| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An incomplete fix for ose-olm-catalogd-container was issued for the Rapid Reset Vulnerability (CVE-2023-39325/CVE-2023-44487) where only unauthenticated streams were protected, not streams created by authenticated sources. |
| A vulnerability, which was classified as problematic, was found in H3C R2+ProG up to 200R004. Affected is the function UpdateWanParams/AddMacList/EditMacList/AddWlanMacList/EditWlanMacList/Edit_BasicSSID/Edit_GuestSSIDFor2P4G/Edit_BasicSSID_5G/SetAPInfoById of the file /goform/aspForm of the component HTTP POST Request Handler. The manipulation of the argument param leads to denial of service. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in H3C Magic R200G up to 100R002 and classified as problematic. Affected by this vulnerability is the function Edit_BasicSSID/Edit_BasicSSID_5G/SetAPWifiorLedInfoById/SetMobileAPInfoById/Asp_SetTimingtimeWifiAndLed/AddMacList/EditMacList/AddWlanMacList/EditWlanMacList of the file /goform/aspForm of the component HTTP POST Request Handler. The manipulation of the argument param leads to denial of service. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in TP-Link VN020 F3v(T) TT_V6.2.1021. It has been rated as critical. This issue affects some unknown processing of the file /control/WANIPConnection of the component Incomplete SOAP Request Handler. The manipulation leads to denial of service. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. |
| ** DISPUTED ** A vulnerability classified as problematic has been found in Tuya SDK up to 5.0.x. Affected is an unknown function of the component MQTT Packet Handler. The manipulation leads to denial of service. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. Upgrading to version 5.1.0 is able to address this issue. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-260604. NOTE: The vendor explains that a malicious actor would have to crack TLS first or use a legitimate login to initiate the attack. |
| ws is an open source WebSocket client and server for Node.js. A request with a number of headers exceeding theserver.maxHeadersCount threshold could be used to crash a ws server. The vulnerability was fixed in ws@8.17.1 (e55e510) and backported to ws@7.5.10 (22c2876), ws@6.2.3 (eeb76d3), and ws@5.2.4 (4abd8f6). In vulnerable versions of ws, the issue can be mitigated in the following ways: 1. Reduce the maximum allowed length of the request headers using the --max-http-header-size=size and/or the maxHeaderSize options so that no more headers than the server.maxHeadersCount limit can be sent. 2. Set server.maxHeadersCount to 0 so that no limit is applied. |
| Minder is an open source Software Supply Chain Security Platform. Minder's Git provider is vulnerable to a denial of service from a maliciously configured GitHub repository. The Git provider clones users repositories using the `github.com/go-git/go-git/v5` library on lines `L55-L89`. The Git provider does the following on the lines `L56-L62`. First, it sets the `CloneOptions`, specifying the url, the depth etc. It then validates the options. It then sets up an in-memory filesystem, to which it clones and Finally, it clones the repository. The `(g *Git) Clone()` method is vulnerable to a DoS attack: A Minder user can instruct Minder to clone a large repository which will exhaust memory and crash the Minder server. The root cause of this vulnerability is a combination of the following conditions: 1. Users can control the Git URL which Minder clones, 2. Minder does not enforce a size limit to the repository, 3. Minder clones the entire repository into memory. This issue has been addressed in commit `7979b43` which has been included in release version v0.0.52. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| The hash table used to manage connections in picoquic before b80fd3f uses a weak hash function, allowing remote attackers to cause a considerable CPU load on the server (a Hash DoS attack) by initiating connections with colliding Source Connection IDs (SCIDs). |
| amphp/http will collect CONTINUATION frames in an unbounded buffer and will not check a limit until it has received the set END_HEADERS flag, resulting in an OOM crash. |
| SoftEtherVPN is a an open-source cross-platform multi-protocol VPN Program. When SoftEtherVPN is deployed with L2TP enabled on a device, it introduces the possibility of the host being used for amplification/reflection traffic generation because it will respond to every packet with two response packets that are larger than the request packet size. These sorts of techniques are used by external actors who generate spoofed source IPs to target a destination on the internet. This vulnerability has been patched in version 5.02.5185.
|
| An issue in Texas Instruments LP-CC2652RB SimpleLink CC13XX CC26XX SDK 7.41.00.17 allows attackers to cause a Denial of Service (DoS) via sending a crafted LL_Pause_Enc_Req packet during the authentication and connection phase, causing a Denial of Service (DoS). |
| A hash collision vulnerability (in the hash table used to manage connections) in LSQUIC (aka LiteSpeed QUIC) before 4.2.0 allows remote attackers to cause a considerable CPU load on the server (a Hash DoS attack) by initiating connections with colliding Source Connection IDs (SCIDs). This is caused by XXH32 usage. |
| An issue in the Bluetooth Low Energy (BLE) stack of Realtek RTL8762E BLE SDK v1.4.0 allows attackers within Bluetooth range to cause a Denial of Service (DoS) via sending a specific sequence of crafted control packets. |
| A bug exists in the API, mesh_node_power_off(), which fails to copy the contents of the Replay Protection
List (RPL) from RAM to NVM before powering down, resulting in the ability to replay unsaved messages. Note that as of June 2024, the Gecko SDK was renamed to the Simplicity SDK, and the versioning scheme
was changed from Gecko SDK vX.Y.Z to Simplicity SDK YYYY.MM.Patch#. |
| ajv (Another JSON Schema Validator) before 8.18.0 is vulnerable to Regular Expression Denial of Service (ReDoS) when the $data option is enabled. The pattern keyword accepts runtime data via JSON Pointer syntax ($data reference), which is passed directly to the JavaScript RegExp() constructor without validation. An attacker can inject a malicious regex pattern (e.g., "^(a|a)*$") combined with crafted input to cause catastrophic backtracking. A 31-character payload causes approximately 44 seconds of CPU blocking, with each additional character doubling execution time. This enables complete denial of service with a single HTTP request against any API using ajv with $data: true for dynamic schema validation. This issue is also fixed in version 6.14.0. |
| The Blackmagic ATEM Mini Pro 2.7 exposes an undocumented Telnet service on TCP port 9993, which accepts unauthenticated plaintext commands for controlling streaming, recording, formatting storage devices, and system reboot. This interface, referred to as the "ATEM Ethernet Protocol 1.0", provides complete device control without requiring credentials or encryption. An attacker on the same network (or with remote access to the exposed port) can exploit this interface to execute arbitrary streaming commands, erase disks, or shut down the device - effectively gaining full remote control. |
| An issue was discovered on certain Nuki Home Solutions devices. It is possible to send multiple BLE malformed packets to block some of the functionality and reboot the device. This affects Nuki Smart Lock 3.0 before 3.3.5 and Nuki Smart Lock 2.0 before 2.12.4. |
| An issue was discovered on certain Nuki Home Solutions devices. By sending a malformed HTTP verb, it is possible to force a reboot of the device. This affects Nuki Bridge v1 before 1.22.0 and v2 before 2.13.2. |
| Django-Select2 is a Django integration for Select2. Prior to version 8.4.1, instances of HeavySelect2Mixin subclasses like the ModelSelect2MultipleWidget and ModelSelect2Widget can leak secret access tokens across requests. This can allow users to access restricted query sets and restricted data. This issue has been patched in version 8.4.1. |
| The Lotus Cars Android app (com.lotus.carsdomestic.intl) 1.2.8 contains an exported component, PushDeepLinkActivity, which is accessible without authentication via ADB or malicious apps. This poses a risk of unintended access to application internals and can cause denial of service or logic abuse. |
