Export limit exceeded: 399461 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (399461 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98147 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: printk: Don't WARN on kthread_run failure. Since __kthread_create_on_node() returns -EINTR upon SIGKILL, we should not use WARN_ON() in order to catch kthread_run() failure. | ||||
| CVE-2026-98151 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic Take the following unprivileged program as an example: r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */ ... 14: r0 += r1 /* r1 is a bounded scalar */ 15: r9 = r0 Loading it triggers a verifier warning from reg_bounds_sanity_check(): verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out of sync with range bounds r64={.base=0x0, .size=0x0} r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0) What happens: 1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(), the new offset is computed into dst_reg's var_off and 32/64-bit ranges. 2. Because pointer registers do not track 32-bit subregister bounds, __mark_reg32_unbounded() first sets r32 to the full range; r32 is re-derived from the offset at the end of the function by reg_bounds_sync(). 3. On the unprivileged path, sanitize_ptr_alu() is called and, via sanitize_speculative_path() -> push_stack(), snapshots the current register state and schedules the next instruction (insn 15) to be verified directly as a speculative path. 4. That snapshot is taken between step 2 and the final reg_bounds_sync(): at this point dst_reg's var_off still holds the (const) original offset while r32 has just been blanked to the full range, i.e. the two are out of sync. When the speculative path later verifies insn 15 (r9 = r0), the inconsistent state reaches reg_bounds_sanity_check() and trips the warning. var_off and the 32-bit range must always be consistent. There are two ways to keep the snapshot consistent: 1. sync var_off and r32 before the snapshot so they match, or 2. leave r32 at its original (already consistent) value and blank it only after the snapshot. The whole point of sanitize_ptr_alu() is to insert a harmless masking sequence that keeps the access in bounds under speculation, so the state it snapshots should faithfully represent that. Take approach 2: move __mark_reg32_unbounded() to after sanitize_ptr_alu(), so the speculative snapshot keeps the pointer's original, consistent r32. The non-speculative path is unchanged: r32 is still blanked before the offset is applied and re-derived by reg_bounds_sync(). | ||||
| CVE-2026-69436 | 1 Microsoft | 18 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 15 more | 2026-09-25 | 7.8 High |
| Heap-based buffer overflow in Windows Error Reporting allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-73242 | 1 Freerdp | 1 Freerdp | 2026-09-25 | 9.1 Critical |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.30.0, FreeRDP's winpr/libwinpr/sspi/Kerberos/kerberos.c kerberos_DecryptMessage function fails to bound the peer-controlled GSS Wrap-token EC field before using it with RRC in IOV pointer offsets, allowing a malicious RDP peer to trigger out-of-bounds reads and in-place writes during CredSSP/NLA Kerberos decryption. This issue is fixed in version 3.30.0. | ||||
| CVE-2026-69440 | 1 Microsoft | 6 Windows 11 24h2, Windows 11 24h2, Windows 11 25h2 and 3 more | 2026-09-25 | 7 High |
| Time-of-check time-of-use (toctou) race condition in Windows MIDI Service Module allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-67276 | 1 Mikrotik | 1 Routeros | 2026-09-25 | 8.1 High |
| RouterOS does not compare the complete RSA public key when matching an SSH authentication request to an authorized user key, checking the key type and modulus but omitting the exponent. Because signature verification uses the client-supplied key, an attacker knowing an authorized RSA modulus can supply a key with exponent one, forge a valid signature, and open an SSH command channel as the target user without the private key.This issue affects only 7.x branch was fixed in versions: 7.23.4 (Long-term) and 7.24.2 (Stable) | ||||
| CVE-2026-67278 | 1 Mikrotik | 1 Routeros | 2026-09-25 | 9.1 Critical |
| MikroTik RouterOS accepts malformed RSA/PKCS#1 v1.5 signatures across RSA-based services, including TLS/X.509 certificate validation and SSH host-key authentication. Because its trust store includes an e=3 root CA, an attacker controlling or redirecting an outbound RouterOS TLS connection can use the root’s public certificate - without its private key - to forge a trusted intermediate and issue certificates for arbitrary hostnames, enabling TLS server impersonation. The same permissive verification also undermines RSA-based SSH authentication. This issue affects only 7.x branch was fixed in versions: 7.23.6 (Long-term) and 7.24.3 (Stable). Releases 7.23.4 and 7.24.2 included an incomplete fix. | ||||
| CVE-2026-97963 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: initialize ptp_lock at probe time priv->ptp_lock is only initialized in stmmac_ptp_register(), which runs during __stmmac_open(). However, the lock is also used while the interface is down and has never been opened: tc_taprio_configure() invokes the PTP gettime64() callback to compute the EST base time when offloading a TAPRIO schedule, and stmmac_get_time() takes priv->ptp_lock. Using an uninitialized rwlock is undefined behaviour. Move the rwlock_init() to __stmmac_dvr_probe(), together with the other private locks, so that ptp_lock is always valid regardless of the interface state. | ||||
| CVE-2026-97964 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ppp_synctty: ensure a writeable skb header ppp_sync_txmunge() checks headroom before prepending the address and control bytes, but does not ensure that the skb header is writable. A received skb can reach this function through PPP channel bridging without passing through ppp_start_xmit(), which calls skb_cow_head(). For example, a PPPoE frame may share its buffer with a clone queued to an AF_PACKET socket. If it is bridged to a synchronous tty channel, the address/control bytes can overwrite data still visible to that socket. Use skb_cow_head() to ensure both sufficient headroom and a writable header. | ||||
| CVE-2026-97966 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: reset HTB scheduler topology before freeing queues HTB offload programs NIX_AF_TLxX_TOPOLOGY on QoS-allocated scheduler queues via otx2_qos_txschq_set_parent_topology(), but teardown freed those queues without clearing TOPOLOGY. The AF only restores PARENT and SCHEDULE on free, so PRIO_ANCHOR/RR_PRIO settings can survive in the shared scheduler pool and affect later allocations. Add otx2_qos_reset_schq_topology() and otx2_qos_free_hw_schq() to zero TL4 through TL2 TOPOLOGY before each schq is returned to the AF during hierarchy teardown and cfg rollback. Skip the aggregation level (TL1): it is a per-tx-link queue shared by the PF, default Tx hierarchy and VFs, and is not freed back to the AF by nix_txschq_free_one(). | ||||
| CVE-2026-97967 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Remove debugfs entries when probe fails ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. If hwmon_device_register_with_info() fails right after it, ccp_probe() returns without removing them: the HID core then frees ccp, and ccp_remove() is not called for a failed probe, so the files stay behind. Reading one of them dereferences the freed pointer. Remove the debugfs entries on that error path. debugfs_remove_recursive() waits for readers already inside the show callbacks, so ccp is no longer reachable through debugfs by the time probe returns. | ||||
| CVE-2026-97968 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Create debugfs entries after hwmon registration ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. It runs before hwmon_device_register_with_info(), so when that registration fails, ccp_probe() returns with the files still in place. The HID core then frees ccp, and ccp_remove() is not called for a failed probe, so nothing removes them later either. Reading one of the files dereferences the freed pointer. Create the debugfs entries only after the hwmon device has been registered, so no failing path can leave them behind. The two version queries stay where they are. They send USB commands without holding ccp->mutex, which is only safe as long as nothing else can call send_usb_cmd(); once the hwmon device is registered its callbacks can do so concurrently. Only the debugfs creation moves, and it is told which queries succeeded. | ||||
| CVE-2026-97969 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix clock leak and spurious timer in settimeout() msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which introduces two severe bugs: 1. If the watchdog is already active, calling start() again will increase the reference count of the clock again. However stop() is only called once, the reference count is unbalance. 2. If the watchdog is stopped, calling settimeout() will start the hardware timer accidentally. Factor out the register-writing logic into a helper function. Only call it in settimeout() if the watchdog is running. Otherwise, simply update `wdev->timeout`. | ||||
| CVE-2026-97970 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic. | ||||
| CVE-2026-97977 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix UAF of btusb_data by rx_work btusb_close() and btusb_flush() cancel data->rx_work with the asynchronous cancel_delayed_work(), so if btusb_rx_work() is already running on another CPU it keeps running after the cancel returns. btusb_disconnect() calls hci_unregister_dev(), which invokes btusb_close(), and then frees the btusb_data. A still running btusb_rx_work() then dereferences the freed data: while ((skb = skb_dequeue(&data->acl_q))) data->recv_acl(data->hdev, skb); Use cancel_delayed_work_sync() instead. In btusb_close() the cancel also has to happen after btusb_stop_traffic(), otherwise an URB completion racing with the cancel can requeue the work right after it has been waited for. | ||||
| CVE-2026-97866 | 1 Zhonglun | 1 Cloudpos | 2026-09-25 | 5.6 Medium |
| A weakness has been identified in Zhonglun CloudPOS 3.0. Affected by this vulnerability is an unknown functionality of the file Program.cs of the component Automatic Update. Executing a manipulation of the argument version/url/packagekey/package name can lead to channel accessible by non-endpoint. The attack can be launched remotely. Attacks of this nature are highly complex. The exploitation appears to be difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-74304 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device hu->serdev is NULL for hci_uart attached via non-serdev paths, but qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev) and dereferences the result, causing a NULL pointer dereference. Fix by guarding the dereference with a NULL check, consistent with the rest of qca_setup(). | ||||
| CVE-2026-72463 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix dev use-after-free in xfrm async resumption xfrm async resumption hold skb->dev refcnt until after transport_finish. However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking device reference, such as vti_rcv_cb. The subsequent async resumption will decrement the tunnel device's reference count, which lead to uaf of tunnel dev and refcnt leak of orig dev as below: unregister_netdevice: waiting for vti1 to become free. Usage count = -2 Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set by xfrm_rcv_cb can race with device teardown. Extend rcu protection over xfrm_rcv_cb and transport_finish to prevent races. | ||||
| CVE-2026-72315 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix busy dentry warning on unmount after DIO Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed the issue in cifs where deferred close of a file led to a dentry reference count not being released in umount, by flushing deferredclose_wq in cifs_kill_sb() to solve it. However, the cifs DIO path suffers from the same busy-dentry problem caused by a delayed dentry reference-count release: [dio] [cifsd] [close + umount] netfs_unbuffered_write_iter_locked ... cifs_demultiplex_thread netfs_unbuffered_write cifs_issue_write netfs_wait_for_in_progress_stream [1] ... netfs_write_subrequest_terminated netfs_subreq_clear_in_progress netfs_wake_collector // wake [1] netfs_put_subrequest netfs_put_request queue_work(system_dfl_wq, xxx) [2] // dio write return cifs_close _cifsFileInfo_put // cfile->count 2->1 --cfile->count [3] // umount cifs_kill_sb kill_anon_super // warning triggered! shrink_dcache_for_umount [4] [system_dfl_wq] [5] netfs_free_request ... _cifsFileInfo_put // cfile->count 1->0 --cfile->count queue_work(fileinfo_put_wq, xxx) [fileinfo_put_wq] [6] cifsFileInfo_put_work cifsFileInfo_put_final dput If the umount path is triggered before [5], it results warning: BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1) [unmount of cifs cifs] The existing per-inode ictx->io_count wait in cifs_evict_inode() does not help: it lives in the inode eviction path, which runs after shrink_dcache_for_umount() has already warned about the busy dentries. Fix it by adding a per-superblock outstanding-rreq counter that is incremented in cifs_init_request() and decremented in cifs_free_request(). In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach 0 - which guarantees that all cleanup_work for this sb have run and thus all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq. Then drain the workqueue so the dentry refs are dropped. This is a targeted wait, not a flush of the system-wide system_dfl_wq. | ||||
| CVE-2026-97991 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_blk: reject out-of-range sector starts vdpasim_blk_check_range() logs an invalid start sector but continues validating the request. The subsequent unsigned capacity subtraction can underflow and let an out-of-range buffer offset reach the data path. The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT copies guest data to blk->buffer + offset through vringh_iov_pull_iotlb(), causing an out-of-bounds write in _copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from blk->buffer + offset to the guest through vringh_iov_push_iotlb(), causing an out-of-bounds read in _copy_to_iter(). VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(), causing an out-of-bounds write. Reject starts at or beyond the capacity before the subtraction. Treat the capacity boundary as invalid because the IN and OUT paths round byte counts down to sectors for validation but later copy the original byte counts. A sub-sector request at the capacity boundary would otherwise still access past the end of the buffer. I found this bug myself, though the patch was written with AI assistance. | ||||