| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: fix zone comparison in tuple dedup
The "already exists" dedup logic in __nf_conncount_add() decides
whether a connection has already been counted and can be skipped instead
of incrementing the connlimit count. It compares the conntrack zone of a
list entry with the zone of the connection being added using
nf_ct_zone_id() and nf_ct_zone_equal(), passing conn->zone.dir or
zone->dir as the direction argument.
Those helpers take enum ip_conntrack_dir values: IP_CT_DIR_ORIGINAL is 0
and IP_CT_DIR_REPLY is 1. However, zone->dir is a u8 bitmask:
NF_CT_ZONE_DIR_ORIG is 1, NF_CT_ZONE_DIR_REPL is 2 and
NF_CT_DEFAULT_ZONE_DIR is 3. Passing that bitmask as the enum direction
shifts the meaning of every non-zero value. An ORIG-only zone passes 1
and is tested as REPLY, while REPL-only and default zones pass 2 or 3 and
test bits beyond the valid direction range. In those cases
nf_ct_zone_id() can fall back to NF_CT_DEFAULT_ZONE_ID instead of using
the real zone id, so different zones can be treated as equal and dedup
collapses to tuple equality alone.
nf_conncount stores and compares the original-direction tuple for a
connection. If an skb already has an attached conntrack entry,
get_ct_or_tuple_from_skb() explicitly copies
ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, regardless of the packet's
ctinfo. Therefore the zone comparison in the tuple dedup path must use
IP_CT_DIR_ORIGINAL as well; the zone direction bitmask describes where a
zone id applies, not which direction this conncount tuple represents.
Fix the two dedup comparisons by passing IP_CT_DIR_ORIGINAL directly.
Do not special-case NF_CT_DEFAULT_ZONE_DIR and do not compare raw zone
ids: using the existing helpers with IP_CT_DIR_ORIGINAL preserves the
direction-aware NF_CT_DEFAULT_ZONE_ID fallback. A default bidirectional
zone contains the ORIG bit, so it naturally returns the real zone id;
reply-only zones continue to fall back for original-direction tuple
comparisons. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Restore SST-PP control to all domains
The SST-PP control offset is only restored to power domain 0 after
resume. During suspend, control values are read and stored for all
power domains.
Use pd_info->sst_base instead of power_domain_info->sst_base, which
only points to power domain 0 base address. |
| Lemonldap::NG::Portal versions from 2.0.0 before 2.16.9, from 2.17.0 before 2.21.5, from 2.22.0 before 2.23.3 for Perl allow authentication bypass via an OAuth2 state parameter stored as an SSO session in the GitHub and LinkedIn backends.
Before redirecting to the identity provider, extractFormInfo() creates the state session with the positional call `getApacheSession( undef, 1, 0, 'GitHubState' )`. getApacheSession() takes a session id followed by a named argument hash, so the trailing arguments become that hash, `kind` defaults to SSO, and the state is written to the global session storage as a regular SSO session. Its identifier is handed to the unauthenticated visitor as the state parameter of the redirection URL.
Any visitor who reaches the GitHub or LinkedIn endpoint can replay that identifier as a session cookie and obtain a valid SSO session without authenticating. The session holds neither _user nor authenticationLevel, which the shipped bootstrap configuration accepts because it grants virtual hosts a "default => accept" access rule; deployments whose rules test the user or require an authentication level are less exposed. Only configurations with the GitHub or LinkedIn authentication module enabled are affected. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| CKAN MCP Server is a tool for querying CKAN open data portals. Prior to 0.4.112, the ckan_get_mqa_quality and ckan_get_mqa_quality_details tools in src/tools/quality.ts use isValidMqaServer to validate the server_url parameter with a prefix-only regular expression for dati.gov.it, allowing suffix-host and URL-userinfo values to target an attacker-controlled host and return a spoofed response. This issue is fixed in version 0.4.112. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, Netty's DNS codec does not enforce RFC 1035 domain name constraints during either encoding or decoding. This creates a bidirectional attack surface: malicious DNS responses can exploit the decoder, and user-influenced hostnames can exploit the encoder. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final. |
| Semaphore UI is a web interface for managing DevOps tools. Prior to 2.18.21, the /api/users/{id}/password endpoint accepts a cross-site request using the authenticated user's semaphore session cookie without CSRF protection or current-password confirmation, allowing an unauthenticated attacker to change an administrator's or another user's password after user interaction. This issue is fixed in version 2.18.21. |
| Tegalog -Fumy Otegaru Memo Logger- provided by Nishishi Factory contains a vulnerability due to a permissive regular expression, which may allow an attacker who can access the affected product to log in to the management console. As a result, the attacker may perform any operations available from the management console. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Move jump_label_init() before parse_early_param()
When enabling both CONFIG_MEM_ALLOC_PROFILING=y and
CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory
profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will
cause the kernel failed to boot.
After analysis, this is because jump_label_init() must be called before
parse_early_param(), the early param handlers may modify static keys by
static_branch_enable/disable().
Fix this by moving jump_label_init() to before parse_early_param(). The
solution is similar to other architectures. |
| A flaw was found in StackRox/RHACS Central's Auth Machine-to-Machine (M2M) token exchange. When an administrator configures M2M role mappings, the system uses unanchored regular expressions for matching claim values. This allows an attacker with a valid OpenID Connect (OIDC) token, whose claim value is a superstring of a configured pattern, to gain unauthorized access to roles they were not intended to receive. This can lead to privilege escalation within the system. |
| Nexus Repository 3 contained an endpoint used to change the administrator account password during initial onboarding. This endpoint did not verify that onboarding was still in progress before allowing the password change, relying instead on the presence of a local onboarding artifact. As a result, an account holding the nexus:* permission could invoke the endpoint outside the intended onboarding flow to replace the administrator password, and existing sessions were not invalidated after the change. |
| The Single Sign On For TNG plugin for WordPress is vulnerable to Authentication Bypass via unauthenticated password reset in all versions up to, and including, 2.0.0. This is due to the `ssoprocess_ajax()` function — registered on `wp_ajax_nopriv_ssoprocess_ajax` and therefore reachable without authentication — accepting an attacker-supplied `email` parameter with the `setnewpassword` operation and calling `reset_password()` on the resolved account without any ownership token, email confirmation link, or capability check. The sole guard is a call to `check_ajax_referer()`, which provides no authorization barrier because the `ssoajaxnonce` nonce is publicly broadcast on every front-end page via `wp_localize_script()` into the `SSOPWDREQUIREMENT` JavaScript object; since WordPress computes nonces for logged-out visitors against a shared anonymous session context, any unauthenticated visitor can scrape a valid nonce from the homepage and use it to authenticate the request. This makes it possible for unauthenticated attackers to change the password of any WordPress account, including administrator accounts, enabling complete site takeover. |
| A vulnerability has been identified in CPCI85 Central Processing/Communication (All versions < V26.20), SICORE Base system (All versions < V26.20.0). The affected application contains insufficient validation of authentication credentials when processing administrative account modifications through the web API. This could allow an authenticated attacker to bypass security controls and gain unauthorized elevated privileges. |
| Unverified password change vulnerability in Vimesoft Inc. Enterprise Video Platform allows Authentication Bypass.
This issue affects Enterprise Video Platform: from 3.11.0.0 before 3.25.0. |
| A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process. |
| Capgo before 12.128.2 contains an authentication bypass vulnerability in the password change endpoint that allows attackers to change user passwords without requiring current password confirmation. Attackers with temporary session access can exploit this flaw to permanently lock out legitimate users and achieve full account takeover. |
| OpenProject is open-source, web-based project management software. Prior to 17.3.2 and 17.4.0, Business Logic Error on OpenProject through PATCH request to /api/v3/users/me permits to bypass password requirements. A password validation flaw in the change password behavior allows attackers to change a user's password only with an active session takeover. This vulnerability is fixed in 17.3.2 and 17.4.0. |
| Flowise before 3.0.10 contains an unverified password change vulnerability. An authenticated user can change their account password through the account settings (Security) section without supplying the current password or any additional verification, as the application does not enforce a current-password check on the credential change. This can lead to full account takeover, particularly if an attacker can hijack or coerce an authenticated session. |
| CarrierWave is a framework to upload files from Ruby applications. In versions prior to 2.2.7 and 3.1.3, the content_type_denylist check fails to escape regex metacharacters in string entries, causing the denylist to silently not match the content types it is intended to block. In lib/carrierwave/uploader/content_type_denylist.rb:57, denylist entries are interpolated directly into a regex without Regexp.quote or anchoring, so an entry such as image/svg+xml becomes the pattern /image\/svg+xml/, in which + is treated as a quantifier rather than a literal character and therefore never matches the real MIME type image/svg+xml. This is inconsistent with the allowlist implementation, which correctly applies both Regexp.quote and a \A anchor. Other content types containing regex metacharacters, such as application/xhtml+xml, are affected as well. As a result, any application that relies on content_type_denylist to block image/svg+xml, most commonly to prevent stored XSS, is silently unprotected. An attacker can upload an SVG file containing arbitrary JavaScript; if the application serves that SVG inline from its own origin, the script executes in the victim's browser, resulting in stored XSS. This issue has been fixed in versions 2.2.7 and 3.1.3. |
| Flowise before 3.0.10 (affected versions 3.0.7 and earlier) contains an unverified email change vulnerability. An authenticated user can change the account email address, used as a login identifier and password-recovery channel, via the account profile endpoint without confirming the change to the original email address or re-entering the current password. By changing the recovery email, an attacker can take over the account and abuse password reset mechanisms. |
