| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1, Atom exhaustion: OAuth2 JWT tag: scope values. extractscopes/1 parses scopes of the form .tag: and calls rabbitdatacoercion:toatom() to convert to a tag atom. The token signature is verified first, so the attacker cannot forge scopes , but in IdP configurations where scope content is user-influenced, each login with a novel tag value leaks one In deployments where users can influence the scopes included in their IdP-issued JWT rabbitmqauthbackendoauth2 enabled IdP permits attacker-influenced scope values in signed tokens. This issue is fixed in versions 3.13.15 and 4.0.22 and 4.1.11 and 4.2.6 and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. From 4.1.0 until 4.3.3, 4.2.9, and 4.1.11, Stream Management Super-Stream Binding Keys Allocation Allows Low-Privilege Node Denial of Service. rabbitMQ 4.3.1 with rabbitmqstreammanagement enabled accepts PUT /api/stream/super-streams/{vhost}/{name} requests from an authenticated management user that can access the target vhost. When the request body contains the binding-keys field, the handler parses the attacker-controlled comma-separated string and builds the full stream-name list before checking whether the user has permission to configure the resulting streams. A low-privileged management user with vhost access but no configure, write, or read permission can therefore force large transient allocations before the resource permission check. In a 768 MB memory-limited container, one HTTP PUT with about 4.5 MB of JSON body killed the RabbitMQ container with Docker state exited true An authenticated low-privileged management user can kill a memory-limited RabbitMQ node with one HTTP This issue is fixed in versions 4.3.3, 4.2.9, and 4.1.11. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, mechanisms/1 applied list_to_atom/1 to every colon-delimited token in an attacker-controlled auth_mechanism value, permanently consuming Erlang VM atoms and allowing the node to be crashed with a large request. Exploitation requires the Shovel or Federation plugin to be in use, and setting auth_mechanism requires the policymaker tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| A vulnerability exists in the underlying operating system of HPE Networking EdgeConnect SD-WAN Gateways. Successful exploitation could allow an unauthenticated remote attacker to conduct a denial-of-service attack on the affected service. |
| Vulnerabilities in HPE Networking EdgeConnect SD-WAN Gateways could allow an unauthenticated remote attacker to cause a denial-of-service. Successful exploitation could allow an attacker to interrupt the normal operation of the affected service. |
| A vulnerability in the operating system of HPE Networking EdgeConnect SD-WAN Gateways could allow an authenticated local attacker to cause a denial-of-service. Successful exploitation could allow an attacker to disrupt system operations, potentially resulting in an unstable system state. |
| Vulnerabilities in HPE Networking EdgeConnect SD-WAN Gateways could allow an unauthenticated adjacent attacker to conduct denial-of-service attacks. Successful exploitation could allow an attacker to crash the system, preventing it from rebooting without manual intervention and disrupting network operations. |
| A vulnerability in HPE Networking EdgeConnect SD-WAN Gateways could allow an unauthenticated adjacent attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to crash the system, preventing it from rebooting without manual intervention and disrupting network operations. |
| A vulnerability in HPE Networking EdgeConnect SD-WAN Gateways could allow an unauthenticated remote attacker to cause a denial-of-service against certain services running on impacted Gateways. |
| A security flaw has been discovered in Trusted Domain Project OpenARC up to 1.0.0.Beta1. Impacted is the function arc_parse_canon_t in the library libopenarc/arc-canon.c of the component libopenarc. The manipulation results in null pointer dereference. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 1.0.0.Beta0 is recommended to address this issue. Upgrading the affected component is advised. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845
On NPCM845, when a target on the I3C bus gets stuck holding SDA low,
the controller reports a false Master Request (MR) in-band interrupt
event. The driver handles this by emitting a STOP condition to restore
the bus.
However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that
emitting a STOP condition may spuriously set the SLVSTART interrupt
status bit. In the Master Request case, this creates a feedback loop:
the STOP triggers a new SLVSTART event, the IRQ handler fires again,
the controller still reports an MR type, another STOP is emitted, and
the cycle repeats indefinitely, resulting in an IRQ storm that can lock
up the CPU.
Clear the SLVSTART status bit explicitly after emitting the STOP in the
Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk
is set. This breaks the feedback loop without affecting normal SLVSTART
processing, which is already guarded in the top-level IRQ handler by
checking that MSTATUS is in SLVREQ state. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions prior to 3.2.10, 3.3.12, and 3.4.13 contain an infinite-loop vulnerability in SampleCountChannel. The helper roundListSizeUp() rounds a sample-list size up to the next power of two using repeated unsigned left shifts, which terminates for normal values but fails for UINT_MAX: the sequence reaches 0x80000000, and the next left shift wraps the 32-bit value to 0. Because 0 remains less than UINT_MAX, the loop never progresses and never exits. The bug is reachable through public OpenEXRUtil APIs, either by editing the sample-count buffer through SampleCountChannel::Edit (whose destructor calls endEdit()) or by calling SampleCountChannel::set(x, y, UINT_MAX) on a valid pixel. This issue has been fixed in versions 3.2.10, 3.3.12, and 3.4.13. |
| The divi-dash WordPress plugin before 1.0.7 does not validate the source of the client IP address it uses for rate limiting and banning, allowing unauthenticated attackers to spoof arbitrary IP addresses in order to bypass rate limiting, ban chosen addresses from the feature, and grow a stored option without bound, resulting in denial of service. |
| Mini-XML 4.0.5 contains a memory leak vulnerability in mxml_load_data() during malformed XML parsing. Specially crafted XML input can cause text nodes allocated by mxmlNewText() to become unlinked before a parse error transfers control to the cleanup path. These orphaned nodes are not released, resulting in a persistent memory leak on each parsing attempt. Repeated attacker-controlled requests can cause cumulative memory exhaustion and denial of service. |
| An issue in EGO-Planner-v2 All versions up to commit 5c99a95880401e2599638d567abc0e240396cb42 allows an attacker to cause a denial of service via the checkCollisionCallback, execFSMCallback, planFromGlobalTraj in ego_replan_fsm.cpp |
| An issue in ZJU-FAST-Lab EGO-Planner-v2 All versions up to commit 5c99a95880401e2599638d567abc0e240396cb42 allows an attacker to cause a denial of service via the EGOReplanFSM component |
| http4k is a functional toolkit for Kotlin HTTP applications. Prior to 4.51.0.0, 5.42.0.0, and 6.49.0.0, ServerFilters.GZip, RequestFilters.GunZip, and the underlying Gzip request-body decompression functions impose no limit on decompressed size. An unauthenticated client can send a small gzip-encoded request body that expands to gigabytes, exhausting the JVM heap and denying service to other clients. The fix uses SizeLimitedInputStream to enforce a default 10 MiB limit, causes ServerFilters.GZip and RequestFilters.GunZip to return 413 Request Entity Too Large, and causes other decompression paths to throw SizeLimitExceededException. This issue is fixed in versions 4.51.0.0, 5.42.0.0, and 6.49.0.0. |
| Vulnerability in the Oracle Net Services component of Oracle Database Server. Supported versions that are affected are 19.3-19.32, 21.3-21.23 and 23.4.0-23.26.3. Easily exploitable vulnerability allows unauthenticated attacker with network access via Oracle Net to compromise Oracle Net Services. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Net Services. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead denial of service via Excessive Allocation (CAPEC-130) |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain a denial-of-service vulnerability in the QPACK prefixed-integer decoder (QpackUtil.decodePrefixedInteger), which does not bound the number of continuation bytes it will process. A remote, unauthenticated peer can open a QPACK unidirectional stream (type 0x02 encoder or 0x03 decoder) and send a first byte with all prefix bits set (e.g. 0xFF for a 7-bit prefix or 0x3F for a 5-bit prefix) followed by an endless run of 0x80 continuation bytes. The decoder returns -1 ('need more bytes'), so callers never consume the input, the ByteToMessageDecoder cumulator grows without bound, and each decode() invocation re-scans the whole accumulated buffer, yielding O(N^2) CPU cost. The result is unbounded per-connection heap growth (OutOfMemoryError) and event-loop CPU starvation, reachable in every configuration. Fixed in 4.2.18.Final. |
