| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: slram: remove failed entries from the device list
register_device() links a new slram_mtdlist entry before allocating all
of the state needed by the entry. If a later allocation, memremap(), or
mtd_device_register() fails, the partially initialized entry remains on
the global list. A later cleanup can then dereference or free invalid
state from that failed entry.
Unwind the partially initialized entry and clear the list tail on each
failure path after the entry has been linked. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-fence: Make dma_fence_dedup_array() robust against 0-count input
dma_fence_dedup_array() returns 1 when called with num_fences == 0:
the for-loop body never executes, j stays at 0, and the final
`return ++j` yields 1. This contradicts both the kernel-doc ("Return:
Number of unique fences remaining in the array") and the natural
expectation that 0 input gives 0 output.
The caller __dma_fence_unwrap_merge() bails out via the
`if (count == 0 || count == 1)` fast path and so is save.
But amdgpu_userq_wait_*() could reach the dedup call with a zero local
count and dereference an uninitialized fence slot in the array.
Make the contract match the documentation by returning 0 early. This
also skips an unnecessary sort() call on an empty array. |
| In the Linux kernel, the following vulnerability has been resolved:
device property: initialize the remaining fields of fwnode_handle in fwnode_init()
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitialized memory which likely
will be neither NULL nor IS_ERR() and so may end up being dereferenced
(for example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization. While at it: initialize the remaining fields of struct
fwnode_handle too just to be sure.
[ Fix typo in commit message. - Danilo ] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: support IPIP tunnel with direct xmit
The combination of IPIP tunnel with direct xmit, eg. bridge device,
breaks because no dst_entry is provided to check the skb headroom and to
set the iph->frag_off field. This leads to invalid dst usage and can
trigger a crash in the tunnel transmit path.
Fix this by moving dst_cache and dst_cookie out of the runtime union so
that they can be shared by neighbour, xfrm, and direct tunnel flows.
For FLOW_OFFLOAD_XMIT_DIRECT tuples carrying tunnel metadata, preserve
route state in these shared fields and release it through the common
dst release path.
Since dst_entry is now available to the three supported xmit modes and
dst_release() already deals with NULL dst, remove the xmit type check
in nft_flow_dst_release(). Moreover, skip the check if the dst entry
is NULL in nf_flow_dst_check() which is now the case for the direct
xmit case.
Based on patch from Rein Wei <n05ec@lzu.edu.cn>. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit
ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange
a kmalloc'd buffer pointer through a struct kfifo, but pass a literal
'4' as the byte count to kfifo_in()/kfifo_out().
This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the
low 4 bytes of the 8-byte pointer are written into the FIFO. The reader
then reads back 4 bytes into an 8-byte local pointer variable, leaving
the upper 4 bytes uninitialized stack data. The first dereference of
the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel
address and generally results in an oops.
Use sizeof(fifo_buffer) so the byte count matches pointer width on every
architecture.
The driver has no architecture restriction in Kconfig, so any 64-bit
build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has
been latent since the driver was added in 2017 because it is most
commonly deployed on 32-bit MCUs.
Found via a custom Coccinelle semantic patch hunting for short-byte
kfifo I/O on byte-mode kfifos used to shuttle pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: probes: save original sp in rethook trampoline
Reading a word from the stack in a kretprobe crashes a risc-v kernel.
$ cd /sys/kernel/tracing/
$ echo 'r n_tty_write $stack0' > dynamic_events
$ echo 1 > events/kprobes/enable
Unable to handle kernel paging request at virtual address 0000000200000128
...
[<ffffffff80016d16>] regs_get_kernel_stack_nth+0x26/0x38
[<ffffffff80177196>] process_fetch_insn+0x3ee/0x760
[<ffffffff80177836>] kretprobe_trace_func+0x116/0x1f0
[<ffffffff8017795a>] kretprobe_dispatcher+0x4a/0x58
[<ffffffff8013572e>] kretprobe_rethook_handler+0x5e/0x90
[<ffffffff80180838>] rethook_trampoline_handler+0x70/0x108
[<ffffffff8001ba32>] arch_rethook_trampoline_callback+0x12/0x1c
[<ffffffff8001ba84>] arch_rethook_trampoline+0x48/0x94
[<ffffffff8067872a>] tty_write+0x1a/0x30
In regs_get_kernel_stack_nth, regs->sp contains an arbitrary value.
arch_rethook_trampoline saves the registers from the probed function in a
struct pt_regs. sp is not saved. Instead, sp is decremented for
arch_rethook_trampoline's local stack.
Fix this crash and save the original sp along with the other registers.
Use a0 as a temporary register, it is overwritten anyway.
[pjw@kernel.org: added Fixes tag; cc'ed stable] |
| FFmpeg versions from 0.5 up to, but not including, 9.0 contain an uninitialized heap memory disclosure vulnerability in the native TIFF decoder in libavcodec/tiff.c. An attacker who can cause FFmpeg to decode a crafted TIFF file can supply a valid Deflate-compressed strip that terminates successfully after producing fewer bytes than the declared strip requires. The tiff_unpack_zlib() function allocates a heap buffer sized for the full declared strip but copies all declared rows via memcpy() regardless of how many bytes zlib actually decompressed, causing unwritten bytes that can contain stale data from prior heap allocations to be incorporated into decoded image output and potentially exposing sensitive data in persistent services. |
| FFmpeg versions from 3.0 up to, but not including, 9.0 contain an uninitialized heap memory read vulnerability in the native Screenpresso decoder (libavcodec/screenpresso.c) that allows attackers to recover sensitive memory contents by supplying a crafted SPV1 packet with a valid zlib stream that decompresses fewer bytes than the full frame requires. The screenpresso_decode_frame() function fails to validate the produced byte count before calling av_image_copy_plane() to copy the complete frame dimensions from the persistent ctx->inflated_buf buffer, causing unwritten heap memory from prior allocations or prior frames to be copied into decoded output and potentially exposing sensitive data such as userspace addresses from persistent decoding services. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ep93xx: fix error pointer deref after DMA setup failure
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to the clear the DMA channel pointers on setup failure to
avoid dereferencing an error pointer on later probe errors or driver
unbind.
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
nft_exthdr_init() passes user-controlled priv->len to
nft_parse_register_store(), which marks that many bytes in the
register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT
is set, the eval paths write only 1 byte (nft_reg_store8) or
4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4,
registers beyond the first are never written, retaining
uninitialized stack data from nft_regs.
Bail out if userspace requests too much data when F_PRESENT is set. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: core: fix uninitialized data in debugfs
If *ppos is non-zero then simple_write_to_buffer() will not initialize
the start of buf[]. Non zero values for *ppos aren't going to work
anyway. Test for them at the start of the function and return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: initialize SDIO data work before cleanup
brcmf_sdio_probe() stores the newly allocated bus in sdiodev->bus before
allocating the ordered workqueue. If that allocation fails, the function
jumps to fail and calls brcmf_sdio_remove().
brcmf_sdio_remove() unconditionally cancels bus->datawork. Initialize the
work item before the first failure path that can reach brcmf_sdio_remove(),
so the cleanup path always observes a valid work object.
This issue was found by our static analysis tool and then confirmed by
manual review of the probe error path and the remove-time work drain. The
problem pattern is an early setup failure that reaches a cleanup helper
which cancels an embedded work item before its initializer has run.
A QEMU PoC forced alloc_ordered_workqueue() to fail at the same point in
brcmf_sdio_probe(), before INIT_WORK(&bus->datawork) is reached. The
resulting fail path calls brcmf_sdio_remove(), and DEBUG_OBJECTS reports
the invalid work drain with brcmf_sdio_probe() and brcmf_sdio_remove() in
the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
device property: set fwnode->secondary to NULL in fwnode_init()
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitalized memory which likely will
be neither NULL nor IS_ERR() and so may end up being dereferenced (for
example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_slice_module module. When the slice directive and unnamed regex captures are configured or when a background cache update happens, unauthenticated attackers can send requests that may cause uninitialized memory access in the NGINX worker process, leading to limited disclosure of memory or a restart.
Impact:
This vulnerability may allow remote, unauthenticated attackers to have limited control to disclose memory contents or restart the NGINX worker process. There is no control plane exposure; this is a data plane issue only.
Note: The ngx_http_slice_module module is not enabled by default; it's enabled with the --with-http_slice_module configuration parameter.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix NULL pointer dereference in ath11k_hal_srng_access_begin
In ATH11K_QMI_EVENT_FW_READY, ATH11K_FLAG_REGISTERED is set
unconditionally even when ath11k_core_qmi_firmware_ready() fails.
This leaves the driver in an inconsistent state where
initialization is considered complete although the firmware ready
handling did not finish successfully. During the subsequent SSR,
the driver enters the restart path based on this incorrect state
and dereferences uninitialized srng members, resulting in a NULL
pointer dereference.
Call trace:
ath11k_hal_srng_access_begin+0xc/0x60 [ath11k] (P)
ath11k_ce_cleanup_pipes+0x17c/0x180 [ath11k]
ath11k_core_restart+0x40/0x168 [ath11k]
Fix this by:
- skipping firmware_ready if ATH11K_FLAG_REGISTERED is already set
- setting ATH11K_FLAG_REGISTERED only when firmware_ready succeeds
- setting ATH11K_FLAG_QMI_FAIL and aborting the FW_READY handling
on error
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00204-QCAMSLSWPLZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: comedi_parport: deal with premature interrupt
Syzbot reported a general protection fault in
`comedi_get_is_subdevice_running()`, which was called from the interrupt
handler `parport_interrupt()` in the "comedi_parport" driver, but it
does not currently have a C reproducer for the problem. It's
probably due to a premature interrupt for one of two reasons:
1. The driver sets up the interrupt handler before the comedi subdevices
used by the interrupt handler have been allocated, but does not
disable the interrupt in the parallel port's CTRL register first.
2. The driver uses a user-supplied I/O port base address which Syzbot
would have supplied, but it might not be backed by real parallel port
hardware.
Change the initialization order in the driver's comedi "attach" handler
(`parport_attach()`) so that the hardware registers are initialized
before the interrupt handler is requested. This should prevent
premature interrupts occurring for real hardware.
Also add a test to the interrupt handler to ensure the comedi device is
fully attached and return early if it isn't. |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: initialize extack in nh_res_bucket_migrate()
nh_res_bucket_migrate() passes an uninitialized netlink_ext_ack to
call_nexthop_res_bucket_notifiers(). When
nh_notifier_res_bucket_info_init() fails (e.g. the kzalloc returns
-ENOMEM), the error is propagated back before any notifier sets
extack._msg, and the error path formats the stale pointer with
pr_err_ratelimited("%s\n", extack._msg). With CONFIG_INIT_STACK_NONE
this dereferences uninitialized stack memory:
Oops: general protection fault, probably for non-canonical address ...
KASAN: maybe wild-memory-access in range [...]
RIP: 0010:string (lib/vsprintf.c:730)
vsnprintf (lib/vsprintf.c:2945)
_printk (kernel/printk/printk.c:2504)
nh_res_bucket_migrate (net/ipv4/nexthop.c:1816)
nh_res_table_upkeep (net/ipv4/nexthop.c:1866)
rtm_new_nexthop (net/ipv4/nexthop.c:3323)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
Kernel panic - not syncing: Fatal exception
Zero-initialize extack so _msg is NULL on error paths that never set it. |
| Uninitialized Use in GPU in Google Chrome on Android prior to 151.0.7922.109 allowed a remote attacker who had compromised the renderer process to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: High) |
| Uninitialized Use in Skia in Google Chrome on Windows prior to 151.0.7922.72 allowed a remote attacker to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: Low) |
