| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
kdb: Fix buffer overflow during tab-complete
Currently, when the user attempts symbol completion with the Tab key, kdb
will use strncpy() to insert the completed symbol into the command buffer.
Unfortunately it passes the size of the source buffer rather than the
destination to strncpy() with predictably horrible results. Most obviously
if the command buffer is already full but cp, the cursor position, is in
the middle of the buffer, then we will write past the end of the supplied
buffer.
Fix this by replacing the dubious strncpy() calls with memmove()/memcpy()
calls plus explicit boundary checks to make sure we have enough space
before we start moving characters around. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix log recovery buffer allocation for the legacy h_size fixup
Commit a70f9fe52daa ("xfs: detect and handle invalid iclog size set by
mkfs") added a fixup for incorrect h_size values used for the initial
umount record in old xfsprogs versions. Later commit 0c771b99d6c9
("xfs: clean up calculation of LR header blocks") cleaned up the log
reover buffer calculation, but stoped using the fixed up h_size value
to size the log recovery buffer, which can lead to an out of bounds
access when the incorrect h_size does not come from the old mkfs
tool, but a fuzzer.
Fix this by open coding xlog_logrec_hblks and taking the fixed h_size
into account for this calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: add error handle to avoid out-of-bounds
if the sdma_v4_0_irq_id_to_seq return -EINVAL, the process should
be stop to avoid out-of-bounds read, so directly return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()
syzbot reports a kernel bug as below:
F2FS-fs (loop0): Mounted with checkpoint version = 48b305e4
==================================================================
BUG: KASAN: slab-out-of-bounds in f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline]
BUG: KASAN: slab-out-of-bounds in current_nat_addr fs/f2fs/node.h:213 [inline]
BUG: KASAN: slab-out-of-bounds in f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600
Read of size 1 at addr ffff88807a58c76c by task syz-executor280/5076
CPU: 1 PID: 5076 Comm: syz-executor280 Not tainted 6.9.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline]
current_nat_addr fs/f2fs/node.h:213 [inline]
f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600
f2fs_xattr_fiemap fs/f2fs/data.c:1848 [inline]
f2fs_fiemap+0x55d/0x1ee0 fs/f2fs/data.c:1925
ioctl_fiemap fs/ioctl.c:220 [inline]
do_vfs_ioctl+0x1c07/0x2e50 fs/ioctl.c:838
__do_sys_ioctl fs/ioctl.c:902 [inline]
__se_sys_ioctl+0x81/0x170 fs/ioctl.c:890
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is we missed to do sanity check on i_xattr_nid during
f2fs_iget(), so that in fiemap() path, current_nat_addr() will access
nat_bitmap w/ offset from invalid i_xattr_nid, result in triggering
kasan bug report, fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
enic: Validate length of nl attributes in enic_set_vf_port
enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE
is of length PORT_PROFILE_MAX and that the nl attributes
IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX.
These attributes are validated (in the function do_setlink in rtnetlink.c)
using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE
as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and
IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation
using the policy is for the max size of the attributes and not on exact
size so the length of these attributes might be less than the sizes that
enic_set_vf_port expects. This might cause an out of bands
read access in the memcpys of the data of these
attributes in enic_set_vf_port. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: cadence: fix invalid PDI offset
For some reason, we add an offset to the PDI, presumably to skip the
PDI0 and PDI1 which are reserved for BPT.
This code is however completely wrong and leads to an out-of-bounds
access. We were just lucky so far since we used only a couple of PDIs
and remained within the PDI array bounds.
A Fixes: tag is not provided since there are no known platforms where
the out-of-bounds would be accessed, and the initial code had problems
as well.
A follow-up patch completely removes this useless offset. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Use variable length array instead of fixed size
Should fix smatch warning:
ntfs_set_label() error: __builtin_memcpy() 'uni->name' too small (20 vs 256) |
| In the Linux kernel, the following vulnerability has been resolved:
jffs2: prevent xattr node from overflowing the eraseblock
Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.
Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:
jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead
This breaks the filesystem and can lead to KASAN crashes such as:
BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
speakup: Fix sizeof() vs ARRAY_SIZE() bug
The "buf" pointer is an array of u16 values. This code should be
using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512),
otherwise it can the still got out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow
There is a possibility of buffer overflow in
show_rcu_tasks_trace_gp_kthread() if counters, passed
to sprintf() are huge. Counter numbers, needed for this
are unrealistically high, but buffer overflow is still
possible.
Use snprintf() with buffer size instead of sprintf().
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu: Fix buffer overflow in print_cpu_stall_info()
The rcuc-starvation output from print_cpu_stall_info() might overflow the
buffer if there is a huge difference in jiffies difference. The situation
might seem improbable, but computers sometimes get very confused about
time, which can result in full-sized integers, and, in this case,
buffer overflow.
Also, the unsigned jiffies difference is printed using %ld, which is
normally for signed integers. This is intentional for debugging purposes,
but it is not obvious from the code.
This commit therefore changes sprintf() to snprintf() and adds a
clarifying comment about intention of %ld format.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix out-of-bound access of qmi_invoke_handler()
Currently, there is no terminator entry for ath12k_qmi_msg_handlers hence
facing below KASAN warning,
==================================================================
BUG: KASAN: global-out-of-bounds in qmi_invoke_handler+0xa4/0x148
Read of size 8 at addr ffffffd00a6428d8 by task kworker/u8:2/1273
CPU: 0 PID: 1273 Comm: kworker/u8:2 Not tainted 5.4.213 #0
Workqueue: qmi_msg_handler qmi_data_ready_work
Call trace:
dump_backtrace+0x0/0x20c
show_stack+0x14/0x1c
dump_stack+0xe0/0x138
print_address_description.isra.5+0x30/0x330
__kasan_report+0x16c/0x1bc
kasan_report+0xc/0x14
__asan_load8+0xa8/0xb0
qmi_invoke_handler+0xa4/0x148
qmi_handle_message+0x18c/0x1bc
qmi_data_ready_work+0x4ec/0x528
process_one_work+0x2c0/0x440
worker_thread+0x324/0x4b8
kthread+0x210/0x228
ret_from_fork+0x10/0x18
The address belongs to the variable:
ath12k_mac_mon_status_filter_default+0x4bd8/0xfffffffffffe2300 [ath12k]
[...]
==================================================================
Add a dummy terminator entry at the end to assist the qmi_invoke_handler()
in traversing up to the terminator entry without accessing an
out-of-boundary index.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix potential index out of bounds in color transformation function
Fixes index out of bounds issue in the color transformation function.
The issue could occur when the index 'i' exceeds the number of transfer
function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, an error message is
logged and the function returns false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix seg fault in rxe_comp_queue_pkt
In rxe_comp_queue_pkt() an incoming response packet skb is enqueued to the
resp_pkts queue and then a decision is made whether to run the completer
task inline or schedule it. Finally the skb is dereferenced to bump a 'hw'
performance counter. This is wrong because if the completer task is
already running in a separate thread it may have already processed the skb
and freed it which can cause a seg fault. This has been observed
infrequently in testing at high scale.
This patch fixes this by changing the order of enqueuing the packet until
after the counter is accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana_ib: boundary check before installing cq callbacks
Add a boundary check inside mana_ib_install_cq_cb to prevent index overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
of: module: add buffer overflow check in of_modalias()
In of_modalias(), if the buffer happens to be too small even for the 1st
snprintf() call, the len parameter will become negative and str parameter
(if not NULL initially) will point beyond the buffer's end. Add the buffer
overflow check after the 1st snprintf() call and fix such check after the
strlen() call (accounting for the terminating NUL char). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
l2cap_le_flowctl_init() can cause both div-by-zero and an integer
overflow since hdev->le_mtu may not fall in the valid range.
Move MTU from hci_dev to hci_conn to validate MTU and stop the connection
process earlier if MTU is invalid.
Also, add a missing validation in read_buffer_size() and make it return
an error value if the validation fails.
Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a
kzalloc failure and invalid MTU value.
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci0 hci_rx_work
RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547
Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c
89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d
b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42
RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246
RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f
RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa
R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084
R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000
FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline]
l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline]
l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline]
l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809
l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506
hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline]
hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335
worker_thread+0x926/0xe70 kernel/workqueue.c:3416
kthread+0x2e3/0x380 kernel/kthread.c:388
ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: guard against invalid STA ID on removal
Guard against invalid station IDs in iwl_mvm_mld_rm_sta_id as that would
result in out-of-bounds array accesses. This prevents issues should the
driver get into a bad state during error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check bloom filter map value size
This patch adds a missing check to bloom filter creating, rejecting
values above KMALLOC_MAX_SIZE. This brings the bloom map in line with
many other map types.
The lack of this protection can cause kernel crashes for value sizes
that overflow int's. Such a crash was caught by syzkaller. The next
patch adds more guard-rails at a lower level. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
VMBus code could free decrypted pages if set_memory_encrypted()/decrypted()
fails. Leak the pages if this happens. |
