| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ZEBRA is a Zcash node written entirely in Rust. Prior to 4.5.0, a malicious unauthenticated P2P peer can answer Zebra's outbound getblocks or FindBlocks request with a small two-hash inventory and then serve a syntactically valid block whose coinbase height is far above the local chain tip. In zebrad/src/components/sync/downloads.rs, BlockDownloadVerifyError::AboveLookaheadHeightLimit originally carried only the block height and hash, so handle_block_response could not attribute the failure to the advertising peer. The error then reached the restart-worthy default path in zebrad/src/components/sync.rs, cancelling all in-flight downloads from honest peers and imposing a 67-second sync restart delay on mainnet. Because the peer was neither scored nor disconnected, the peer could repeat the cycle indefinitely with minimal bandwidth and significantly degrade synchronization without corrupting state. This issue is fixed in version 4.5.0. |
| BetterDesk is a remote desktop management solution. BetterDesk versions through 2.3.0 improperly invalidate deleted device identities, allowing an unauthenticated client to replay or spoof a device ID and bypass registration controls. Version 3.0.0-alpha contains a patch. No known workarounds are available. |
| The Twilio integration webhook handler accepts any POST request without validating Twilio's 'X-Twilio-Signature'.
When processing media messages, it fetches user-controlled URLs ('MediaUrlN' parameters) using HTTP requests that include the integration's Twilio credentials in the 'Authorization' header.
An attacker can forge a webhook payload pointing to their own server and receive the victim's 'accountSID' and 'authToken' in plaintext (base64-encoded Basic Auth), leading to full compromise of the Twilio account. |
| Eclipse Kura versions prior to 5.6.2 trust the client-supplied X-Forwarded-For HTTP header as the authoritative source of the client IP address in audit log entries. The org.eclipse.kura.web2 (Web Console) and org.eclipse.kura.rest.provider (REST API) components use this header as the primary IP source when initializing audit context, and org.eclipse.kura.jetty.customizer unconditionally installs Jetty's ForwardedRequestCustomizer on all HTTP/HTTPS connectors, causing HttpServletRequest.getRemoteAddr() to reflect the attacker-controlled header value. An unauthenticated remote attacker can exploit this vulnerability to bypass IP-based brute-force protections — such as fail2ban — by spoofing the logged IP address to a non-routable value, allowing a brute-force attack to proceed undetected, or to cause a denial of service against a third party by injecting a victim's IP address and triggering a ban on that address. |
| openssl_encrypt versions before 1.4.0 contain an insecure default configuration that trusts the entire RFC 1918 private address space in IntegrityProxyConfig trusted_proxies. Attackers on private networks can forge client certificate headers to bypass mTLS authentication when ProxyAuth validation is relaxed or modified. |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.7, macros loaded from an attacker-controlled shortcuts.xml bypass the HMAC validation applied to UserDefinedCommands and can invoke Scintilla actions and the internal Open in Default Viewer command in an elevated Notepad++ process, allowing protected file modification and conditional elevated command execution when a local attacker influences settingsDir and a user triggers the macro. This issue is fixed in version 8.9.7. |
| CKAN MCP Server is a tool for querying CKAN open data portals. Prior to 0.4.112, canonicalizeParams in src/utils/cache.ts serializes request parameters with unescaped ampersand, equals-sign, and vertical-bar delimiters, allowing different logical parameter sets used by buildCacheKey to collide and an attacker to prime a shared cache with a response for a victim's distinct query. This issue is fixed in version 0.4.112. |
| Trigger.dev is a platform for building and deploying fully managed AI agents and workflows. From 4.4.2 until 4.5.0-rc.4, `POST /api/v1/runs/:runParam/replay` in apps/webapp/app/routes/api.v1.runs.$runParam.replay.ts uses `prisma.taskRun.findUnique({ where: { friendlyId: runParam } })` without a runtimeEnvironmentId filter, then ReplayTaskRunService in apps/webapp/app/v3/services/replayTaskRun.server.ts replays the selected run in the victim environment. Any valid environment API key can therefore replay another tenant's run by friendlyId, consuming victim resources and repeating side effects; when `payloadType: "application/store"` is used, overrideExistingPayloadPacket() calls conditionallyImportPacket() on existingTaskRun.payload without an integrity check, so payload bytes overwritten through a separate object-store path-traversal vulnerability become attacker-controlled input to the victim task. This issue is fixed in version 4.5.0-rc.4. |
| openssl_encrypt versions before 1.4.0 silently skip JSON schema validation when the jsonschema library is not installed, allowing malformed metadata to be accepted. Attackers can remove the jsonschema package or supply unknown metadata format versions to bypass all schema checks and process malicious data. |
| openssl_encrypt versions before 1.4.0 contain an authentication bypass vulnerability in CamelliaCipher that disables HMAC tag generation and verification when the PYTEST_CURRENT_TEST environment variable is set. Attackers with code execution can set this environment variable to produce unauthenticated ciphertext and bypass integrity protection on encrypted data. |
| On a Kong Mesh global control plane, resources received over the zone-to-global KDS sync are attributed using the in-band, sender-controlled ControlPlane.Identifier rather than the authenticated zone identity derived from the connection. Authenticated zones can have the global control plane store and re-distribute those resources as belonging to another zone.
The result is a cross-zone isolation bypass: the holder of a single enrolled zone's credential can inject, attribute, and overwrite resources in another zone's namespace mesh-wide.
The root cause lives in Kuma's open-source KDS sync code, which Kong Mesh's control plane is built on. |
| OpenChoreo is a complete, open-source developer platform for Kubernetes. Prior to 1.0.3, 1.1.3, and 1.2.0-rc.2, the POST /api/v1alpha1/autobuild endpoint in internal/openchoreo-api/api/handlers/webhook_handler.go selected a webhook provider from caller-controlled X-Event-Key, accepted Bitbucket requests without HMAC-SHA256 in X-Hub-Signature or a configured bitbucket-secret, and allowed unauthenticated build triggers for components matched by repository URL and branch, including cross-provider triggers using attacker-supplied commit SHAs. This issue is fixed in versions 1.0.3, 1.1.3, and 1.2.0-rc.2. |
| CyberPanel 2.4.3, fixed in commit eca0c3c, contains an authenticated remote code execution vulnerability in the remote backup feature that allows authenticated attackers to gain root-level SSH access by supplying a malicious remote server address. Attackers can exploit the unverified SSH public key retrieval process to write an attacker-controlled public key directly to /root/.ssh/authorized_keys, granting persistent root access to the host system. |
| go-chi/chi versions 0.9.0 before 5.3.0 contains an IP spoofing vulnerability in the RealIP middleware, which resolves the request source IP (Request.RemoteAddr) using the first IP in the X-Forwarded-For header without validating trusted proxies. A malicious client can prepend a forged IP as the first value of the X-Forwarded-For header to spoof the request source IP, potentially bypassing access controls or falsifying request logs. |
| Unauthenticated Broken Authentication in Log in with Google <= 1.4.2 versions. |
| CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 fails to validate the integrity of the DataStore, a non-partitioned filesystem, responsible for storing configuration and cryptographic details. Crafted DataStore contents can impact service availability and/or allow for code execution in the context of high privilege. |
| An unauthenticated attacker may cause untrusted package content to be cached under specific conditions, potentially affecting artifact integrity and availability. |
| Cleartext storage in PostgreSQL pgcrypto disabled ciphers allows a user to recover cleartext, via direct observation of the faulty ciphertext. The OpenSSL version and OpenSSL configuration determine the disabled ciphers. If the application accepts encrypted data as input, decryption will succeed even with the wrong key. This in turn loses the modest protection from the Modification Detection Code (MDC). Affected functions are pgp_sym_encrypt, pgp_sym_decrypt, pgp_pub_encrypt, pgp_pub_decrypt, pgp_sym_encrypt_bytea, pgp_sym_decrypt_bytea, pgp_pub_encrypt_bytea, and pgp_pub_decrypt_bytea. Versions before PostgreSQL 18.5, 17.11, 16.15, 15.19, and 14.24 are affected. |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, Netty's `DnsResolveContext` insufficiently validates the bailiwick of NS records, enabling DNS Cache Poisoning. An attacker controlling an authoritative name server for a subdomain can poison the cache for parent domains (like `.co.uk`). In `io.netty.resolver.dns.DnsResolveContext.AuthoritativeNameServerList#add` method accepts any NS record from the AUTHORITY section as long as the record's name is a suffix of the questionName. Subsequently, the `handleWithAdditional` method caches the associated A records from the ADDITIONAL section directly into the `authoritativeDnsServerCache` under the parent domain's key. This bypasses standard bailiwick rules, where a server authoritative for a subdomain should not be trusted to provide authoritative records for its parent. The poisoned cache is then used for all future resolutions under the parent domain's key. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, Netty's DnsResolveContext fails to validate the origin (bailiwick) of CNAME records in DNS responses. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
