Export limit exceeded: 400270 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (400270 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97956 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: net_failover: Fix the deadlock in net_failover_slave_name_change() This is a sibling fix of commit b84c5632c7b3 ("net: net_failover: Fix the deadlock in slave register"). There is netdev_lock_ops() in the upper callers, so using netif_open() instead of dev_open(). Call Trace: __schedule+0x2bb/0x650 schedule+0x27/0xb0 schedule_preempt_disabled+0x15/0x30 __mutex_lock.constprop.0+0x550/0xaf0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3b/0x50 dev_open+0x3b/0xe0 net_failover_slave_name_change+0x22/0x40 failover_event+0xd4/0x1e0 notifier_call_chain+0x62/0xf0 raw_notifier_call_chain+0x16/0x30 call_netdevice_notifiers_info+0x50/0x80 netif_change_name+0x200/0x330 do_setlink.isra.0+0xb12/0xdf0 ? security_capable+0x9a/0x1e0 ? ns_capable+0x31/0x60 rtnl_setlink+0x302/0x670 ? netlink_recvmsg+0x296/0x340 ? security_capable+0x9a/0x1e0 ? __pfx_rtnl_setlink+0x10/0x10 rtnetlink_rcv_msg+0x384/0x460 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x61/0x120 rtnetlink_rcv+0x15/0x30 netlink_unicast+0x28f/0x3c0 netlink_sendmsg+0x216/0x450 __sys_sendto+0x222/0x230 __x64_sys_sendto+0x24/0x40 x64_sys_call+0x1d5d/0x2390 do_syscall_64+0x105/0x5a0 ? do_syscall_64+0x140/0x5a0 ? exc_page_fault+0x94/0x1e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2026-97957 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix mailbox segment buffer overflow check_mbox_seq_id_and_seg_len() validates that seq_id does not exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed MBOX_SEG_LEN (48). However, this allows the last segment (seq_id=42) to carry a full 48-byte payload, writing to offset 42*48=2016 for 48 bytes (ending at byte 2064). The receive buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a 16-byte heap buffer overflow. The hinic3 driver already handles this correctly by defining MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it exceeds the remaining buffer space. Apply the same fix to the hinic driver. | ||||
| CVE-2026-97960 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Prevent drain_pebs() reentry The PEBS buffer is shared by all events on a CPU, so drain_pebs() must not be reentered. If so, one instance may observe stale buffer state and potentially access out-of-bound memory. Most invocations happen in NMI context, which naturally prevents reentry. However, drain_pebs() is also reachable from process context via intel_pmu_drain_pebs_buffer(). In those paths, the PMU is often already disabled, but not guaranteed. For example, __intel_pmu_pebs_disable() only disables the target counter, so other active counters can still raise a PMI and interrupt an in-flight drain_pebs(). Here is an example, __perf_addr_filters_adjust() perf_event_stop() __perf_event_stop() x86_pmu_stop() (event->pmu->stop) intel_pmu_disable_event() intel_pmu_pebs_disable() __intel_pmu_pebs_disable() intel_pmu_drain_large_pebs() intel_pmu_drain_pebs_buffer() Introduce __intel_pmu_quiesce() and __intel_pmu_resume() helpers and use them in intel_pmu_drain_large_pebs() to disable the full PMU around the intel_pmu_drain_pebs_buffer() call, preventing reentry. Also add a warning in intel_pmu_drain_pebs_buffer() when the full PMU is not disabled. | ||||
| CVE-2026-97574 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Don't free the live ring's TPA state on queue restart failure bnxt_queue_mem_alloc() shallow copies the live RX ring into the clone: memcpy(clone, rxr, sizeof(*rxr)); the code currently clears pointers that the clone owns (such as rx_agg_bmap), but rx_tpa and rx_tpa_idx_map are left pointing at memory of the live ring that was cloned. If an allocation failure happens later and the err_free_tpa_info label is taken, the live ring's memory can be freed while still in use. Fix this by initializing the clone's pointers to NULL to prevent live ring state from being freed inadvertently. | ||||
| CVE-2026-97576 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC tile counts The stateless HEVC decoders read num_tile_columns_minus1 + 1 entries from column_width_minus1[] and num_tile_rows_minus1 + 1 from row_height_minus1[] and use them as tile-loop bounds, but std_validate_compound() does not bound these u8 counts. Reject a V4L2_CTRL_TYPE_HEVC_PPS with tiling enabled whose tile counts exceed the uAPI array capacity, mirroring the existing compound-control range checks. | ||||
| CVE-2026-97578 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: rockchip: guard VPU981 AV1 divisor and tile buffer rockchip_vpu981_av1_dec_set_tile_info() divides context_update_tile_id by tile_info->tile_cols and writes one descriptor per tile into the tile_info DMA buffer, which holds AV1_MAX_TILES entries; tile_cols and tile_rows come from the bitstream. Guard the division against a zero tile_cols by initialising the context-update values to zero and computing them only when tile_cols is non-zero, and stop the descriptor writes once the tile_info buffer is full. The tile geometry written to the hardware registers is left unmodified; the per-dimension and total tile bounds are enforced by the control validation. | ||||
| CVE-2026-97579 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity vdec_av1_slice_setup_tile() copies tile_cols + 1 / tile_rows + 1 entries into mi_col_starts[] / mi_row_starts[] from the bitstream tile_info. Bound the copy to the array capacity. | ||||
| CVE-2026-97969 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix clock leak and spurious timer in settimeout() msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which introduces two severe bugs: 1. If the watchdog is already active, calling start() again will increase the reference count of the clock again. However stop() is only called once, the reference count is unbalance. 2. If the watchdog is stopped, calling settimeout() will start the hardware timer accidentally. Factor out the register-writing logic into a helper function. Only call it in settimeout() if the watchdog is running. Otherwise, simply update `wdev->timeout`. | ||||
| CVE-2026-97975 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del() A NULL pointer dereference in klist_put() occurs when a child device (such as a BNEP network device in bnep_session) is concurrently being unregistered while hci_conn_del_sysfs() reparents child devices. This is caused by a race condition between hci_conn_del_sysfs() and concurrent child device unregistration (e.g. bnep_session calling unregister_netdev()). During device unregistration, device_del() snapshots a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the child device using device_find_any_child() and calls device_move() to reparent it to NULL, which removes the node from its parent's klist and clears knode_parent. Subsequently, device_del() calls klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing klist_put() to dereference knode_klist(n)->put on an already removed node, resulting in a NULL pointer dereference. This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix use-after-free in device_for_each_child()"), which replaced device_find_child(..., __match_tty) with device_find_any_child() in hci_conn_del_sysfs(). That change was intended to avoid a use-after-free where conn->dev outlived its parent hdev->dev when child devices held references to conn->dev, because conn->dev only held a reference to hdev->dev while registered in sysfs. Fix the issue properly by taking an explicit reference to the parent device with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with put_device(parent) in bt_link_release() when the conn device is freed. This ensures that hdev->dev remains valid for the entire lifecycle of conn->dev, resolving the underlying use-after-free. With the parent reference held properly, restore the __match_tty filter in hci_conn_del_sysfs() so that device_move() is only invoked on persistent RFCOMM TTY devices as originally intended, eliminating the race condition with unregistering network devices. | ||||
| CVE-2026-88264 | 2 Containers, Redhat | 5 Crun, Enterprise Linux, Hardened Images and 2 more | 2026-09-25 | 5.6 Medium |
| A flaw was found in crun. When the container configuration does not give /dev a dedicated mount, terminal setup can redirect /dev/console onto an attacker-controlled path, including via the read-only-rootfs bind-mount fallback. Affected versions are crun 1.29.1 and earlier. Default configurations that mount a fresh /dev are not exposed. No fixed release is available yet. | ||||
| CVE-2026-88839 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 6.7 Medium |
| BusyBox passwd/group tokenize() references a stale endpoint pointer after trimming, causing an out-of-bounds write of heap pointers. | ||||
| CVE-2026-88835 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 6.1 Medium |
| BusyBox dpkg read_package_field() steps past a NUL terminator on malformed .deb packages, causing an out-of-bounds heap read. | ||||
| CVE-2026-88837 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 6.5 Medium |
| BusyBox httpd treats yescrypt ($y$) password hashes as plaintext during Basic Authentication, inverting the authentication check. | ||||
| CVE-2026-88831 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 5.3 Medium |
| BusyBox httpd IP deny rules with invalid CIDR prefix lengths fail open, leaving a parsed IP with a zeroed mask so the rule matches no clients. | ||||
| CVE-2026-97589 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix wrong return code to engine in asynch callbacks When crypto_finalize_hash_request() or crypto_finalize_skcipher_request() explicitly completes a request, the do_one_request callback must return 0 to indicate successful handling. Returning a negative error code causes the crypto engine to assume the driver failed to take ownership and triggers a second completion via crypto_request_complete(), resulting in a double completion. This pattern occurs in paes_s390.c 4 times and once in phmac_s390.c. Fixed in phmac_do_one_request() and all four paes do_one_request callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit finalization instead of propagating the error code. | ||||
| CVE-2026-97594 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: landlock: Fix use-after-free of the source's parent directory current_check_refer_path() reads old_dentry->d_parent without holding a reference nor a lock on it, and then dereferences it in collect_domain_accesses() and in the audit record. A reference on a child does not pin its parent: __d_move() reassigns dentry->d_parent and drops the reference the child held on its former parent. hook_path_rename() is not affected because the rename path calls lock_rename() before the hook, so the source cannot be reparented under it. hook_path_link() has no such protection: filename_linkat() holds a reference on the source dentry but neither locks nor references its parent, so a concurrent rename(2) can reparent the source while security_path_link() runs, and the former parent can then be removed and freed while the hook walks it. A process can trigger this after entering a Landlock domain that handles at least one filesystem access right. The process can then race a linkat(2) loop against rename(2) and rmdir(2): BUG: KASAN: slab-use-after-free in collect_domain_accesses+0x278/0x290 Read of size 4 at addr ffff888160bd53f4 by task llrepro2/549 collect_domain_accesses+0x278/0x290 current_check_refer_path+0x952/0x1120 security_path_link+0x1be/0x320 filename_linkat+0x342/0x6d0 __x64_sys_linkat+0xfa/0x150 Freed by task 562: kmem_cache_free+0x139/0x4c0 i_callback+0x4b/0x80 rcu_core+0x7dc/0x10a0 Take a reference on the dentry selected as the source parent, using dget() for the common-mount-root case and dget_parent() otherwise. Release it after the hierarchy walk and synchronous audit logging. [mic: Clarify the caller, reachability, and reference handling] | ||||
| CVE-2026-97617 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Check resize_disabled before publishing the new subbuf order ring_buffer_subbuf_order_set() stores the new order and only then walks the CPUs, returning -EBUSY if any of them has resizing disabled. A user mapped buffer has resizing disabled, and __rb_map_vma() reads buffer->subbuf_order without buffer->mutex, so an mmap of an already mapped CPU racing the failing order change sizes the mapping with the new order and inserts pages past the sub-buffer into the VMA. Check the CPUs before storing the new order. | ||||
| CVE-2026-97901 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: genetlink: pin family module during policy dump The generic netlink controller's policy dump keeps pointers to the target family's operation and policy tables in its callback state. A dump may be split across multiple skbs and remain pending after the initial request. Netlink pins the module which owns the dump callback, but in this case that is the controller's owner rather than the target family's owner. The target family can consequently be unregistered and its module unloaded while a policy dump is pending. Advancing the dump then dereferences policy memory from the unloaded module. Take a reference to the target family's module when the dump starts. Drop it from the error and done paths. This matches the lifetime for which the dump context retains the family and policy pointers. | ||||
| CVE-2026-97912 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure SRAM size is 0 on mapping failure On a mapping failure of the SRAM, the SRAM size is left as non-zero. The probe will succeed as the error return is not checked since having SRAM is not a hard requirement. The non-zero size allows jobs to access SRAM which is left pointing to physical base address 0x0. | ||||
| CVE-2026-97915 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Limit firmware log name prints to field size The name in struct vpu_tracing_buffer_header is a fixed-size array populated by the NPU firmware. It is expected to be NUL-terminated, but nothing on the host side enforces this, so printing it with an unbounded string conversion would read past the field if the terminator is ever missing and expose adjacent bytes of the shared tracing BO through dmesg and the debugfs FW log output. Print at most as many characters as the name field holds, so the output never runs past it even if the string is not NUL-terminated. | ||||