_STATE_OK_BIT and
permanently disables the command queue, so no retry can succeed; the RDMA
core keeps the object after a failed destructor and forced uverbs cleanup
then nulls the pointers, making the resources unreachable.
Warn on failure but release every software-owned resource and return
success, since during terminal destruction the hardware command result is
only diagnostic. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: Keep link pointers valid on realloc failure
meson_card_reallocate_links() grows the DAI link and private data
arrays with two consecutive krealloc() calls and updates the owner
pointers only after both calls have succeeded.
A successful krealloc() may move the data: it frees the old block and
returns a new one. When that happens for the link array and the second
krealloc() then fails, card->dai_link still points to the block that
krealloc() already freed, and the error path frees the new block too.
The probe error path then calls meson_card_clean_references(), which
dereferences card->dai_link and kfree()s it again, resulting in a
use-after-free and a double free.
Commit card->dai_link and card->num_links right after the first
krealloc() succeeds, so the pointer always refers to a valid allocation
that meson_card_clean_references() can walk and free. krealloc() with
__GFP_ZERO zero-initializes the added entries, so walking them on the
error path is safe. With both failure paths reduced to a plain return,
drop the goto labels and the error message. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Terminate all descriptors without callbacks
The DMA Engine client documentation says in the "Terminate APIs" section
of Documentation/driver-api/dmaengine/client.rst:
"No callback functions will be called for any incomplete transfers."
dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches
the interrupt handler. This schedules a callback for the active descriptor
and leaves other issued or submitted descriptors queued. A late callback
after dmaengine_terminate_sync() can dereference client state that has
already been freed, while leftover descriptors may later restart into
reused buffers or leak.
Move all issued and submitted descriptors to the terminated list whenever
termination completes. For a pending STOP, do this from both the DONE and
ABORT paths. Complete their cookies in order without scheduling callbacks.
A STOP can remain pending until the running transfer raises an
interrupt. Make device_synchronize() wait for such a pending STOP to
complete before releasing terminated descriptors. Reuse it from
free_chan_resources(), then release the remaining virt-dma resources.
Sleep instead of busy-polling while waiting, and warn if the existing
timeout expires. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ipu6: Do not free aux device pdata after init
ipu6_bus_initialize_device() stores the isys/psys pdata pointer in
struct ipu6_bus_device and initializes the auxiliary device. After that
point, error unwinding must drop the auxiliary device reference and let
ipu6_bus_release() free both the bus device and adev->pdata.
The isys and psys init paths already call put_device() when MMU
initialization fails, and ipu6_bus_add_device() calls
auxiliary_device_uninit() on auxiliary_device_add() failure. Both paths
therefore run the bus release callback. The extra kfree(pdata) in the
callers can release the same object a second time.
Remove the manual pdata frees after the auxiliary device has been
initialized.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate seg_id fields from persistent memory
cache_pos_decode(), cache_key_decode() and the last-kset branches of
cache_replay(), the writeback worker and the GC worker take a cache
segment id from the cache device metadata and index cache->segments[]
with it without checking it against cache->n_segs. That metadata is only
CRC-protected with a fixed public seed, so whoever supplies the cache
device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range
value forms a wild pcache_cache_segment pointer that is dereferenced and
written through -- an out-of-bounds read and write driven by on-disk data.
Add cache_seg_id_valid() and reject an out-of-range id at each decode
site, failing the operation with -EIO instead of indexing past the array.
Bound the id against the initialized-segment count (cache_info.n_segs)
rather than the physical device total. A forged cache_info.n_segs below
seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed
structs whose data pointer is NULL, so a forged id in that window would
still be dereferenced. A later patch guarantees cache_info.n_segs <=
seg_num, and a driver-created cache sets the two equal, so valid images
are unaffected. |
| WACRM is a self-hostable CRM template for WhatsApp. In version 0.7.0 and earlier, WACRM flow and automation write routes authenticate account viewers but do not enforce the agent role before using a service-role database client that bypasses row-level security. In src/app/api/flows/[id]/route.ts, src/app/api/flows/[id]/activate/route.ts, and src/app/api/flows/route.ts, a viewer can create, edit, activate, or delete flows because membership-only checks are followed by service-role writes. In src/app/api/automations/route.ts and src/app/api/automations/engine/route.ts, a viewer can create active automations and trigger outbound WhatsApp actions without the role required by the underlying write policies. This can permit unauthorized workflow changes, destructive flow deletion, and outbound actions from a role intended to be read-only. This vulnerability is fixed with commit 03e851bea56dcf6bb21ff1b80ba531372bf3269f. |
| The Gravity Forms plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 3.1.0.4 via the upload_file function. This is due to a mismatch between the field validation pipeline and the file persistence pipeline, where hidden file upload fields bypass extension validation and a rejected file's intact upload state is later passed to upload_file() without re-validation. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. Exploitation requires the targeted form to contain a File Upload field with its Visibility set to 'Hidden'; the vulnerability is reachable by unauthenticated attackers on any publicly accessible form meeting this condition. |
| The Better Messages – Chat Rooms, Group Chat, Private Messages & AI Chat Bots plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.15.33. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with custom-level access and above, to access the full message transcript, thread metadata, and user data of any chat-room thread without authentication. This is only exploitable when the chat room's only_joined_can_read setting retains its default value of '0'. |
| The WP Recipe Maker plugin for WordPress is vulnerable to Arbitrary Shortcode Execution in all versions up to, and including, 10.8.1. The vulnerability exists because `WPRM_Metadata::sanitize_metadata()` recursively calls `do_shortcode()` on every scalar field of the recipe's structured metadata array — including the `reviewBody` field, which is populated verbatim from the `comment_content` of approved `wprm-comment-rating` comments — without sanitizing or stripping shortcode tokens before execution; the subsequent `wp_strip_all_tags()` and `strip_shortcodes()` calls operate only on the output string after execution has already fully occurred, providing no protection against server-side shortcode invocation. This makes it possible for unauthenticated attackers to execute arbitrary registered WordPress shortcodes server-side on every recipe page render, causing shortcode output — such as attachment captions, private post fields, or other data exposed by installed shortcodes — to be embedded in the page's JSON-LD `reviewBody` metadata and disclosed to all visitors who load the recipe page. Successful exploitation requires the attacker's rated comment to pass the site's comment approval threshold, either via auto-approval or moderator action, before the injected shortcode begins executing on page loads. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: prevent out-of-bounds read in super root block parsing
super-root inode metadata size is trusted before nilfs_read_inode_common().
Reject super-root inode sizes whose computed on-disk footprint exceeds the
filesystem block size. This prevents malformed filesystem images from
making nilfs_read_inode_common() read past the end of the super-root block.
[ryusuke: clarify the commit title] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix UAF in ODP init error-handling path
rxe_odp_mr_init_user() stores &umem_odp->umem in mr->umem before
calling rxe_odp_init_pages(). If rxe_odp_init_pages() fails,
rxe_odp_mr_init_user() releases umem_odp and returns an error.
rxe_reg_user_mr() then unwinds the error through rxe_cleanup(),
rxe_mr_cleanup(), ib_umem_release(mr->umem). There is an
IS_ERR_OR_NULL(umem) check at the start of ib_umem_release().
But since mr->umem is NOT reset to NULL in the error handling
path of rxe_odp_mr_init_user(), the check passes and it reads
already-freed fields like umem->is_dmabuf, causing UAF.
Fix the UAF by clearing mr->umem after releasing the failed
ODP umem so the MR cleanup path does not release it again. |
| The Master Blocks WordPress plugin before 1.5.0 does not have authorisation on one of its REST routes, allowing unauthenticated users to update its settings, including a value that is output unescaped in the admin area, leading to Stored XSS that executes in the session of any administrator visiting a wp-admin page. |
| The Hydra Booking — Appointment Scheduling & Booking Calendar WordPress plugin before 1.2.2 does not verify that a booking belongs to the requesting user before modifying or deleting it on two of its booking endpoints, allowing a booking-provider-level user to cancel and permanently delete other providers' bookings on the same site. |
| The Hydra Booking — Appointment Scheduling & Booking Calendar WordPress plugin before 1.2.3 does not verify that the host record being modified belongs to the user making the request, allowing authenticated users holding a Hydra Booking — Appointment Scheduling & Booking Calendar WordPress plugin before 1.2.3-assigned host role to modify other hosts' profile data and reassign ownership of another host's record to themselves. |
| A flaw was found in the Admin REST API of Keycloak, an open-source identity and access management solution. The issue occurs in the group-membership endpoints where the system fails to check if a group grants administrative privileges before allowing a user to be added. This allows a delegated administrator with limited permissions to add themselves to a high-privilege group, potentially gaining full control over the entire realm. |
| A flaw was found in the Admin REST API of Keycloak, an open-source identity and access management solution. The endpoint used for deleting user credentials does not correctly check for fine-grained reset-password permissions. This allows a delegated administrator, who should be restricted from resetting passwords, to delete a user's password credentials, resulting in the user being unable to log in. |
| A flaw has been found in olivier-ls PHP-FTS up to 1.1.2. Affected by this issue is the function SearchEngine::buildHighlights of the file src/SearchEngine.php of the component Search Engine. Executing a manipulation of the argument Query can lead to cross site scripting. The attack may be launched remotely. The exploit has been published and may be used. Upgrading to version 1.1.3 can resolve this issue. This patch is called 0b2fae333d6b022da7ed4c43e2d41aa03f91dff3. The affected component should be upgraded. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uac: validate rate list length before storing
UAC1 and UAC2 configfs rate-list attributes parse a comma-separated
list of sampling rates and store each parsed value in fixed-size arrays.
The arrays have UAC_MAX_RATES entries, but the store paths do not check
that the input contains at most that many tokens before writing through
opts->name##s[i++].
Writing more than ten rates therefore writes past the end of the
p_srates[] or c_srates[] array in struct f_uac1_opts or struct
f_uac2_opts.
With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the
UAC1 p_srate attribute reports:
UBSAN: array-index-out-of-bounds
drivers/usb/gadget/function/f_uac1.c:1669:1
index 10 is out of range for type 'int [10]'
__ubsan_handle_out_of_bounds.cold
f_uac1_opts_p_srate_store
configfs_write_iter
vfs_write
ksys_write
do_syscall_64
The same reproducer against the UAC2 p_srate attribute reports:
UBSAN: array-index-out-of-bounds
drivers/usb/gadget/function/f_uac2.c:2087:1
index 10 is out of range for type 'int [10]'
__ubsan_handle_out_of_bounds.cold
f_uac2_opts_p_srate_store
configfs_write_iter
vfs_write
ksys_write
do_syscall_64
Reject additional tokens once UAC_MAX_RATES entries have been parsed.
Also keep the original kstrdup() pointer for kfree(), because strsep()
advances the parsing cursor. Freeing the advanced cursor leaks the
original buffer on successful parses and can free an interior pointer on
some error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max
check_kfunc_args() detects a kfunc argument named rdonly_buf_size or
rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64,
and does not bound it. check_kfunc_call() later copies that value into
the returned register's mem_size field:
meta->r0_size = reg->var_off.value;
...
regs[BPF_REG_0].mem_size = meta.r0_size;
regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set
gets truncated instead of causing a load-time rejection, so the verifier
records a PTR_TO_MEM register with an approximately 4 GiB mem_size for
whatever allocation the kfunc returned. A later access check against
that register uses the truncated, wrong bound.
Reject rdonly_buf_size/rdwr_buf_size values that exceed U32_MAX at the
point meta->r0_size is set. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix use-after-free on mm_struct in bpf_find_vma()
bpf_find_vma() reads task->mm and calls mmap_read_trylock(mm) without
holding a reference on the mm. On a foreign task, a concurrent exit_mm()
can free the mm_struct between the lockless read and the trylock,
resulting in a use-after-free. mm_struct is not SLAB_TYPESAFE_BY_RCU.
For the current task, task->mm is stable. For a foreign task, pin the mm
under task->alloc_lock and release it with mmput_async(), mirroring commit
d8e27d2d22b6 ("bpf: fix mm lifecycle in open-coded task_vma iterator").
Use spin_trylock() instead of get_task_mm() so BPF context does not block
on alloc_lock. Reject irqs-disabled contexts and !CONFIG_MMU on the
foreign-task path because dropping the mm reference is not safe there.
Race:
CPU0 (BPF program) CPU1 (exiting task)
============================ ==========================
bpf_find_vma(foreign_task):
mm = task->mm
exit_mm():
task->mm = NULL
mmput(mm) -> frees mm_struct
mmap_read_trylock(mm)
// UAF on mm |
