| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: fix typec switch leak on probe error path
If probe fails after imx95_usb_phy_get_tca() succeeds, the typec
switch leaks because the only cleanup path was in .remove(), which
never runs on probe failure.
Use devm_add_action_or_reset() so the switch is cleaned up on both
probe failure and driver removal. The imx95_usb_phy_put_tca() is no
longer needed, it will be removed in .remove() too. |
| OpenClaw versions >= 2026.3.25 and < 2026.8.1 apply invalid-token rate limiting for Synology Chat webhooks before authentication and key the limit on the raw proxy socket address. In deployments where OpenClaw sits behind a trusted reverse proxy or tunnel and multiple external clients share a single socket address, an unauthenticated sender can exhaust the shared invalid-token budget, causing subsequent legitimate Synology Chat webhook callbacks to be rejected until the rate-limit window expires. The attacker cannot obtain a valid token or read message data; the impact is temporary loss of channel availability. Fixed in 2026.8.1. |
| OpenClaw before 2026.8.2 contains a denial of service vulnerability in the Browser extension relay that allows unauthenticated network sources to exhaust pending-authentication capacity. Attackers can hold every pending slot by maintaining silent WebSocket upgrades, preventing paired extensions from completing Browser Relay Authentication v2. |
| A flaw was found in rpcbind. This vulnerability allows a remote, unauthenticated attacker to cause a Denial of Service (DoS) by sending a large number of unique requests. The rpcbind service records previously unseen RPC (Remote Procedure Call) statistics in unbounded in-memory lists, leading to persistent memory growth and increased CPU usage. This can degrade or exhaust service availability. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Apple Preferred Executable Format loader was vulnerable because the PEF loader accepted relocSecCount values that were not bounded by the number of sections or complete relocation records in the input. The vulnerability is triggered by normal binary-format auto-detection of a small crafted Apple PEF file. The loader could perform up to 268,435,456 relocation-section iterations and repeated buffer operations after record offsets passed the end of the file. This can cause denial of service through excessive CPU consumption and prolonged processing. This issue is fixed in version 6.2.0. |
| Uncontrolled Resource Consumption (CWE-400 / CWE-407) in the ANTLR 3 search query parser (QueryParser / Query.g) in Gerrit Code Review versions 2.0.19 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an unauthenticated remote attacker (or an authenticated user if anonymous read access is disabled) to cause a persistent denial of service (CPU exhaustion and HTTP worker thread pool starvation requiring a server restart) via crafted search queries containing deeply nested parentheses sent to query evaluation endpoints (/changes/?q=, /accounts/?q=, /groups/?query=, /projects/?query=, /Documentation/?q=, /changes/{id}/query?expression=, or SSH gerrit query). Because syntactic predicates in conditionOr and conditionAnd recurse via conditionBase without memoization prior to capability or visibility checks and worker threads do not abort when the client disconnects, a small number of requests (such as 25 requests matching default httpd.maxThreads) can permanently pin all HTTP worker threads. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. |
| zbateson/mail-mime-parser is a mail mime parser alternative to PHP's imap* functions and Pear libraries for reading messages in Internet Message Format RFC 822. Starting in version 2.0.0 and prior to version 3.0.6 and 4.0.2, an uncontrolled resource consumption / algorithmic complexity vulnerability (CWE-400) affects any application that parses untrusted email with this library. Three independent parsing paths are super-linear in cost, so a byte-size cap on the caller side does **not** bound the work done. A crafted message under 2 MB can consume seconds of CPU or hundreds of megabytes to multiple gigabytes of memory (leading to an out-of-memory kill), enabling denial of service. The parse is lazy, but the cost is paid on the first `getAllParts()` or content read. This is fxed in 4.0.2 and 3.0.6. The fixes add configurable limits on multipart nesting depth and on header count / total header size (recording a parse error past the threshold rather than throwing), and change sibling append to O(n). Users should upgrade to one of these (or later) versions. Versions 2.x are also affected but are end-of-life and will not receive patches; users on those lines should upgrade to a fixed release. (Versions prior to 2.0 used a different parser and are not affected by all three paths.) These costs are super-linear, so an input byte-size cap alone does not bound them. Until upgrading, restrict exposure of the parser to untrusted input, and run parsing under a constrained memory_limit and execution time limit so a malicious message fails its own request rather than exhausting the host. |
| When Neethi fetches a remote policy reference, it only limits the time per read, not the whole transfer, so a server that trickles bytes slowly can keep the fetch alive indefinitely and tie up the calling thread (denial of service).
Users are recommended to upgrade to version 3.2.4, which fixes this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/secretmem: properly account locked pages
secretmem accounts folios by treating memory as if it were mlock()'d and
thus limited by the RLIMIT_MEMLOCK limit.
However the folios are unevictable and remain so until the inode is
evicted, eliminating usual mlock() semantics - mapping folios then
unmapping them does not clear their unevictable state, since it depends on
AS_UNEVICTABLE, not PG_mlocked.
A user can therefore easily work around the RLIMIT_MEMLOCK limit - simply
map then unmap and VmLck no longer counts the secretmem range. Worse,
folios are not accounted in the process's RSS, meaning the OOM killer
won't know to kill the process.
Repeatedly mapping/unmapping (or forking) can then result in the
consumption of all available system memory with unevictable folios and
cause system instability.
A secretmem fd can be passed between processes and over fork so a
per-process limit simply does not make sense, so follow the precedent set
by io_uring, perf, skbuff, iommufd and xdp by tracking the number of
locked pages in user_struct->locked_vm.
Since the scope tracked is actually inode lifetime, the RLIMIT_MEMLOCK
applies per-user not per-process, so it doesn't make sense to bypass for
users with CAP_IPC_LOCK, therefore remove this bypass.
There is simply no reason to carry on marking the mapping as mlock()'d
since it's misleading and the lifecycle is now correctly handled, so
remove this too.
Note that secretmem does not support any form of truncation (including
hole punching) and the folios are unreclaimable, so the folios need only
be accounted on fault and unaccounted on inode destruction.
__secretmem_account_pages() is more or less a duplicate of the code that
io_uring etc. use, but since this is a bug fix that needs backporting,
defer any de-duplication efforts to a follow-up.
test_mlock_limit() asserts mlock_future_ok() on mmap(), however this has
been removed, so remove the test altogether for the fix. A new test will
be sent separately for upstream. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: do not use make_bad_inode() in ocfs2_read_inode_block_full()
This reverts commit 58b6fcd2ab34 ("ocfs2: mark inode bad upon validation
failure during read").
Since 'make_bad_inode()' resets inode type to S_IFREG, doing this for
directory inode during active VFS lookup is likely to confuse the latter,
including VFS_BUG_ON_INODE() triggered in this case. |
| Docmost is open-source collaborative wiki and documentation software. From 0.21.0 until 0.95.0, any authenticated workspace member with edit rights to a space can upload an archive to the page-import feature whose ZIP extraction routine does not limit total uncompressed size, per-entry size, or entry count. The extractor writes entries to the server temp directory and automatically extracts one nested ZIP, allowing an outer upload within the default 200 MB limit to expand by multiple GB. The resulting disk exhaustion can crash the import worker and degrade or take down the instance for all tenants. This issue is fixed in version 0.95.0. |
| Uncontrolled Resource Consumption (CWE-400 / CWE-1333) in regex search query predicates (such as RegexProjectPredicate, RegexRefPredicate, RegexPathPredicate, and sibling predicates) and REST regex filter endpoints (RegexListSearcher /projects/?r= and RefFilter /projects/{project}/branches/?r=) in Gerrit Code Review versions 2.1.6 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an unauthenticated remote attacker (or an authenticated user if anonymous read access is disabled) to cause a denial of service (CPU starvation and JVM heap exhaustion / OutOfMemoryError) via crafted search queries or REST API requests containing regular expressions with large counted repetitions or exponential DFA determinization patterns. Because the user-supplied regular expression is compiled into an unbounded dk.brics.automaton instance (new RegExp(re).toAutomaton()) on the request thread prior to index evaluation or access control visibility filtering, trivial queries can exhaust JVM heap or pin request threads regardless of heap size. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. |
| MKP is a Model Context Protocol server for Kubernetes. Prior to 0.4.1, cmd/server/main.go exposes the default HTTP endpoint and pkg/mcp/server.go registers the unauthenticated get_resource tool, which accepts attacker-controlled limitBytes and tailLines values for the pods logs subresource. buildPodLogOpts() in pkg/k8s/subresource.go parses those values as unbounded int64 parameters, and defaultGetPodLogs() copies the returned Kubernetes log stream through io.Copy into an in-memory bytes.Buffer without an application-side cap. A remote attacker who can reach the default port 8080 MCP endpoint and select a pod with sufficiently large accumulated logs can send one tools/call request that causes large allocations and additional response copies, while the request-frequency limiter does not constrain per-request volume. This can exhaust process memory, terminate the MKP server, and deny the MCP service; observed testing showed more than one GiB of RSS growth while handling a 128 MiB requested stream. This issue is fixed in version 0.4.1. |
| ASP.NET Core Kestrel in Microsoft .NET 8.0 before 8.0.22 and .NET 9.0 before 9.0.11 allows a remote attacker to cause excessive CPU consumption by sending a crafted QUIC packet, because of an incorrect exit condition for HTTP/3 Encoder/Decoder stream processing. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.2.7 and 4.3.1, rabbit_pid_codec:decompose_from_binary/1 parses a caller-supplied ETF-encoded binary and calls binary_to_atom(Node, utf8) on the node-name field. It is reached from rabbit_volatile_queue:pid_from_name/2, which is invoked for any queue name / routing key beginning amq.rabbitmq.reply-to.. The CandidateNodes membership check happens after the atom is created, and the surrounding try/catch cannot reclaim atoms (they are never GC'd). binary_to_existing_atom is not used. Any authenticated AMQP client can crash the entire Erlang VM (all vhosts, all connections) with ~1M cheap requests. Preconditions include Authenticated AMQP 0-9-1 connection to any vhost No per-connection rate limit low enough to make ~1M operations infeasible. This issue is fixed in versions 4.2.7 and 4.3.1. |
| A weakness has been identified in kvcache-ai mooncake up to 0.3.12/0.3.14-rc1. Impacted is the function MasterService::GetReplicaListByRegex of the component Regular Expression Handler. Executing a manipulation can lead to allocation of resources. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, add_vhost/2 calls rabbit_data_coercion:atomize_keys/1 (the unsafe variant using binary_to_atom) on the vhost metadata map. The 20 MB management body limit fits ~1M+ short keys. Admin-only. An administrator importing a crafted definitions file can crash the node in a single request: a vhosts entry with ~1M unique metadata keys exhausts the atom table during import. Preconditions include administrator tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0, When a binding is created on an x-jms-topic exchange, add_binding/3 reads the rjms_erlang_selector argument and passes it through erl_scan:string/1 then erl_parse:parse_term/1. erl_scan:string/1 interns every atom literal it tokenizes. validate_binding/2 is a no-op (-> ok.), there is no length cap, and the surrounding try/catch cannot reclaim atoms. The Java JMS client compiles selectors client-side, but the server does not enforce this , a raw AMQP client can send arbitrary selector strings. An authenticated low-privilege AMQP user confined to one vhost can crash the entire broker node (cross-tenant DoS) in <100 bind calls. Preconditions include rabbitmq_jms_topic_exchange plugin enabled (bundled; required for any JMS deployment) Authenticated AMQP user with read on an x-jms-topic exchange + write on a queue (or configure to declare both). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, get_chunk_selector/1 calls binary_to_atom on the raw client-supplied <<"chunk_selector">> property from post-auth subscribe and resolve_offset_spec frames, with no whitelist and no existing guard. An authenticated stream client with read access to any stream can crash the broker node. Preconditions include rabbitmq_stream plugin enabled Authenticated stream-protocol user with read access to at least one stream. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. |
| hpack is an HTTP/2 Header Encoding for Python. Prior to version 4.2.0, unbounded variable integer decoding can cause run-away computation on malformed input leading to O(n^2) runtime, effectively blocking further processing with large enough unsanitized input. A fix is available in python-hyper/hpack v4.2.0 to restricted variable integer decoding to uint32 to prevent run-away computation. As a workaround, sanitize input to hpack decoder for long sequences of `0xFF` values to prevent malicious use. |
