Export limit exceeded: 15465 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22411 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68437 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fit paired fragment job in the correct CCCB For geometry jobs with a paired fragment job, at the moment, the DRM scheduler's prepare_job() callback: - checks for internal (driver) dependencies for the geometry job; - calls into pvr_queue_get_paired_frag_job_dep() to check for external dependencies for the fragment job (the two jobs are submitted together but the common scheduler code doesn't know about it, so this needs to be done at this point in time); - calls into the prepare_job() callback again, but for the fragment job, to check its internal dependencies as well, passing the fragment job's drm_sched_job and the geometry job's drm_sched_entity / pvr_queue. The problem with the last step is that pvr_queue_prepare_job() doesn't always take the mismatched fragment job and geometry queue into account, in particular when checking whether there is space for the fragment command to be submitted, so the code ends up checking for space in the geometry (i.e. wrong) CCCB. The rest of the nested prepare_job() callback happens to work fine at the moment as the other internal dependencies are not relevant for a paired fragment job. Move the initialisation of a paired fragment job's done fence and CCCB fence to pvr_queue_get_paired_frag_job_dep(), inferring the correct queue from the fragment job itself. This fixes cases where prepare_job() wrongly assumed that there was enough space for a paired fragment job in its own CCCB, unblocking run_job(), which then returned early without writing the full sequence of commands to the CCCB. The above lead to kernel warnings such as the following and potentially job timeouts (depending on waiters on the missing commands): [ 552.421075] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#2: kworker/u16:5/63 [ 552.421230] Modules linked in: [ 552.421592] CPU: 2 UID: 0 PID: 63 Comm: kworker/u16:5 Tainted: G W 7.0.0-rc2-gc5d053e4dccb #39 PREEMPT [ 552.421625] Tainted: [W]=WARN [ 552.421637] Hardware name: Texas Instruments AM625 SK (DT) [ 552.421655] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched] [ 552.421744] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 552.421766] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] [ 552.421850] lr : pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr] [ 552.421923] sp : ffff800084c47650 [ 552.421936] x29: ffff800084c47740 x28: 0000000000000df8 x27: ffff800088a77000 [ 552.421979] x26: 0000000000000030 x25: ffff800084c47680 x24: 0000000000001000 [ 552.422017] x23: ffff800084c47820 x22: 1ffff00010988ecc x21: 0000000000000008 [ 552.422055] x20: 0000000000000208 x19: ffff000006ad5a88 x18: 0000000000000000 [ 552.422093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000 [ 552.422130] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 552.422167] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3 [ 552.422204] x8 : 00000000f2f2f200 x7 : ffff700010988ecc x6 : 0000000000000008 [ 552.422241] x5 : 0000000000000000 x4 : 1ffff0001114ee00 x3 : 0000000000000000 [ 552.422278] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f [ 552.422316] Call trace: [ 552.422330] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P) [ 552.422411] pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr] [ 552.422486] pvr_queue_run_job+0x3a4/0x990 [powervr] [ 552.422562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched] [ 552.422623] process_one_work+0x520/0x1288 [ 552.422657] worker_thread+0x3f0/0xb3c [ 552.422679] kthread+0x334/0x3d8 [ 552.422706] ret_from_fork+0x10/0x20 | ||||
| CVE-2026-68412 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan() If the test against IEEE80211_MAX_SSID_LEN fails, then 'creq' leaks. Use the existing error handling path to fix it. | ||||
| CVE-2026-68421 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 0.0 Low |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on core-sched forced idle in put_prev_task_scx() put_prev_task_scx() warns when a runnable task drops to a lower sched_class without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have kept it running. Core scheduling breaks that: a forced-idle SMT sibling reschedules through the core_pick fast path in pick_next_task(), which skips pick_task_scx() and thus balance_one(), so a runnable task can drop to idle with ENQ_LAST unset. Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core scheduling forced the idle, while a match (or core scheduling off) still catches a genuine missing-ENQ_LAST drop. | ||||
| CVE-2026-3482 | 3 Ibm, Linux, Microsoft | 5 Aix, Sterling B2b Integrator, Sterling File Gateway and 2 more | 2026-08-12 | 5.3 Medium |
| IBM Sterling B2B Integrator and IBM Sterling File Gateway 6.2.0.0 through 6.2.0.5_2, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 could allow an unauthenticated user to read sensitive information by bypassing authentication through a specially crafted HTTP request. | ||||
| CVE-2026-68416 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: fix double free and WARN_ON in add_mtd_device() error paths When device_register() or mtd_nvmem_add() fails inside add_mtd_device() for a partition, the error handling triggers mtd_release() via put_device() or device_unregister(). mtd_release() calls release_mtd_partition() which frees the mtd_info structure. However, callers such as mtd_add_partition() and add_mtd_partitions() also call free_partition() in their error paths, resulting in a double free. Additionally, release_mtd_partition() hits WARN_ON(!list_empty( &mtd->part.node)) because the partition node is still linked in the parent's partitions list when the release callback fires from the add_mtd_device() error path. Fix this by overriding dev->type and dev->release before put_device() in the error paths, so that device_release() invokes a no-op function instead of mtd_release(). For the mtd_nvmem_add() failure case, device_unregister() is replaced with device_del() to separate the device removal from the final kobject reference drop, allowing the override to take effect before put_device() is called. The callers' error paths (list_del + free_partition) remain the sole owners of mtd_info lifetime on add_mtd_device() failure, which is the expected contract. The normal partition teardown path is not affected: del_mtd_device() goes through kref_put() -> mtd_device_release() -> device_unregister() with dev->type still set to &mtd_devtype, so mtd_release() -> release_mtd_partition() continues to work correctly for the regular removal case. | ||||
| CVE-2026-68423 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy() mtd_concat_destroy() frees item->concat so calling mtd_virt_concat_put_mtd_devices(item->concat) after that leads to a use-after-free. Fix it by moving mtd_virt_concat_put_mtd_devices() before mtd_concat_destroy(). | ||||
| CVE-2026-64230 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: tps65219: fix irq_data.rdev not being assigned Commit 64a6b577490c ("regulator: tps65219: Remove debugging helper function") removed the tps65219_get_rdev_by_name() helper along with the irq_data.rdev assignment that depended on it. This left irq_data.rdev uninitialized for all IRQs, causing undefined behavior when regulator_notifier_call_chain() is called from the IRQ handler: Internal error: Oops: 0000000096000004 pc : regulator_notifier_call_chain lr : tps65219_regulator_irq_handler Call trace: regulator_notifier_call_chain tps65219_regulator_irq_handler handle_nested_irq regmap_irq_thread irq_thread_fn irq_thread kthread ret_from_fork Instead of restoring a dedicated lookup array, restructure the probe function to combine regulator registration with IRQ registration in the same loop. This way the rdev returned by devm_regulator_register() is naturally available for assigning to irq_data.rdev without any auxiliary data structure. Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any registered regulator are registered with rdev=NULL, and the IRQ handler is protected with a NULL check to avoid crashing. | ||||
| CVE-2022-50073 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null Fixes a NULL pointer derefence bug triggered from tap driver. When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null (in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb) virtio_net_hdr_to_skb calls dev_parse_header_protocol which needs skb->dev field to be valid. The line that trigers the bug is in dev_parse_header_protocol (dev is at offset 0x10 from skb and is stored in RAX register) if (!dev->header_ops || !dev->header_ops->parse_protocol) 22e1: mov 0x10(%rbx),%rax 22e5: mov 0x230(%rax),%rax Setting skb->dev before the call in tap.c fixes the issue. BUG: kernel NULL pointer dereference, address: 0000000000000230 RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap] Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48 RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010 RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300 RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8 R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6 FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0 Call Trace: tap_get_user+0x3f1/0x540 [tap] tap_sendmsg+0x56/0x362 [tap] ? get_tx_bufs+0xc2/0x1e0 [vhost_net] handle_tx_copy+0x114/0x670 [vhost_net] handle_tx+0xb0/0xe0 [vhost_net] handle_tx_kick+0x15/0x20 [vhost_net] vhost_worker+0x7b/0xc0 [vhost] ? vhost_vring_call_reset+0x40/0x40 [vhost] kthread+0xfa/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 | ||||
| CVE-2026-64231 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: don't dump registers past the mapped region On DSI 6G platforms the IO address space is internally adjusted by io_offset. Later this adjusted address might be used for memory dumping. However the size that is used for memory dumping isn't adjusted to account for the io_offset, leading to the potential access to the unmapped region. Lower ctrl_size by the io_offset value to prevent access past the mapped area. msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P) msm_dsi_host_snapshot+0x4c/0x78 [msm] msm_dsi_snapshot+0x28/0x50 [msm] msm_disp_snapshot_capture_state+0x74/0x140 [msm] msm_disp_snapshot_state_sync+0x60/0x90 [msm] _msm_disp_snapshot_work+0x30/0x90 [msm] kthread_worker_fn+0xdc/0x460 kthread+0x120/0x140 Patchwork: https://patchwork.freedesktop.org/patch/721747/ | ||||
| CVE-2026-64233 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind uvc_function_bind() walks &opts->extension_units twice without holding opts->lock: - directly, for the iExtension string-descriptor fixup loop; - indirectly, four times via uvc_copy_descriptors() (once per speed), where the helper iterates uvc->desc.extension_units (which aliases &opts->extension_units) to size and emit XU descriptors. The configfs side (uvcg_extension_make / uvcg_extension_drop, in drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its list_add_tail / list_del operations. A privileged userspace process that holds the configfs subtree open and writes the gadget UDC name to bind the function while concurrently rmdir()'ing an extensions subdir can race uvcg_extension_drop() against the bind-time list walks and dereference a freed struct uvcg_extension. Hold opts->lock from the start of the XU string-descriptor fixup through the last uvc_copy_descriptors() call, releasing on the descriptor-error path via a new error_unlock label that drops the lock before falling through to the existing error label. This matches the locking discipline of the configfs callbacks and removes the only remaining unsynchronised reader of the XU list during bind. Reachability: only privileged processes that can mount configfs and write to gadget UDC files can trigger the race, so this is a correctness fix rather than a security boundary. | ||||
| CVE-2026-64234 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: pch_uart: add check for dma_alloc_coherent() Add a check for dma_alloc_coherent() failure to prevent a potential NULL pointer dereference in dma_handle_rx(). Properly release DMA channels and the PCI device reference using a goto ladder if the allocation fails. | ||||
| CVE-2026-64236 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: davinci: fix division by zero on missing clock-frequency When the 'clock-frequency' property is missing from the device tree, the driver falls back to DAVINCI_I2C_DEFAULT_BUS_FREQ. However, this macro was defined in kHz (100), whereas the device tree property is expected in Hz. The probe function divided the fallback value by 1000, causing integer truncation that resulted in dev->bus_freq = 0. This triggered a deterministic division-by-zero kernel panic when calculating clock dividers later in the probe sequence. Fix this by redefining DAVINCI_I2C_DEFAULT_BUS_FREQ in Hz (100000) to match the expected device tree property unit, allowing the existing division logic to work correctly for both cases. | ||||
| CVE-2026-64237 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: elan_i2c - validate firmware size before use Ensure that the firmware file is large enough to contain the expected number of pages and the signature (which resides at the end of the firmware blob) before accessing them to prevent potential out-of-bounds reads. | ||||
| CVE-2026-68347 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix IRQ unsafe locking in gdom allocation Lockdep complains: [ 259.410489] ===================================================== [ 259.417287] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 259.424667] 7.0.0-g51db1d8d2113 #54 Not tainted [ 259.429718] ----------------------------------------------------- [ 259.436516] qemu-system-x86/10143 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 259.444670] ff3b2b1c60305170 (&xa->xa_lock#25){+.+.}-{3:3}, at: __domain_flush_pages+0x17c/0x4b0 [ 259.454485] and this task is already holding: [ 259.460991] ff3b2b1c98504cc0 (&domain->lock){-.-.}-{3:3}, at: amd_iommu_iotlb_sync+0x25/0x60 [ 259.470408] which would create a new lock dependency: [ 259.476041] (&domain->lock){-.-.}-{3:3} -> (&xa->xa_lock#25){+.+.}-{3:3} [ 259.483615] but this new dependency connects a HARDIRQ-irq-safe lock: [ 259.492447] (&domain->lock){-.-.}-{3:3} [ 259.492449] ... which became HARDIRQ-irq-safe at: [ 259.503705] lock_acquire+0xb6/0x2e0 [ 259.507790] _raw_spin_lock_irqsave+0x3e/0x60 [ 259.512748] amd_iommu_flush_iotlb_all+0x20/0x50 [ 259.517996] iommu_dma_free_iova.isra.0+0x1b8/0x1e0 [ 259.523534] __iommu_dma_unmap+0xc2/0x140 [ 259.528100] iommu_dma_unmap_phys+0x55/0xc0 [ 259.532863] dma_unmap_phys+0x274/0x2e0 [ 259.537238] dma_unmap_page_attrs+0x17/0x30 [ 259.542000] nvme_unmap_data+0x13e/0x280 [ 259.546473] nvme_pci_complete_batch+0x45/0x70 [ 259.551524] nvme_irq+0x83/0x90 [ 259.555123] __handle_irq_event_percpu+0x92/0x360 [ 259.560466] handle_irq_event+0x39/0x80 [ 259.564841] handle_edge_irq+0xb2/0x1a0 [ 259.569214] __common_interrupt+0x4e/0x130 [ 259.573882] common_interrupt+0x88/0xa0 [ 259.578256] asm_common_interrupt+0x27/0x40 [ 259.583019] cpuidle_enter_state+0x119/0x5d0 [ 259.587877] cpuidle_enter+0x2e/0x50 [ 259.591962] do_idle+0x153/0x2c0 [ 259.595657] cpu_startup_entry+0x29/0x30 [ 259.600128] start_secondary+0x118/0x150 [ 259.604601] common_startup_64+0x13e/0x141 [ 259.609266] to a HARDIRQ-irq-unsafe lock: [ 259.615384] (&xa->xa_lock#25){+.+.}-{3:3} [ 259.615386] ... which became HARDIRQ-irq-unsafe at: [ 259.627039] ... [ 259.627039] lock_acquire+0xb6/0x2e0 [ 259.633071] _raw_spin_lock+0x2f/0x50 [ 259.637250] amd_iommu_alloc_domain_nested+0x140/0x3c0 [ 259.643078] iommufd_hwpt_alloc+0x272/0x800 [iommufd] [ 259.648813] iommufd_fops_ioctl+0x14e/0x200 [iommufd] [ 259.654547] __x64_sys_ioctl+0x9d/0xf0 ... Since amd_iommu_domain_flush_pages() necessarily holds domain->lock to do the flush, switch the allocation side in gdom_info_load_or_alloc_locked() to HARDIRQ-safe allocation. The IOMMU_DESTROY->free path has the same issue, so switch that path to HARDIRQ-safe locking as well. | ||||
| CVE-2026-68358 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nzxt-kraken3) Stop device IO before calling hid_hw_stop Calling hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within the driver probe function. If the probe operation fails after "io start" has been initiated, this race condition will result in a UAF vulnerability. Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop(). | ||||
| CVE-2026-49743 | 3 Google, Imaginationtech, Linux | 4 Android, Ddk, Graphics Ddk and 1 more | 2026-08-12 | 7.8 High |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to manipulate the lifetimes of synchronisation objects in the kernel, leading to read/write UAFs. During workload submission involving a fence exported by the GPU driver, the reference count of the underlying synchronisation primitive is not properly incremented. This can be exploited, by destroying the exported fence and prematurely release the underlying primitive, resulting in a potential use-after-free condition. | ||||
| CVE-2026-49745 | 3 Google, Imaginationtech, Linux | 4 Android, Ddk, Graphics Ddk and 1 more | 2026-08-12 | 7.8 High |
| Kernel software installed and running inside a Guest VM may post improper commands to the GPU Firmware to trigger a write of data outside the Guest's virtualised GPU memory. Software installed and run under a Guest VM can send commands to the GPU which result in out of bounds memory accesses. These can be used to escalate privileges. | ||||
| CVE-2026-49744 | 3 Google, Imaginationtech, Linux | 4 Android, Ddk, Graphics Ddk and 1 more | 2026-08-12 | 7.8 High |
| Kernel software installed and running inside a Guest VM may post improper commands to the GPU Firmware to trigger a write of data outside the Guest's virtualised GPU memory. Out of bounds accesses triggered by malware introduced to a Guest KMD could allow privilege escalation which escapes virtualization boundaries. | ||||
| CVE-2026-16280 | 3 Google, Imaginationtech, Linux | 4 Android, Ddk, Graphics Ddk and 1 more | 2026-08-12 | 9.8 Critical |
| An integer overflow when calculating physical offsets for sparse PMRs may result in 32-bit truncation of address computations for PMRs larger than 4 GB. This can lead to incorrect GPU MMU mappings and may allow a non-privileged user to trigger access to unintended physical memory, resulting in memory corruption or information disclosure. | ||||
| CVE-2026-68312 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths In cifs_close_deferred_file(), cifs_close_all_deferred_files(), and cifs_close_deferred_file_under_dentry(), when a pending deferred close is cancelled via cancel_delayed_work(), the subsequent kmalloc_obj() to add the file to the local processing list may fail under memory pressure. The loop breaks immediately, but the cancelled work is no longer pending (it would have called _cifsFileInfo_put()), and the cfile is never added to file_head for processing. The cifsFileInfo reference and the open server handle both leak. Fix by saving the cfile that failed allocation in a local variable, breaking as before, and calling _cifsFileInfo_put() on it after releasing the lock. Any files later in the iteration are unaffected since their deferred work is still pending and will fire normally. | ||||