| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
udmabuf: Set the DMA mask for the udmabuf device (v2)
If the DMA mask is not set explicitly, the following warning occurs
when the userspace tries to access the dma-buf via the CPU as
reported by syzbot here:
WARNING: CPU: 1 PID: 3595 at kernel/dma/mapping.c:188
__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188
Modules linked in:
CPU: 0 PID: 3595 Comm: syz-executor249 Not tainted
5.17.0-rc2-syzkaller-00316-g0457e5153e0e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:__dma_map_sg_attrs+0x181/0x1f0 kernel/dma/mapping.c:188
Code: 00 00 00 00 00 fc ff df 48 c1 e8 03 80 3c 10 00 75 71 4c 8b 3d c0
83 b5 0d e9 db fe ff ff e8 b6 0f 13 00 0f 0b e8 af 0f 13 00 <0f> 0b 45
31 e4 e9 54 ff ff ff e8 a0 0f 13 00 49 8d 7f 50 48 b8 00
RSP: 0018:ffffc90002a07d68 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88807e25e2c0 RSI: ffffffff81649e91 RDI: ffff88801b848408
RBP: ffff88801b848000 R08: 0000000000000002 R09: ffff88801d86c74f
R10: ffffffff81649d72 R11: 0000000000000001 R12: 0000000000000002
R13: ffff88801d86c680 R14: 0000000000000001 R15: 0000000000000000
FS: 0000555556e30300(0000) GS:ffff8880b9d00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200000cc CR3: 000000001d74a000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
dma_map_sgtable+0x70/0xf0 kernel/dma/mapping.c:264
get_sg_table.isra.0+0xe0/0x160 drivers/dma-buf/udmabuf.c:72
begin_cpu_udmabuf+0x130/0x1d0 drivers/dma-buf/udmabuf.c:126
dma_buf_begin_cpu_access+0xfd/0x1d0 drivers/dma-buf/dma-buf.c:1164
dma_buf_ioctl+0x259/0x2b0 drivers/dma-buf/dma-buf.c:363
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f62fcf530f9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe3edab9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f62fcf530f9
RDX: 0000000020000200 RSI: 0000000040086200 RDI: 0000000000000006
RBP: 00007f62fcf170e0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f62fcf17170
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
v2: Dont't forget to deregister if DMA mask setup fails. |
| In the Linux kernel, the following vulnerability has been resolved:
media: venus: hfi: avoid null dereference in deinit
If venus_probe fails at pm_runtime_put_sync the error handling first
calls hfi_destroy and afterwards hfi_core_deinit. As hfi_destroy sets
core->ops to NULL, hfi_core_deinit cannot call the core_deinit function
anymore.
Avoid this null pointer derefence by skipping the call when necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Initialize dpi variable to zero
dpi is initialized only for BNXT_RE_ALLOC_WC_PAGE, but copied
for all the cases. So initialize the dpi to 0. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource()
If devm_platform_get_and_ioremap_resource() returns an error,
mlxbf_i2c_init_resource() frees tmp_res before reading tmp_res->io to
get the error code. This results in a use-after-free.
Save the error code before freeing tmp_res. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject command submission on devices without a submit op
amdxdna_cmd_submit() calls xdna->dev_info->ops->cmd_submit()
unconditionally, but only aie2_dev_ops defines that callback.
aie4_vf_ops (the AIE4 SR-IOV virtual function) does not, so a user
AMDXDNA_EXEC_CMD ioctl on an AIE4 device reaches a NULL function-pointer
call and oopses the kernel. AIE4 submits work through a mapped user queue
and doorbell, not this ioctl path.
Reject the submission early with -EOPNOTSUPP when the device provides no
cmd_submit op, so the shared EXEC ioctl is a clean no-op on such devices.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| Improper removal of sensitive information before storage or transfer in .NET allows an unauthorized attacker to disclose information over a network. |
| Integer overflow or wraparound in .NET allows an unauthorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix signed integer truncation in IPC receive
Fix potential buffer overflow where firmware-supplied data_size is cast
to signed int before being used in min_t(). Large unsigned values
(>= 0x80000000) become negative, causing unsigned wraparound and
oversized memcpy operations that can overflow the stack buffer.
Change min_t(int, ...) to min() as both values are unsigned and can be
handled by min() without explicit cast. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush
On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and
flushes every fragment queue that is not yet complete using
inet_frag_queue_flush(). That helper frees all the skbs queued on the
fragment queue but does not set INET_FRAG_COMPLETE, and leaves
q->fragments_tail and q->last_run_head pointing at the freed skbs.
The queue itself stays in the rhashtable.
fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups,
but it cannot stop a fragment that already obtained the queue through
inet_frag_find() earlier and stalled just before taking the queue lock.
Once that fragment resumes after the flush and takes the queue lock,
it passes the INET_FRAG_COMPLETE check and then dereferences the freed
fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of
that pointer and, on the append path, writes ->next_frag, causing a
slab use-after-free. IPv6, nf_conntrack_reasm6 and 6lowpan reassembly
share the same flush path and are affected as well.
Reset rb_fragments, fragments_tail and last_run_head in
inet_frag_queue_flush() so a flushed queue no longer points at the
freed skbs. A fragment that resumes after the flush and takes the
queue lock then finds an empty queue and starts a new run instead of
dereferencing the freed fragments_tail. ip_frag_reinit() already
performed this reset after its own flush, so drop the now duplicate
code there. |
| Out-of-bounds write in .NET allows an unauthorized attacker to execute code locally. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix two unsafe bare decodes in decode_lockers()
decode_lockers() in cls_lock_client.c contains two bare decode operations
that allow a malicious or compromised OSD to trigger slab-out-of-bounds
reads:
1. ceph_decode_32(p) at the num_lockers field has no preceding bounds
check. ceph_start_decoding() accepts struct_len=0 as valid -- the
internal ceph_decode_need(p, end, 0, bad) always passes -- so when an
OSD sends struct_len=0, ceph_start_decoding() returns success with
p == end. The immediately following bare ceph_decode_32(p) then reads
4 bytes past the validated buffer boundary. The garbage value is
passed directly to kzalloc_objs() as the locker count.
The sibling function decode_watchers() in osd_client.c already uses
ceph_decode_32_safe() after its own ceph_start_decoding() call.
decode_lockers() was the only site using the bare variant.
2. ceph_decode_8(p) after the decode_locker() loop has no preceding
bounds check. If an OSD crafts num_lockers such that the loop
advances p exactly to end, the subsequent bare ceph_decode_8(p) reads
one byte past the validated buffer boundary. The result is passed
directly into *type, which is used as a lock type discriminator by
callers, giving an OSD-controlled one-byte OOB read with direct
influence over the lock type field.
Fix both by replacing bare operations with their safe variants:
ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers,
err_inval)
ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type,
err_free_lockers)
The goto targets differ intentionally:
err_inval: is a new label returning -EINVAL directly. It is used for
the pre-allocation failure path where *lockers is not yet allocated
and must not be passed to ceph_free_lockers().
err_free_lockers: is the existing label. It is used for the
post-allocation failure path where *lockers is allocated and must
be freed.
ret is set to -EINVAL before ceph_decode_8_safe() so that
err_free_lockers returns the correct error code on bounds violation.
Without this, err_free_lockers would return a stale ret value (0 from
the successful decode_locker() loop), silently swallowing the error.
-EINVAL is correct for both failure paths. The data received from the
OSD is structurally malformed. -ENOMEM would misrepresent the failure
class to callers and to stable@ backporters triaging error paths.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment can trigger this against any kernel client that issues the
lock.get_info class method (e.g. during RBD exclusive lock acquisition).
[ idryomov: trim changelog, formatting ] |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate ACE size against SID sub-authorities
set_ntacl_dacl() validates sid.num_subauth before copying an ACE, but
does not verify that the declared ACE size contains all sub-authorities
described by that field. An undersized ACE can therefore be copied
and later make the POSIX ACL deduplication walk inspect data beyond
the copied ACE boundary.
The existing initial bound check is also too small. It only ensures
that the ACE size field is accessible before set_ntacl_dacl() reads
sid.num_subauth farther into the input buffer.
Require enough input for the fixed SID header before accessing
num_subauth, reject ACEs smaller than that header, and skip ACEs
whose declared size cannot contain the complete SID. This makes the
validation consistent with the other ACE walk paths. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Prevent interrupt storm on host controller error (HCE)
The xHCI controller reports a Host Controller Error (HCE) in UAS Storage
Device plug/unplug scenarios on Android devices. HCE is checked in
xhci_irq() function and causes an interrupt storm (since the interrupt
isn’t cleared), leading to severe system-level faults.
When the xHC controller reports HCE in the interrupt handler, the driver
only logs a warning and assumes xHC activity will stop as stated in xHCI
specification. An interrupt storm does however continue on some hosts
even after HCE, and only ceases after manually disabling xHC interrupt
and stopping the controller by calling xhci_halt().
Add xhci_halt() to xhci_irq() function where STS_HCE status is checked,
mirroring the existing error handling pattern used for STS_FATAL errors.
This only fixes the interrupt storm. Proper HCE recovery requires resetting
and re-initializing the xHC. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled
HCI_UART_SENDING bit in tx_state means write_work is pending and blocks
queueing it again. Currently this bit is not cleared when canceling the
work in hci_uart_close(), which blocks future writes when device is
reopened later if write_work was pending.
Fix by clearing HCI_UART_SENDING when canceling the work.
Also make clearing of tx_skb safe by using disable_work_sync +
enable_work instead of just cancel_work_sync. hci_uart_flush() purges
the proto tx queue so we can cancel the pending write_work there,
instead of doing it just in hci_uart_close(). Re-enable and possibly
requeue the work after queue flush. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_close() replay
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_close_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix 32-bit overflow in CWSR total size calculation
total_cwsr_size was computed in 32-bit before being used as a BO/SVM
allocation size.
With large ctx_save_restore_area_size and debug_memory_size
multiplied by the XCC count, the product can wrap,
yielding an undersized CWSR save area that firmware later overruns.
Promote total_cwsr_size to u64 and use check_add_overflow()/
check_mul_overflow() in both kfd_queue_acquire_buffers() and
kfd_queue_release_buffers().
(cherry picked from commit 319f7e13423ae3f486b9aea82f9ad2d6af0ee608) |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: tas2781: bound firmware description string parsing
The TAS2781 firmware parser reads several variable-length description
strings with strlen() before checking that the string terminator is
present inside the firmware blob. A malformed firmware image without a
NUL terminator can therefore make the parser walk past the end of the
firmware buffer before the later size checks run.
Add a small bounded string-length helper and use it for all description
fields that are parsed from the firmware buffer. Keep the existing size
checks for the fixed bytes that follow each string. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF in sock clone early bailouts
Similar to recent commit 9b51a6155d14 ("bpf,fork: wipe ->bpf_storage
before bailouts that access it"), sk_clone() performs an initial
shallow copy of the socket field ->sk_bpf_storage via sock_copy()
for the cloned socket newsk.
If sk_clone() bails out early (e.g. if sk_filter_charge() fails) prior
to calling bpf_sk_storage_clone(), newsk->sk_bpf_storage still points
to the parent socket's BPF local storage. When newsk is subsequently
freed via sk_free(), the deallocation path (__sk_destruct() ->
bpf_sk_storage_free()) destroys the parent socket's BPF local storage,
leading to a use-after-free (UAF) on the parent socket.
Fix this by resetting newsk->sk_bpf_storage to NULL immediately after
sock_copy() in sk_clone(), and remove the now redundant initialization
from bpf_sk_storage_clone(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: catc: enable basic endpoint checking
catc_probe() fills three URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX
- usb_rcvintpipe(usbdev, 2) for interrupt status
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a catc_usb_ep enum for endpoint numbers, replacing magic constants
throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints()
calls after usb_set_interface() to verify endpoint types before use,
rejecting devices with mismatched descriptors at probe time.
Similar to
- commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")
which fixed the issue in rtl8150. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: don't re-enter an instance callback that is still running
The userspace-driven timer (utimer) TRIGGER ioctl calls
snd_timer_interrupt() directly with no serialization, so two threads
triggering the same utimer can run snd_timer_interrupt() on one
snd_timer concurrently.
snd_timer_process_callbacks() drops timer->lock around each instance
callback and marks the in-flight callback with the single
SNDRV_TIMER_IFLG_CALLBACK bit; snd_timer_close_locked() waits on that
bit to drain an in-flight callback before freeing the instance. The bit
cannot represent two concurrent callbacks: when a second interrupt
re-queues an instance whose callback is still running, both run at once,
the first to finish clears the bit, and the close-path drain then frees
the instance (and its callback_data) while the other callback is still
live - a use-after-free reachable by any user able to open
/dev/snd/timer, both via a user timer instance and via a sequencer queue
timer bound to the utimer.
snd_timer_interrupt() sets IFLG_CALLBACK before dropping timer->lock, so
a concurrent interrupt already observes it under the lock. Skip
re-queuing an instance (and its slaves) to the ack/sack list while its
callback is in flight; the accumulated pticks are delivered on the next
tick, so no event is lost. |
