| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in libssh. A malicious SFTP server can send responses for unknown request IDs that libssh clients keep queued indefinitely, causing unbounded memory growth and client-side denial of service. |
| A flaw was found in libssh. A malicious username expanded through %r in ProxyCommand handling can inject shell metacharacters, exposing environment variables and causing unintended shell behavior. |
| A flaw was found in libssh. When ProxyCommand is used, an unchecked fork() failure can be stored as process ID -1; during cleanup, signals may then be sent across the caller's accessible process tree, leading to local denial of service. |
| A flaw was found in libssh. A remote authenticated client can issue SSH_FXP_READ requests with an arbitrarily large length, causing a libssh SFTP server to allocate excessive memory and potentially exhaust it through repeated requests. |
| A flaw was found in libssh. A remote authenticated peer can advertise a zero maximum packet size in SSH_MSG_CHANNEL_OPEN, causing later channel writes to loop indefinitely and consume CPU, leading to denial of service. |
| This CVE ID has been rejected as a duplicate. |
| This CVE ID has been rejected as a duplicate. |
| This CVE ID has been rejected as a duplicate. |
| This CVE ID has been rejected as a duplicate. |
| This CVE ID has been rejected as a duplicate. |
| A vulnerability has been found in NousResearch hermes-agent up to 0.18.2. This affects the function HermesACPAgent.prompt of the file acp_adapter/session.py of the component ACP Prompt Workflow. Such manipulation leads to denial of service. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper Handling of Case Sensitivity vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by requesting them with different casing, on deployments whose filesystem is case-insensitive.
mod_auth:secret_path/3 decides whether a resolved filesystem path lies inside a protected directory block by running the configured directory path through re:run/3 without the caseless option. A request for /secret/file against a directory configured as /Secret therefore does not match, so the request is treated as unprotected and no authentication challenge is issued, while the filesystem resolves the differently cased path to the same file and mod_get serves it. Deployments on case-sensitive filesystems are unaffected, because there the filesystem itself rejects the mismatched casing.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| Path Equivalence vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by prefixing the request path with an extra slash.
httpd_request:validate_uri/1 normalises the request URI with uri_string:normalize/1, which performs RFC 3986 dot-segment removal but does not collapse empty path segments, so a doubled slash survives. mod_alias:real_name/3 concatenates the document root with that URI, and mod_auth:secret_path/3 then decides whether the result lies inside a protected directory block by running the configured directory path as an unanchored regular expression against it. The doubled slash breaks the contiguous substring the regex needs, so the request is treated as unprotected and no authentication challenge is issued, while mod_get opens the same path and the operating system collapses the doubled slash and returns the protected file. The same path mismatch also evades the per-path accounting in mod_security.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| Incorrect Authorization vulnerability in ash-project ash returns records that a runtime read policy denies to any actor.
When a resource has an access_type :runtime read policy (a check evaluated per record rather than compiled to a filter), Ash.Policy.Authorizer decides each record in check_result/1 (lib/ash/policy/authorizer/authorizer.ex) by discarding impossible policy scenarios and inspecting what remains. When every scenario for a record was impossible, meaning no policy can authorize it and it must be forbidden, the empty-scenario branch instead kept the record ({[record | data], authorizer, any_forbidden?}) and returned it as authorized. As a result, records the runtime read policy denies are returned to any actor. The fix forbids a record whose scenarios are all impossible.
This issue affects ash: from 3.4.44 before 3.32.2. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in ash-project ash_cloak allows anyone with access to logs, error trackers, or crash reports, or anyone who can trigger a validation error, to recover the plaintext of a field the library encrypts.
AshCloak.Transformers.SetUpEncryption removes each cloaked attribute from the action's accept list and adds an action argument that carries the plaintext into the encryption change. That argument is built with sensitive?: attr.sensitive?, inheriting the flag from the source attribute, so a cloaked attribute declared without sensitive? true produces a non-sensitive argument. It is the only place the cleartext value lives, and the one place Ash will not redact: it appears verbatim in inspect(changeset), Ash.Error.Invalid and validation error messages, telemetry, :sys dumps, and error-tracker payloads. The generated encrypted attribute and decrypt calculation are already hardcoded sensitive.
This issue affects ash_cloak: from 0.1.0 before 0.4.0. |
| Deserialization of Untrusted Data vulnerability in ash-project ash_cloak allows an attacker who can influence the bytes of an encrypted column to crash the BEAM node, by triggering unbounded atom creation or a decompression bomb during decryption.
AshCloak.Calculations.Decrypt decodes the decrypted binary with Ash.Helpers.non_executable_binary_to_term/1 without the :safe option, so atoms in the payload are interned during the decode and never garbage collected, and the term format's compressed form is inflated transparently. vault.decrypt!() is the only barrier and stops tampering only for an authenticated cipher. Cloak also ships the unauthenticated AES.CTR, whose ciphertext an attacker who knows their own plaintext can XOR into any same-length payload without the key, so an ordinary read of the forged column reaches the decoder. A few hundred kilobytes of distinct atoms exhausts the atom table, or a small compressed payload inflates to gigabytes.
This issue affects ash_cloak: from 0.1.0 before 0.4.0. |
| Unchecked Return Value vulnerability in ash-project ash_postgres allows a user who can drive a tenant rename to a name that collides with an existing tenant's schema to have their tenant record repointed at that other tenant's live schema, gaining access to its data.
AshPostgres.MultiTenancy.rename_tenant/3 issues the ALTER SCHEMA ... RENAME TO ... with the non-raising Ecto.Adapters.SQL.query/2, discards its {:ok, _} | {:error, _} result, and unconditionally returns :ok. PostgreSQL rejects the rename when the target schema already exists (and on insufficient privilege or lock timeout), but that failure never reaches the caller. The calling manage_tenant update action therefore sees success and commits the tenant row with the new name, which is the schema of a different existing tenant, so subsequent reads and writes for that tenant run against the other tenant's data.
This issue affects ash_postgres: from 0.25.0 before 2.13.0. |
| Improper Validation of Specified Quantity in Input vulnerability in Erlang/OTP snmp allows a remote attacker to degrade availability by sending an SNMP message containing a BER INTEGER whose length field is arbitrarily large.
snmp_pdus:dec_integer_notag/1 defaults its size limit to infinity, and do_dec_integer_notag/2 then accumulates the value across every declared byte with a recursive shift and bitwise or. Work grows superlinearly in the declared length because each operation acts on a progressively larger bignum. The size-limited variant dec_integer_notag/2 exists but is reached from only one call site, dec_snmp_version/1, which bounds the version field to ten bytes; the request identifier, error status and index, generic and specific trap fields, engine boots and time, and every varbind value decoded by dec_value/1 all use the unbounded form. The decode runs before the PDU is processed, so no valid request is required beyond what the deployment demands to accept the message at all.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to snmp from 4.25.1 before 5.18.2.1, from 5.19 before 5.20.2.2, and from 5.20.3 before 5.20.5. Whether OTP before OTP 17.0, corresponding to snmp before 4.25.1, is affected is unknown. |
| Improper Validation of Specified Quantity in Input vulnerability in ash-project ash allows an attacker to submit a non-finite decimal value that bypasses numeric bounds constraints or fails later operations on the value.
Ash.Type.Decimal cast input through Ecto's decimal cast in cast_input/2 and cast_stored/2 (lib/ash/type/decimal.ex) without checking that the resulting value is finite. Elixir's Decimal represents Infinity and NaN as valid structs, so a value such as "Infinity" or "NaN" passed casting and was persisted. Because NaN compares as false against every bound, min and max constraints do not reject it, and the stored special value later raises when used in Decimal arithmetic or is refused by the data layer, failing subsequent requests. The fix rejects any non-finite Decimal during casting.
This issue affects ash: from 1.28.0 before 3.32.2. |
| Improper Input Validation vulnerability in ash-project ash_typescript allows a remote attacker to submit argument values outside a declared allowlist or bound on typed-controller routes.
AshTypescript.TypedController.RequestHandler in lib/ash_typescript/typed_controller/request_handler.ex calls Ash.Type.cast_input/3 and treats an {:ok, cast} result as fully validated. In Ash these are separate steps: cast_input/3 only coerces the term, while every constraint declared on the argument is applied by Ash.Type.apply_constraints/3, which this path never calls. Constraints such as one_of, max_length, min and max, and match are therefore inert, so a value outside a declared allowlist is accepted and passed to the route handler. Codegen renders the same constraints into the generated TypeScript types, so an allowlist appears enforced to a TypeScript caller while any other HTTP client ignores it. Empty-string to nil normalization also lives in apply_constraints, so the allow_nil?: false check accepts "" for a required argument.
Where a constraint gates a role, a status, or a sort direction, this becomes a privilege or state-machine bypass.
This issue affects ash_typescript: from 0.15.0 before 0.18.0. |
