| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| - On-Chip Debug Interface vulnerability in Johnson Controls Neo Series MVP2 allows Collect Data from Common Resource Locations.
This issue affects Neo Series MVP2: before 3.3b63. |
| - On-Chip Debug Interface vulnerability in Johnson Controls EasyIO FS32 allows Collect Data from Common Resource Locations.
This issue affects EasyIO FS32: before 3.3b63. |
| Kasa EC70 v4
and EC71 v4 do not logically disable the production debug interface at the
firmware or chip level and do not lock the bootloader. Although the debug traces are physically
severed during manufacturing, an attacker with physical access can restore the
connection, interrupt the boot process, and manipulate boot parameters to enter
a non-standard initialization path that exposes an unauthenticated root shell
during startup.
Successful exploitation may allow an
attacker with physical access to obtain root-level command access during device
startup, resulting in loss of confidentiality, integrity, and availability for
the affected device. Exploitation requires device disassembly, restoration of
the severed debug connection, and manipulation of the boot process. |
| Dell Boot Optimized Server Storage (BOSS), versions prior to 2.2.13.2038, contains an On-Chip Debug and Test Interface With Improper Access Control vulnerability in the SMCU on 17G BOSS-N1 controllers. An unauthenticated attacker with physical access could potentially exploit this vulnerability, leading to Unauthorized access. |
| Dell Boot Optimized Server Storage (BOSS), versions prior to 2.2.13.2038, contains an On-Chip Debug and Test Interface With Improper Access Control vulnerability in the SMCU on 17G BOSS-N1 controllers. An unauthenticated attacker with physical access could potentially exploit this vulnerability, leading to Unauthorized access. |
| Dell Boot Optimized Server Storage (BOSS), versions prior to 2.2.13.2038, contains an On-Chip Debug and Test Interface With Improper Access Control vulnerability in the SMCU on 17G BOSS-N1 controllers. An unauthenticated attacker with physical access could potentially exploit this vulnerability, leading to Unauthorized access. |
| Improper access control in debug and engineering interfaces in Danfoss iC7-Automation SP, iC7-Marine, and iC7-Hybrid GR3 allows attackers to gain read/write access to internal values, upload and execute unsigned applications, and upload unsigned EEPROM data and firmware via exposed service interfaces and software update mechanisms |
| Autel Maxi Charger Single firmware through V1.03.51 permits unrestricted access to the NXP i.MX6 recovery mode through exposed hardware recovery pins. An attacker with physical access can boot attacker-controlled code in memory and modify or extract firmware and other sensitive data. |
| Autel Maxi Charger Single firmware through V1.03.51 exposes an accessible UART interface that permits interruption of the boot process and access to the U-Boot bootloader. An attacker with physical access can modify the boot configuration or file system to obtain operating system access. |
| This vulnerability exists in Digisol Router (DG-GR1321: Hardware version 3.7L; Firmware version : v3.2.02) due to presence of root terminal access on a serial interface without proper access control. An attacker with physical access could exploit this by identifying UART pins and accessing the root shell on the vulnerable system.
Successful exploitation of this vulnerability could allow the attacker to access the sensitive information on the targeted system. |
| The JTAG interface of Wattsense Bridge devices can be accessed with physical access to the PCB. After connecting to the interface, full access to the device is possible. This enables an attacker to extract information, modify and debug the device's firmware. All known versions are affected. |
| A serial interface can be accessed with physical access to the PCB of Wattsense Bridge devices. After connecting to the interface, access to the bootloader is possible, as well as a Linux login prompt. The bootloader access can be used to gain a root shell on the device. This issue is fixed in recent firmware versions BSP >= 6.4.1. |
| This vulnerability exists in SyroTech SY-GPON-1110-WDONT Router due to presence of root terminal access on a serial interface without proper access control. An attacker with physical access could exploit this by accessing the root shell on the vulnerable system.
Successful exploitation of this vulnerability could allow the attacker to execute arbitrary commands with root privileges on the targeted system. |
| A vulnerability classified as critical has been found in FNKvision FNK-GU2 up to 40.1.7. Affected is an unknown function of the component UART Interface. The manipulation leads to on-chip debug and test interface with improper access control. It is possible to launch the attack on the physical device. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. |
| Improper Access Control in an on-chip debug interface could allow a privileged attacker to enable a debug interface and potentially compromise data confidentiality or integrity. |
| Debug code left active in AMD's Video Decoder Engine Firmware (VCN FW) could allow a attacker to submit a maliciously crafted command causing the VCN FW to perform read/writes HW registers, potentially impacting confidentiality, integrity and availabilability of the system. |
| On-chip debug and test interface with improper access control in some 4th Generation Intel(R) Xeon(R) Processors when using Intel(R) SGX or Intel(R) TDX may allow a privileged user to potentially enable escalation of privilege via local access. |
| The CleverDisplay BlueOne hardware player is designed with its USB interfaces physically enclosed and inaccessible under normal operating conditions. Researchers demonstrated that, after cicumventing the device’s protective enclosure, it was possible to connect a USB keyboard and press ESC during boot to access the BIOS setup interface. BIOS settings could be viewed but not modified. This behavior slightly increases the attack surface by exposing internal system information (CWE-1244) once the enclosure is removed, but does not allow integrity or availability compromise under standard or tested configurations. |
| On-Chip Debug and Test Interface With Improper Access Control and Improper Protection against Electromagnetic Fault Injection (EM-FI) in Nordic Semiconductor nRF52810 allow attacker to perform EM Fault Injection and bypass APPROTECT at runtime, requiring the least amount of modification to the hardware system possible. |
| The ventilator's microcontroller lacks memory protection. An attacker could connect to the internal JTAG interface and read or write to flash memory using an off-the-shelf debugging tool, which could disrupt the function of the device and/or cause unauthorized information disclosure. |
