| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse OpenJ9 versions up to 0.60, when executing class files where a previously concrete superclass method has been recompiled as abstract, execution is incorrectly delegated to an interface default method. |
| RustCrypto CMOV provides conditional move CPU intrinsics which are guaranteed on major platforms to execute in constant-time and not be rewritten as branches by the compiler. From 0.1.1 until 0.5.4, the aarch64 implementations of Cmov and CmovEq in cmov/src/backends/aarch64.rs assume high bits are zero-extended when loading values smaller than a register, so set high bits such as [8..] in a Cmov selector or [16..] of self or other in the u16 and i16 CmovEq implementations can cause left.cmovz(&right, condition) to produce incorrect output. This issue is fixed in version 0.5.4. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload
There is a TOCTOU race condition in flower lockless approach between sizing
a flow_rule buffer and filling it.
zdi-disclosures@trendmicro.com reports:
The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED
(fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the
independent locking domains make the race reachable in practice. KASAN
confirms:
BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930
Write of size 4 at addr ffff888001f27520 by task poc-toctou/312
The buggy address is located 0 bytes to the right of
allocated 288-byte region [ffff888001f27400, ffff888001f27520)
(cache kmalloc-512)
Note: The result is a heap OOB write attacker-controlled content into the
adjacent slab object (requires CAP_NET_ADMIN).
The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places
using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys().
Additionally we close the remaining TOCTOU window between the sizing read and
the fill reads by more careful accounting.
Rather than silently truncating the key count, which leads to incorrect
action semantics offloaded to hardware and secondary OOB writes if
the remaining capacity is zero or consumed by prior actions, we enforce
remaining capacity checks and return -ENOSPC if the required space exceeds
the remaining capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes: Fix NULL pointer dereference in hprobe_expire()
Forking a task that has a pending uretprobe can oops the kernel with a
NULL pointer dereference in the clone() path:
BUG: kernel NULL pointer dereference, address: 0000000000000018
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:hprobe_expire
CR2: 0000000000000018
Call Trace:
uprobe_copy_process
copy_process
kernel_clone
__x64_sys_clone
do_syscall_64
entry_SYSCALL_64_after_hwframe
This was found on real hosts on Meta fleet.
I've got the impression that this is what is happening:
CPU 1 CPU 2 (traced task)
----- -------------------
hit uprobe, prepare_uretprobe():
hprobe LEASED, refcount >= 1
uprobe_unregister()
put_uprobe(): refcount -> 0
fork() -> dup_utask()
hprobe_expire(hprobe, true)
try_get_uprobe() -> NULL
get_uprobe(NULL) <-- Oops
Only take the extra reference when the uprobe is non-NULL; a NULL means
it is gone and is the correct value to return. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix deadlock waiting for ticket during data relocation
When performing data relocation on a zoned filesystem, BTRFS can deadlock
in handle_reserve_tickets(). The relocation process is waiting on a space
reservation ticket that can never be fulfilled, because the relocation
itself is the operation responsible for freeing up that space.
Fix this by introducing a new flush state,
BTRFS_RESERVE_FLUSH_ZONED_RELOCATION, specifically for data chunk
allocation during zoned relocation. Like
BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE, this state uses
priority_reclaim_data_space() instead of the normal flushing path, which
avoids re-entering the relocation code and breaking the deadlock cycle.
In btrfs_alloc_data_chunk_ondemand(), select this new flush state when the
inode belongs to a data relocation root on a zoned filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa: solidrun: Fix UB bug with devres
In psnet_open_pf_bar() and snet_open_vf_bar() a string later passed to
pcim_iomap_regions() is placed on the stack. Neither
pcim_iomap_regions() nor the functions it calls copy that string.
Should the string later ever be used, this, consequently, causes
undefined behavior since the stack frame will by then have disappeared.
Fix the bug by allocating the strings on the heap through
devm_kasprintf(). |
| In the Linux kernel, the following vulnerability has been resolved:
iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP
generic/077 on x86_32 CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y with highmem,
on huge=always tmpfs, issues a warning and then hangs (interruptibly):
WARNING: CPU: 5 PID: 3517 at mm/highmem.c:622 kunmap_local_indexed+0x62/0xc9
CPU: 5 UID: 0 PID: 3517 Comm: cp Not tainted 6.12.0-rc4 #2
...
copy_page_from_iter_atomic+0xa6/0x5ec
generic_perform_write+0xf6/0x1b4
shmem_file_write_iter+0x54/0x67
Fix copy_page_from_iter_atomic() by limiting it in that case
(include/linux/skbuff.h skb_frag_must_loop() does similar).
But going forward, perhaps CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is too
surprising, has outlived its usefulness, and should just be removed? |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: don't try to setup PHY-driven SFP cages when using genphy
We don't have support for PHY-driver SFP cages with the genphy code.
On top of that, it was found by sashiko that running
sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY
probing runs under RTNL, which isn't the case for non-genphy drivers.
This problem was reproduced, and does lead to a deadlock on RTNL.
Before the blamed commit, the phy_sfp_probe() call was made by
individual PHY drivers, so there was no way to get to the SFP probing
path when using genphy.
Let's therefore only run phy_sfp_probe when not using genphy. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent uninitialized lcn caused by zero len
syzbot reported a uninit-value in ntfs_iomap_begin [1].
Since runs was not touched yet, run_lookup_entry() immediately fails
and returns false, which makes the value of "*len" 0.
Simultaneously, the new value and err value are also 0, causing the
logic in attr_data_get_block_locked() to jump directly to ok, ultimately
resulting in *lcn being triggered before it is set [1].
In ntfs_iomap_begin(), the check for a 0 value in clen is moved forward
to before updating lcn to avoid this [1].
[1]
BUG: KMSAN: uninit-value in ntfs_iomap_begin+0x8c0/0x1460 fs/ntfs3/inode.c:825
ntfs_iomap_begin+0x8c0/0x1460 fs/ntfs3/inode.c:825
iomap_iter+0x9b7/0x1540 fs/iomap/iter.c:110
Local variable lcn created at:
ntfs_iomap_begin+0x15d/0x1460 fs/ntfs3/inode.c:786 |
| Ghidra before 11.2 contains a use after free vulnerability in the Sleigh backend caused by undefined static initialization order of the SleighArchitecture::translators and XmlArchitectureCapability singletons. Attackers can trigger an infinite loop or denial of service during shutdown by exploiting the unsafe destruction order that causes iteration over deallocated memory. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to 1.4.3, decode_signed32() in src/bacnet/bacint.c reconstructs a 32-bit signed integer from four APDU bytes using signed left shifts. When any of the four bytes has bit 7 set (value ≥ 0x80), the left-shift operation overflows a signed int32_t, which is undefined behavior per the C standard. This is flagged thousands of times per minute by UndefinedBehaviorSanitizer on any BACnet input containing signed-integer property values with high-bit-set bytes. This vulnerability is fixed in 1.4.3. |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Prior to version 2.3.1.6, there is an Undefined Behavior (UB) condition in IccUtil.cpp triggered by a crafted input profile. Under UndefinedBehaviorSanitizer, the issue is reported as invalid left shift operations on icUInt32Number (unsigned 32-bit) where the shifted value “cannot be represented” in that type. This issue has been patched in version 2.3.1.6. |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Prior to version 2.3.1.6, an Undefined Behavior (UB) condition in IccUtil.cpp can be triggered by a crafted ICC profile when running iccDumpProfile. This issue has been patched in version 2.3.1.6. |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Prior to version 2.3.1.6, a crafted ICC profile can trigger Undefined Behavior (UB) in CIccOpDefEnvVar::Exec() due to invalid enum values being loaded for icSigCmmEnvVar. The issue is observable under UBSan as a “load of value … not a valid value for type icSigCmmEnvVar”, indicating an invalid enum/type value being consumed during ICC profile processing. This issue has been patched in version 2.3.1.6. |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Prior to version 2.3.1.6, a crafted ICC profile can trigger Undefined Behavior (UB) in CIccCalculatorFunc::ApplySequence() due to invalid enum values being loaded for icChannelFuncSignature. The issue is observable under UBSan as a “load of value … not a valid value for type icChannelFuncSignature”, indicating a type/enum value confusion scenario during ICC profile processing. This issue has been patched in version 2.3.1.6. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of International Color Consortium (ICC) color management profiles. Versions prior to 2.3.1.2 have Undefined Behavior in `CIccTagLut16::Read()`. This vulnerability affects users of the iccDEV library who process ICC color profiles. Version 2.3.1.2 contains a patch. No known workarounds are available. |
| iccDEV provides libraries and tools for interacting with, manipulating, and applying ICC color management profiles. Versions 2.3.1.1 and below have Undefined Behavior in icSigCalcOp(). This occurs when user-controllable input is unsafely incorporated into ICC profile data or other structured binary blobs. Successful exploitation may allow an attacker to perform DoS, manipulate data, bypass application logic and Code Execution. This issue has been fixed in version 2.3.1.2. |
| iccDEV provides libraries and tools for interacting with, manipulating, and applying ICC color management profiles. Versions 2.3.1.1 and below have Undefined Behavior and Null Pointer Deference in CIccTagXmlFloatNum<>::ParseXml(). This occurs when user-controllable input is unsafely incorporated into ICC profile data or other structured binary blobs. Successful exploitation may allow an attacker to perform DoS, manipulate data, bypass application logic and Code Execution. This issue has been fixed in version 2.3.1.2. |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Versions 2.3.1 and below have Undefined Behavior in its CIccCLUT::Init function which initializes and sets the size of a CLUT. This issue is fixed in version 2.3.1.1. |
