Export limit exceeded: 380917 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (48421 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-14474 | 1 Redhat | 9 Enterprise Linux, Enterprise Linux Eus, Openshift and 6 more | 2026-08-19 | 8.8 High |
| A flaw was found in SSSD's LDAP sudo provider. When the ldap_sudo_search_base option is not explicitly configured, SSSD searches the entire LDAP directory tree for sudoRole objects. An authenticated attacker with write access to any subtree can inject a sudoRole object granting root-level sudo privileges on all SSSD-enrolled hosts. | ||||
| CVE-2026-20488 | 2 Mediatek, Mediatek, Inc. | 35 Mt6991, Mt6991 Firmware, Mt6993 and 32 more | 2026-08-19 | 4.4 Medium |
| In display, there is a possible information disclosure due to a missing bounds check. This could lead to local information disclosure if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11004276; Issue ID: MSV-7757. | ||||
| CVE-2026-20489 | 2 Mediatek, Mediatek, Inc. | 35 Mt6991, Mt6991 Firmware, Mt6993 and 32 more | 2026-08-19 | 4.4 Medium |
| In display, there is a possible information disclosure due to an integer overflow. This could lead to local information disclosure if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11004274; Issue ID: MSV-7749. | ||||
| CVE-2026-17212 | 1 Ibm | 1 I | 2026-08-19 | 5.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an out-of-bounds read. | ||||
| CVE-2026-74579 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: fix mask build for partial field offload nft_payload_offload_mask() builds the offload match mask for a payload expression that covers only part of a header field. For a partial IPv6 address match (field_len = 16, priv_len = 1) that shift is 1 << 120, which is undefined on the 32-bit int operand. It also trims only one word, so the remaining words stay 0xffffffff (and when priv_len is a multiple of 4 the trim is skipped entirely), leaving the mask covering more bytes than the rule matches. UBSAN: shift-out-of-bounds in net/netfilter/nft_payload.c:278:20 shift exponent 120 is too large for 32-bit type 'int' ... The match is byte-granular and struct nft_data is zero-initialised, so the correct mask is simply the first priv_len bytes set to 0xff. Set those bytes directly and drop the word/shift trimming; this removes the undefined shift and no longer over-masks the trailing bytes. | ||||
| CVE-2026-17216 | 1 Ibm | 1 I | 2026-08-19 | 5.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an integer error when processing DRDA large-object headers. | ||||
| CVE-2026-74567 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: keys: fix out-of-bounds read in keyring_get_key_chunk() For description-level chunks keyring_get_key_chunk() advances the read pointer by level * sizeof(long) past the inline prefix but only bounds-checks the prefix, so a long enough key description is read past its kmemdup(desc, desc_len + 1) allocation. Compute the full byte offset and bounds-check the description against it before reading. The walk only reaches a description-level chunk when two keys collide through the hash, x, type and domain_tag chunks, so this is reached from an unprivileged add_key(2) with a crafted pair of same-type keys whose index hashes collide; KASAN reports a slab-out-of-bounds read. | ||||
| CVE-2026-17226 | 1 Ibm | 1 I | 2026-08-19 | 5.4 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information or cause a denial of service due to an out-of-bounds read. | ||||
| CVE-2026-74553 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Fix number of temperature registers for NCT6116 Unlike NCT6106, NCT6116 only has three temperature registers, and with it only three temperature source and temperature source configuration registers. The register addresses match those of NCT6106 and can be re-used. The code used a separate array to list the temperature source registers for NCT6116, but used the size of the NCT6106 register array to set the number of registers. The NCT6106 register array provides six addresses, while the temperature source register array for NCT6116 only provides three addresses. This causes a KASAN report. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775] Read of size 2 at addr ffffffffc19561a6 by task modprobe/954 ... Call Trace: dump_stack+0x7d/0xa7 print_address_description.constprop.0+0x1c/0x220 ? __kasan_kmalloc.constprop.0+0xc9/0xd0 ? __kmalloc_node_track_caller+0x194/0x5b0 ? nct6775_probe+0x936/0x46f0 [nct6775] ? nct6775_probe+0x936/0x46f0 [nct6775] ... Fix the problem by hard-coding the number of temperature and temperature configuration registers to three for NCT6116. Drop the unnecessary NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE. | ||||
| CVE-2026-74549 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Prevent access to unsupported weight registers Sashiko reports: During initialization of the nct6116 chip, the driver sets data->pwm_num to 5. However, it assigns several NCT6106 register arrays (such as NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP. These arrays only contain 3 elements. In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If data->has_pwm has bits 3 or 4 set (which is structurally possible for nct6116), the loop attempts to read elements at index 3 and 4 from these 3-element arrays. This results in a global out-of-bounds read, which can be caught by KASAN. Furthermore, the driver uses these garbage out-of-bounds values as hardware register addresses for subsequent read and write operations. This leads to invalid hardware register access, potentially causing hardware misconfiguration or system crashes. The underlying problem is that the chip does support up to five fan control channels, but only the first three support weight control. Fix the problem by extending the affected weight register arrays with zeroed fields. The driver uses zeroed register addresses to determine if a register is supported or not, and skips accesses for unsupported registers. | ||||
| CVE-2026-74519 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: devicetree: don't free uninitialized dev_name on error path dt_remember_or_free_map() duplicates dev_name for each map entry. If kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps entries, including entries that have not been initialized. Some pinctrl drivers, including pinctrl-imx, allocate the map with kmalloc() and leave dev_name for the core to initialize. The untouched entries therefore contain uninitialized data which is passed to kfree_const(). Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection while binding the pinctrl-consuming device, under KASAN: BUG: KASAN: double-free in dt_free_map+0x34/0xa4 Free of addr c425a900 by task init/1 kfree from dt_free_map+0x34/0xa4 dt_free_map from dt_remember_or_free_map+0x184/0x198 dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8 pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0 Initialize all dev_name fields to NULL before duplicating the device name, making the full-map cleanup safe after a partial failure. | ||||
| CVE-2026-74964 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-08-19 | 9.8 Critical |
| Integer overflow in the Graphics component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. | ||||
| CVE-2026-74508 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: reject frames without a transaction header hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0] before checking that the L2CAP SDU contains a transaction header. A connected HIDP peer can send an empty basic-mode SDU and make both paths use an uninitialized byte from skb tailroom. KMSAN reports the use in hidp_session_run(), with the uninitialized value originating in __alloc_skb() through vhci_write(). The control path produces two reports and the interrupt path produces one. The byte can also be controlled by a malformed lower-layer packet. If an HCI ACL packet contains an L2CAP PDU with a declared zero-length payload followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to the declared PDU length before dispatch. The current HIDP path nevertheless consumes the extra byte as HIDP_TRANS_HID_CONTROL | HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this change, the same packet is discarded and a subsequent feature report request succeeds. Pull the transaction header with skb_pull_data() and discard frames that do not contain it. | ||||
| CVE-2026-74962 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-08-19 | 8.1 High |
| Site isolation issue in the Networking: Cookies component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. | ||||
| CVE-2026-74507 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: validate numbered report payloads When hidp_get_raw_report() waits for a numbered report, hidp_process_data() compares the expected report number with skb->data[0]. A connected HIDP peer can reply with only a DATA transaction header, leaving the skb empty after the header is removed. KMSAN reports an uninitialized-value use in hidp_session_run(), with the value originating in __alloc_skb() through vhci_write(). The transaction header checks remove the empty-frame reports, but this report remains until the payload check is added. The comparison can also consume a peer-controlled byte beyond the declared L2CAP PDU. A DATA | FEATURE response followed by an extra 0x01 byte made the current code accept that byte as report ID 1 and complete HIDIOCGFEATURE with a zero-byte result. With this change the malformed response is rejected with -EIO, while a subsequent valid response still succeeds. Require a payload byte before comparing a numbered report ID. Unnumbered reports continue to accept an empty payload. | ||||
| CVE-2026-74457 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). | ||||
| CVE-2026-74456 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc() and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also frees the transfer buffer. If usb_submit_urb() fails, the error path frees the buffer explicitly with kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set, usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double free of the transfer buffer. BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0 Free of addr ffff8881069ccb80 by task trigger.sh/285 Call Trace: kfree+0x113/0x3c0 usb_free_urb.part.0+0x91/0xb0 Drop the redundant kfree(buf); usb_free_urb() already releases the transfer buffer. This mirrors commit 03819abbeb11 ("net: usb: lan78xx: Fix double free issue with interrupt buffer allocation"). | ||||
| CVE-2026-74454 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB binner BO, but writes the size of the whole BO to BPOS. On every binner out-of-memory event the PTB is therefore authorized to write tile lists across all the other slots (which may hold the tile state, tile alloc and overflow memory of in-flight jobs) and, for any slot but the first, past the end of the binner BO into unrelated CMA memory. Since CMA pages are recycled into page cache and user allocations, this is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU hangs with corrupted control list pointers, userspace heap corruption, a GPU that stays permanently wedged after the first hang, and occasional full system crashes, whenever a job overflows the initial binner slot. The bug dates back to the conversion from a dedicated overflow BO (where writing the full BO size was correct) to the slotted binner BO. | ||||
| CVE-2026-74444 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject undersized headers up front. | ||||
| CVE-2026-72237 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/brs: Fix kernel address leakage A user-only branch stack can contain branches that originate from the kernel. As a result, kernel addresses are exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors supporting X86_FEATURE_BRS (Zen 3 only), perf can still report entries such as SYSRET/interrupt returns for which the branch-from addresses are in the kernel. E.g. $ perf record -j any,u -c 4000 -e branch-brs -o - -- \ perf bench syscall basic --loop 1000 | \ perf script -i - -F brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' ... 0xffffffff810001c4/0x72e2e32955eb/-/-/-/0//- 0xffffffff810001c4/0x72e2d94a9821/-/-/-/0//- 0xffffffff810001c4/0x72e2d94ffa1b/-/-/-/0//- ... BRS provides no hardware branch filtering, so privilege level filtering is performed entirely in software. However, amd_brs_match_plm() only validates the branch-to address against the requested privilege levels. For branches from the kernel to user space, the branch-from address is left unchecked and is leaked. Extend the software filter to also validate the branch-from address, so that any branch record whose branch-from address is in the kernel is dropped when PERF_SAMPLE_BRANCH_USER is requested. | ||||