Export limit exceeded: 398341 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398341 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98108 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan l2cap_new_connection() sets default value of channel mode to match the parent channel. l2cap_le_connect_req() left this at the default, and created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that mode. This causes FLAG_DEFER_SETUP channels to reply to L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect. It can also result to stack OOB write (of l2cap_alloc_cid determined values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not limit maximum number of deferred channels or check for duplicate ident. Fix by setting chan->mode correctly in l2cap_le_connect_req(). Also check channel mode in l2cap_ecred_rsp_defer(), and do WARN_ON_ONCE instead of OOB write to make it less brittle. | ||||
| CVE-2026-98115 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely drain sessions during logoff SMB3 multichannel allows requests for one session to run on multiple connections. Wait for all channels bound to a session before freeing shared session objects. A deferred byte-range lock remains counted as a running request and only wakes when its file closes. Wake blocked locks during the drain without unpublishing or modifying their file objects. Synchronous CANCEL requests must invoke their cancellation callback to wake pending operations, while CHANGE_NOTIFY completion remains specific to the asynchronous path. Serialize session teardown with channel registration and previous-session cleanup, and use atomic work-state transitions so LOGOFF, CANCEL, and connection teardown invoke cancellation callbacks only once. | ||||
| CVE-2026-98122 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix use-after-free in vxlan_mdb_remote_src_del() vxlan_mdb_is_valid_source(), which validates MDBE_ATTR_SOURCE and every MDBE_ATTR_SRC_LIST member, accepts the all-zeros address. A source list is only accepted on a (*, G) entry, whose source is the all-zeros address, and for each member of the list an (S, G) entry is derived from it by substituting the source. Entries are keyed by a plain memcmp() of struct vxlan_mdb_entry_key, so if MDBE_ATTR_SOURCE is present and holds the all-zeros address and the source list holds it as well, the derived (S, G) key is byte-identical to the (*, G) key and resolves to the same entry. Omitting MDBE_ATTR_SOURCE is not equivalent, as the key is then left with a zero address family. vxlan_mdb_remote_src_del() removes the forwarding entry of a source before freeing the source entry: vxlan_mdb_remote_src_fwd_del(vxlan, group, remote, &ent->addr); vxlan_mdb_remote_src_entry_del(ent); With the keys aliased, the first call deletes the remote of the entry that owns 'ent' instead of a separate (S, G) entry, and frees 'ent'. The second call then runs on the freed entry, and its hlist_del() reads ->pprev and ->next out of it and writes through them. Adding the (*, G) entry with NLM_F_REPLACE and no source list marks the all-zeros source for deletion and reaches this from the sweep at the end of vxlan_mdb_remote_srcs_replace(). BUG: KASAN: slab-use-after-free in __vxlan_mdb_add+0x1cd/0xd70 Read of size 8 at addr ffff888102852500 by task poc/84 __vxlan_mdb_add+0x1cd/0xd70 vxlan_mdb_add+0xc0/0x140 rtnl_mdb_add+0x157/0x2a0 rtnetlink_rcv_msg+0x207/0x5a0 Allocated by task 84: __kmalloc_cache_noprof+0x153/0x360 vxlan_mdb_remote_srcs_add+0x2eb/0x440 __vxlan_mdb_add+0x803/0xd70 Freed by task 84: kfree+0x14c/0x3b0 vxlan_mdb_remote_del+0x129/0x1a0 __vxlan_mdb_del+0x4f/0xe0 vxlan_mdb_remote_src_fwd_del.isra.0+0x162/0x1b0 __vxlan_mdb_add+0x1c5/0xd70 The MDB operations are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Reject the all-zeros address in vxlan_mdb_is_valid_source(), which covers both call sites. A (*, G) entry is expressed by omitting the source, so nothing legitimate is refused. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-98143 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Don't read the U65 rounding mode as a storage mode Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage mode on U85 only. On U65 the same field holds the rounding mode, and the command stream parser has read it as a storage mode since the driver was added. That went unnoticed while unknown values fell through the switch, but now that they are rejected, every U65 command stream that asks for natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits it for average pooling, concatenation, split, unpack, strided slice, LUT and argmax, which is 72 failures of the Teflon test suite on an i.MX93. Truncating rounding (1) is misread as well: it picks the two-tile address path and computes a bogus feature map size from tile bases the command stream never set. Read the field as a storage mode only on the hardware where it is one. | ||||
| CVE-2026-98150 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix BPF_F_CPU validation for sparse CPU IDs BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map operation flags. bpf_map_check_op_flags() currently compares that ID with num_possible_cpus(), which is the number of possible CPUs rather than a bound on CPU IDs. On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU mask was 0,2-3. A userspace program using raw bpf() syscalls creates a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations for each CPU by setting BPF_F_CPU and the CPU ID in the flags. With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map access path and triggers: Unable to handle kernel paging request at virtual address ... pc : __pi_memcpy_generic+0x5c/0x22c lr : bpf_percpu_array_update+0x2dc/0x2e8 Call trace: __pi_memcpy_generic bpf_map_update_value map_update_elem __sys_bpf Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This rejects CPU IDs outside the valid range and CPUs absent from the possible mask, while allowing valid sparse CPU IDs. | ||||
| CVE-2026-98156 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use the DMA API for resource backing on Xen On a Xen PV domain page addresses bear no relation to the real machine addresses the host would have to use to reach it. virtio_ring.c handles this correctly, vring_use_map_api() returns true for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM. virtio-gpu makes the same decision independently, but its copy looks only at the feature bit: bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev); QEMU does not set iommu_platform on virtio-vga by default, so VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and virtio_gpu_object_shmem_init() describes the framebuffer's backing pages to the host with sg_phys(). Those are guest-physical addresses. In a PV domain they resolve, on the host side, to pages belonging to some other domain, so the host scans out unrelated memory. Move the decision into virtio_gpu_use_dma_api() and give it the xen_domain() check, like vring_use_map_api() has. This additionally enables the dma_sync_sgtable_for_device() calls in virtgpu_vq.c, which are required for correctness whenever swiotlb is in play. Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0 works fine and doesn't need this fix because it is identity-mapped, only PV dom0s are affected. | ||||
| CVE-2026-91768 | 2026-09-25 | 6.5 Medium | ||
| The IPv6 branch of the FastCGI client access check compares only the first 12 bytes of a 16-byte IPv6 address, so listen.allowed_clients matches on a /96 prefix instead of the exact address. An attacker who can source an address sharing the first 96 bits with an allowed one passes the check and reaches the FastCGI endpoint. | ||||
| CVE-2026-92842 | 2026-09-25 | 5.9 Medium | ||
| The convert.base64-encode, convert.quoted-printable-encode and convert.quoted-printable-decode stream filters accept a line-break-chars option whose length is tracked separately from the string itself. The filter constructors duplicate the value with pestrdup(), which stops at the first NUL byte, while keeping the original length. When the filter later emits a line break it copies the recorded length out of the truncated allocation, reading past its end and placing adjacent heap bytes into the filter output. | ||||
| CVE-2026-2604 | 2 Gnome, Redhat | 2 Evolution-data-server, Enterprise Linux | 2026-09-25 | 5.6 Medium |
| A flaw was found in evolution-data-server. Inconsistent comparison logic in the addressbook file backend allows a Flatpak application with D-Bus access to craft a malicious URI containing directory traversal sequences. This URI is stored without proper validation during contact creation or modification. Later, during contact deletion, the URI is processed with a less strict check, leading to the deletion of arbitrary files on the host filesystem. This could potentially include critical Flatpak override files. | ||||
| CVE-2026-97539 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: xusbatm: don't rely on id table pointer arithmetic The current code is broken when dynamic ID is involved; in such cases usb_device_id parameter of probe lives on the heap and the pointer arithmetic will get an index that is wildly out of bound. xusbatm initialize the USB device IDs dynamically so it can just use driver_info too. Even with conversion, xusbatm still cannot support dynamic IDs, so also set no_dynamic_id. | ||||
| CVE-2026-97541 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: don't store usb_device_id usb_device_id is not guaranteed to live longer than probe due to presence of dynamic ID. All information apart from driver_data can be easily retrieved from usb_device, so just store driver_data. | ||||
| CVE-2026-97563 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject out-of-bounds DataOffset in CIFSSMBRead() The SMB1 synchronous read helper CIFSSMBRead() validates the server's DataLength against CIFSMaxBufSize and the caller's count, but never validates DataOffset. The copy source is formed as &pSMBr->hdr.Protocol + le16_to_cpu(pSMBr->DataOffset) and memcpy()'d for DataLength bytes with no check that the [DataOffset, DataOffset + DataLength) range lies within the response actually received from the server. A malicious or compromised SMB1 server can return a response carrying an in-range DataLength and a large DataOffset, driving the source pointer past the end of the response buffer. The memcpy() then copies adjacent kernel heap into the caller's read buffer (information disclosure), or reads unmapped memory and oopses (denial of service). SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Both DataOffset and the received response length recorded in rsp_iov.iov_len are relative to the start of the SMB header, so reject the response unless DataOffset + DataLength fits within that length, using overflow-safe arithmetic, before forming the source pointer. The response length has been validated by the previous patch, so the DataOffset and DataLength fields can be read safely here. While here, make data_length unsigned. It holds a length derived from unsigned on-the-wire fields and is only ever compared against unsigned quantities; print it with %u accordingly, and add __func__ to the cifs_dbg() calls in this function. | ||||
| CVE-2026-97569 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Prevent queue stop with deferred completions When the driver receives a burst of packets, it can mark a BD with the NO_CMPL bit to defer completions. The expectation is that the last packet in the ring will have this bit unset and the completion generated by that packet will cleanup that packet and the ones preceding it. This helps to reduce the number of completions fired. The suppressed completions are controlled by the driver and the number of packets with suppressed completions scales with the size of the ring. SW USO packets, on the other hand, have an upper bound on the maximum number of BDs which can be consumed which does not scale with the ring size. So, for small rings it is possible that: a burst of packets is handed to the driver, the driver defers completions for all of the packets because the number of free descriptors stays above the threshold in the driver. Then, a USO packet arrives, but the number of BDs available is not enough and the USO code exits early. In this case, you end up in a state where the ring is full of packets with their completions suppressed, which can cause the queue to stop and never be restarted. Assuming default CONFIG_MAX_SKB_FRAGS, this is only possible for small rings (<= 457 descriptors, below the driver default value) when a burst of packets fills the ring, followed by a large USO packet that can't fit. For larger rings, the delta between the completion suppression threshold and the BDs required for SW USO is large enough that completions will fire and this case is unreachable. This issue was pointed out by Sashiko and while it seems fairly unlikely given that the queue size must be small to trigger this, it is indeed possible. Fix this by tracking the last BD which deferred completions and centralizing the logic for deciding when to ring the doorbell. The NO_CMPL bit is now cleared in bnxt_txr_db_kick(), so every doorbell site is covered, including the SW USO early exit. This guarantees the ring always ends in a BD which generates a completion to clean it and wake the queue. | ||||
| CVE-2026-97570 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Bound SW TPA IDs to prevent crashes FW supports up to 1024 concurrent TPAs, so the FW TPA ID is in the range 0..1023 (see commit ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.")). bnxt_alloc_agg_idx is intended to wrap the FW ID down to a software ID which is used to index rxr->rx_tpa, and to generate a mapping between FW IDs and the wrapped software ID. On a 57608 with firmware version 233, the firmware advertises 32 concurrent TPAs. As of the commit under fixes, bp->max_tpa on this NIC is set to 32. If the software ID from bnxt_alloc_agg_idx is above 31, this results in an invalid address being loaded on this line: tpa_info = &rxr->rx_tpa[agg_id]; because rx_tpa is allocated with only bp->max_tpa (32) entries. Writes to tpa_info later in the code are out of bounds. This bug results in a crash at boot: Oops: general protection fault, kernel NULL pointer dereference 0x8: 0000 [#1] SMP NOPTI RIP: 0010:bnxt_rx_pkt+0xc0/0x1560 RSP: 0018:ffffc900009b8c78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000048 RCX: 0000000206682516 RDX: ffffc900009b8db4 RSI: 0000000000000000 RDI: 01ffffff038fe1c0 RBP: ffffc9006e687480 R08: ffffc9006e687000 R09: 0000000000003048 R10: 0000000000000480 R11: ffff8881c6083900 R12: 0000000006682516 R13: ffff8881c6095400 R14: 0000000000000016 R15: ffff8881c6b66680 FS: 0000000000000000(0000) GS:ffff88fef3c77000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc8bda40584 CR3: 000000807c812001 CR4: 0000000008772ef0 PKRU: 55555554 Call Trace: <IRQ> ? __netif_receive_skb_list_core+0x1ca/0x250 __bnxt_poll_work+0x152/0x280 bnxt_poll_p5+0x1cd/0x480 __napi_poll+0x30/0x180 net_rx_action+0x20b/0x3b0 ? note_gp_changes+0x53/0xe0 ? tick_setup_sched_timer+0x180/0x180 ? __napi_schedule+0x9a/0xb0 ? bnxt_msix+0x24/0x30 handle_softirqs+0xdd/0x2c0 __irq_exit_rcu.llvm.3171231171502365008+0x47/0xf0 common_interrupt+0x85/0x90 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 This stack trace is from a crash triggered when an out of bounds rx_tpa is dereferenced. The invalid write mentioned above is silent in this particular crash. Fix this by allocating rx_tpa with bp->max_tpa rounded up to the next power of 2 (bp->max_tpa_roundup_size) entries and masking the FW TPA ID with that size, so the wrapped ID can never index past the end of the array. | ||||
| CVE-2026-97575 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate AV1 tile counts The stateless AV1 decoders use tile_info.tile_cols and tile_rows as loop bounds and as indices into the mi_*_starts[] and *_in_sbs_minus_1[] arrays, as the divisor for context_update_tile_id, and their product bounds the per-tile descriptor buffers, but std_validate_compound() does not bound these u8 fields. Reject a V4L2_CTRL_TYPE_AV1_FRAME whose tile_cols or tile_rows exceeds V4L2_AV1_MAX_TILE_COLS / _ROWS, or whose product exceeds V4L2_AV1_MAX_TILE_COUNT. A zero tile count is left to the consuming driver so the zero-initialised control that existing userspace submits is still accepted. | ||||
| CVE-2026-97584 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix incorrect free in candidate cleanup in afs_lookup_server() Fix afs_lookup_server() to not free an existing server's endpoint state when cleaning up a candidate server. The candidate record doesn't have an endpoint state yet at this point, so the free for that can just be removed. | ||||
| CVE-2026-97586 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix missing kunmap in afs_dir_search_bucket() Fix afs_dir_search_bucket() to kunmap the block it's using in the "bad:" path. | ||||
| CVE-2026-97587 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf: RISC-V: store available counter mask as bitmap The available-counter mask was a single unsigned long, but iteration uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object. Filling with an unsigned-long bit at index 32 and above is also wrong. Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word into CFG_MATCH when checking events, when allocating an index, and when stopping all counters. Set the counter base to i times BITS_PER_LONG. Share the CFG_MATCH ecall through a small helper so the 32-bit argument split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits above XLEN set, so the first word alone is not enough. [pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] | ||||
| CVE-2026-97592 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix missing scrub of temp buffers with AES ctr and gcm algorithm In function ctr_aes_crypt() there is a buffer used to process remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and thus could lead to expose of unwanted data. When the buffer is used explicitly scrub it at the end of the code block to avoid exposure of maybe sensitive data. In a similar way the function gcm_aes_crypt() hat an error path where the CPACF param block was not scrubbed. Instead of return early now these error paths go to end of function where explicit scrubbing is done. Similar with the buffers which are part of the gcm_sg_walk structs from the variables gw_in and gw_out. | ||||
| CVE-2026-97608 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_log: unregister loggers before per-net teardown nf_log_syslog and nfnetlink_log unregister their per-network namespace operations before unregistering their global logger backends. This leaves a window where a sysctl or netlink writer can rebind the still- registered logger after the per-net pre-exit callback cleared the old selection. The race looks like this: CPU 0 CPU 1 ---- ---- unregister_pernet_subsys() nf_log_unset(net, logger) net->nf.nf_loggers[pf] = NULL lock nf_log_mutex find logger in loggers[][] net->nf.nf_loggers[pf] = logger unlock nf_log_mutex nf_log_unregister(logger) lock nf_log_mutex loggers[pf][type] = NULL unlock nf_log_mutex synchronize_rcu() module exit returns module core frees backend memory Later, a sysctl read or packet logging operation can dereference the stale per-net logger pointer. Fix this by unregistering the global logger backends before tearing down per-net state. Once the global registrations are gone, later writers can no longer rebind the logger. unregister_pernet_subsys() already waits for an RCU grace period after the pre-exit callback clears the per-net selection, while nf_log_unregister() continues to cover readers of the global logger table. Apply this ordering fix to both nf_log backends that combine per-net teardown with global logger registration. | ||||