| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse OpenJ9 versions up to 0.60, when executing class files where a previously concrete superclass method has been recompiled as abstract, execution is incorrectly delegated to an interface default method. |
| RustCrypto CMOV provides conditional move CPU intrinsics which are guaranteed on major platforms to execute in constant-time and not be rewritten as branches by the compiler. From 0.1.1 until 0.5.4, the aarch64 implementations of Cmov and CmovEq in cmov/src/backends/aarch64.rs assume high bits are zero-extended when loading values smaller than a register, so set high bits such as [8..] in a Cmov selector or [16..] of self or other in the u16 and i16 CmovEq implementations can cause left.cmovz(&right, condition) to produce incorrect output. This issue is fixed in version 0.5.4. |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: use sk_msg_free_partial to fix partial send
sk_msg_free_partial() ensures consistency of the skmsg at every
iteration, without having to manually handle uncharges and offsets.
This simplifies the code, and fixes some bugs in skmsg accounting when
we don't send the full contents. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: preserve tc_skb_cb across defragmentation
tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving
and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases
the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through
act_ct therefore loses qdisc metadata such as pkt_segs and can trigger
WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled.
Save and restore the full tc_skb_cb around nf_ct_handle_fragments(),
matching the pattern used by ovs_ct_handle_fragments(). |
| Net::OAuth::Client versions before 0.32 for Perl allow the service provider to silently downgrade OAuth 1.0a to OAuth 1.0 in get_request_token.
Passing a callback to the constructor selects OAuth 1.0a. get_request_token then revokes that choice when the request token response omits oauth_callback_confirmed, with no exception, no warning and no option to require 1.0a. The access token request is built from the OAuth 1.0 message class, which has no verifier parameter, so oauth_verifier is dropped from the request even when get_access_token was passed one.
oauth_verifier is the binding that OAuth 1.0a added between the authorization step and the token exchange. An application that asked for 1.0a and gets 1.0 is open to OAuth 1.0 session fixation, where an attacker obtains a request token, has the victim authorize it, and then completes the exchange themselves, linking the victim's provider account to a session the attacker controls. No attacker action sets up the downgrade: a provider that does not confirm the callback is enough. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload
There is a TOCTOU race condition in flower lockless approach between sizing
a flow_rule buffer and filling it.
zdi-disclosures@trendmicro.com reports:
The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED
(fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the
independent locking domains make the race reachable in practice. KASAN
confirms:
BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930
Write of size 4 at addr ffff888001f27520 by task poc-toctou/312
The buggy address is located 0 bytes to the right of
allocated 288-byte region [ffff888001f27400, ffff888001f27520)
(cache kmalloc-512)
Note: The result is a heap OOB write attacker-controlled content into the
adjacent slab object (requires CAP_NET_ADMIN).
The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places
using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys().
Additionally we close the remaining TOCTOU window between the sizing read and
the fill reads by more careful accounting.
Rather than silently truncating the key count, which leads to incorrect
action semantics offloaded to hardware and secondary OOB writes if
the remaining capacity is zero or consumed by prior actions, we enforce
remaining capacity checks and return -ENOSPC if the required space exceeds
the remaining capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fib_rules: Don't dump dying fib_rule in fib_rules_dump().
rocker_router_fib_event() calls fib_rule_get() during RCU dump.
If the fib_rule is dying, refcount_inc() will complain about it.
Let's call refcount_inc_not_zero() in fib_rules_dump(). |
| Multiple flaws have been identified in `named` related to the handling of DNS messages whose CLASS is not Internet (`IN`) — for example, `CHAOS` or `HESIOD`, or DNS messages that specify meta-classes (`ANY` or `NONE`) in the question section. Specially crafted requests reaching the affected code paths — recursion, dynamic updates (`UPDATE`), zone change notifications (`NOTIFY`), or processing of `IN`-specific record types in non-`IN` data — can cause assertion failures in `named`.
This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1. |
| Permission control vulnerability in the Wi-Fi enhancement module. Impact: Successful exploitation of this vulnerability may affect availability. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: refuse O_TMPFILE creation with an unmapped fsuid or fsgid
vfs_tmpfile() never checked that the caller's fsuid and fsgid map into
the filesystem. On an idmapped mount whose idmapping does not cover the
caller's fs{u,g}id, the ->tmpfile() instance initializes the new inode
through inode_init_owner(), where mapped_fsuid()/mapped_fsgid() return
INVALID_UID/INVALID_GID, and the tmpfile ends up owned by (uid_t)-1.
Every other creation path already refuses this: may_o_create() (O_CREAT)
and may_create_dentry() (mkdir, mknod, symlink, link) bail out with
-EOVERFLOW via fsuidgid_has_mapping() precisely so that an object cannot
be created with an owner the filesystem cannot represent. An O_TMPFILE
is no exception: it is created I_LINKABLE and linkat(2) can splice it
into the namespace afterwards, so the same guarantee must hold.
Add the missing fsuidgid_has_mapping() check to vfs_tmpfile(). On a
non-idmapped mount the caller's fs{u,g}id always map in the superblock's
user namespace, so this is a no-op there and only takes effect on an
idmapped mount that does not map the caller. It applies to every
filesystem that sets FS_ALLOW_IDMAP and implements ->tmpfile() (tmpfs,
ext4, btrfs, xfs, f2fs, ...), and to overlayfs, whose upper-layer
tmpfile creation funnels through vfs_tmpfile() via backing_tmpfile_open(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mpls: initialize rtm_tos in mpls_getroute()
mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE
request by filling a struct rtmsg allocated from an skb whose data
area is not zeroed (alloc_skb(NLMSG_GOODSIZE, ...)). It sets every
field of the header except rtm_tos:
r = nlmsg_data(nlh);
r->rtm_family = AF_MPLS;
r->rtm_dst_len = 20;
r->rtm_src_len = 0;
r->rtm_table = RT_TABLE_MAIN;
r->rtm_type = RTN_UNICAST;
r->rtm_scope = RT_SCOPE_UNIVERSE;
r->rtm_protocol = rt->rt_protocol;
r->rtm_flags = 0;
struct rtmsg has no padding, so the one uninitialised byte rtm_tos
(offset 3) is copied straight to user space on recvmsg(), leaking a
byte of uninitialised heap memory. This is in contrast to
mpls_dump_route(), which fills the very same header and does set
rtm_tos = 0.
Initialize rtm_tos to 0, matching mpls_dump_route().
Reproduced with KMSAN by adding an MPLS route and issuing a
non-RTM_F_FIB_MATCH RTM_GETROUTE for its label:
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0
_copy_to_iter+0x36c/0x33f0
__skb_datagram_iter+0x196/0x12c0
skb_copy_datagram_iter+0x5b/0x210
netlink_recvmsg+0x37b/0xef0
...
Uninit was created at:
__alloc_skb+0x8ca/0x10e0
mpls_getroute+0x1280/0x3a40
rtnetlink_rcv_msg+0x1138/0x15a0
...
Byte 19 of 64 is uninitialized
(byte 19 = nlmsghdr(16) + rtmsg offset 3 = rtm_tos) |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes: Fix NULL pointer dereference in hprobe_expire()
Forking a task that has a pending uretprobe can oops the kernel with a
NULL pointer dereference in the clone() path:
BUG: kernel NULL pointer dereference, address: 0000000000000018
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:hprobe_expire
CR2: 0000000000000018
Call Trace:
uprobe_copy_process
copy_process
kernel_clone
__x64_sys_clone
do_syscall_64
entry_SYSCALL_64_after_hwframe
This was found on real hosts on Meta fleet.
I've got the impression that this is what is happening:
CPU 1 CPU 2 (traced task)
----- -------------------
hit uprobe, prepare_uretprobe():
hprobe LEASED, refcount >= 1
uprobe_unregister()
put_uprobe(): refcount -> 0
fork() -> dup_utask()
hprobe_expire(hprobe, true)
try_get_uprobe() -> NULL
get_uprobe(NULL) <-- Oops
Only take the extra reference when the uprobe is non-NULL; a NULL means
it is gone and is the correct value to return. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_bpf: prevent unbounded recursion in offload rollback
Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd().
Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the
bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace
calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then
swaps prog/oldprog and recursively calls itself to roll back. But
bpf_tc_accept=0 makes the rollback fail too, which triggers yet another
rollback frame with the same arguments, and so on until the stack is
exhausted.
bpf_tc_accept is just a convenient knob for the reproducer. Any driver
whose tc_setup_cb_replace() fails twice in a row can hit the same loop,
so this is not a netdevsim-only issue.
Two ways to fix it:
1) Have the rollback call tc_setup_cb_add() on oldprog instead of
re-entering cls_bpf_offload_cmd().
2) Mark the rollback frame with a flag and skip a second-level
rollback from inside it.
Go with (2). It is the smaller change and keeps the original behaviour:
the rollback still goes through tc_setup_cb_replace(), so the driver
gets one real chance to restore its state. If that attempt also fails,
we just return the original error instead of recursing.
[1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix deadlock waiting for ticket during data relocation
When performing data relocation on a zoned filesystem, BTRFS can deadlock
in handle_reserve_tickets(). The relocation process is waiting on a space
reservation ticket that can never be fulfilled, because the relocation
itself is the operation responsible for freeing up that space.
Fix this by introducing a new flush state,
BTRFS_RESERVE_FLUSH_ZONED_RELOCATION, specifically for data chunk
allocation during zoned relocation. Like
BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE, this state uses
priority_reclaim_data_space() instead of the normal flushing path, which
avoids re-entering the relocation code and breaking the deadlock cycle.
In btrfs_alloc_data_chunk_ondemand(), select this new flush state when the
inode belongs to a data relocation root on a zoned filesystem. |
| Russh is a Rust SSH client & server library. Prior to 0.62.4, a malicious SSH server can crash a russh client session with a malformed KEX_ECDH_REPLY containing a server ephemeral value that is not 32 bytes long. The client-side Curve25519Kex::compute_shared_secret function in russh/src/kex/curve25519.rs passes the decoded exchange.server_ephemeral value to clone_from_slice without validating its length, causing a deterministic panic before the server host key is verified. The panic terminates the spawned client session task and surfaces as a JoinError, while the embedding process normally remains running. This issue is fixed in version 0.62.4. |
| Russh is a Rust SSH client & server library. Prior to 0.62.4, an unauthenticated SSH client can cause a denial of service by sending SSH_MSG_KEX_ECDH_INIT with a 32-byte all-zero Q_C value. Curve25519Kex::server_dh in russh/src/kex/curve25519.rs accepts the all-zero peer public value and computes an all-zero shared secret, after which compute_exchange_hash calls encode_mpint in russh/src/kex/mod.rs and indexes beyond the end of the input while skipping leading zero bytes. The resulting panic occurs before authentication and terminates the server key-exchange task. This issue is fixed in version 0.62.4. |
| baseline-browser-mapping 2.x before 2.11.0 calls process.exit() instead of throwing on invalid or conflicting input parameters, and can trigger immediate process termination, causing denial of service. |
| @fastify/busboy is a multipart form-data parser. In versions 1.0.0 through 3.2.0, an attacker who can submit multipart form-data can crash the parser by sending a part header whose name is a prototype-inherited property such as __proto__ or constructor. The internal header parser stores headers in a plain JavaScript object and assumes each value is an array, so an inherited property name resolves to a truthy non-array value and triggers a TypeError. In the common pipe integration the failure surfaces as an error event, but in direct write or end usage the exception is thrown synchronously and can terminate the Node.js process, causing an unauthenticated denial of service. The issue is fixed in @fastify/busboy 3.2.1, which creates the header object with a null prototype. Users should upgrade to 3.2.1. |
| This vulnerability allows a normal (non-admin) user to disable the Forcepoint One Endpoint SafariExtension and bypass DLP protection in F1E Mac OS before v26.04.5758. |
